[PATCH v2] drm/amdkfd: Fix circular locking dependency warning
Felix Kuehling
felix.kuehling at amd.com
Wed Jun 24 16:56:05 UTC 2020
Am 2020-06-24 um 12:06 p.m. schrieb Mukul Joshi:
> Lockdep is spewing circular locking dependency warning when
> reading SDMA usage stats.
>
> 150.887733] ======================================================
> [ 150.893903] WARNING: possible circular locking dependency detected
> [ 150.905917] ------------------------------------------------------
> [ 150.912129] kfdtest/4081 is trying to acquire lock:
> [ 150.917002] ffff8f7f3762e118 (&mm->mmap_sem#2){++++}, at:
> __might_fault+0x3e/0x90
> [ 150.924490]
> but task is already holding lock:
> [ 150.930320] ffff8f7f49d229e8 (&dqm->lock_hidden){+.+.}, at:
> destroy_queue_cpsch+0x29/0x210 [amdgpu]
> [ 150.939432]
> which lock already depends on the new lock.
> [ 150.947603]
> the existing dependency chain (in reverse order) is:
> [ 150.955074]
> -> #3 (&dqm->lock_hidden){+.+.}:
> [ 150.960822] __mutex_lock+0xa1/0x9f0
> [ 150.964996] evict_process_queues_cpsch+0x22/0x120 [amdgpu]
> [ 150.971155] kfd_process_evict_queues+0x3b/0xc0 [amdgpu]
> [ 150.977054] kgd2kfd_quiesce_mm+0x25/0x60 [amdgpu]
> [ 150.982442] amdgpu_amdkfd_evict_userptr+0x35/0x70 [amdgpu]
> [ 150.988615] amdgpu_mn_invalidate_hsa+0x41/0x60 [amdgpu]
> [ 150.994448] __mmu_notifier_invalidate_range_start+0xa4/0x240
> [ 151.000714] copy_page_range+0xd70/0xd80
> [ 151.005159] dup_mm+0x3ca/0x550
> [ 151.008816] copy_process+0x1bdc/0x1c70
> [ 151.013183] _do_fork+0x76/0x6c0
> [ 151.016929] __x64_sys_clone+0x8c/0xb0
> [ 151.021201] do_syscall_64+0x4a/0x1d0
> [ 151.025404] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 151.030977]
> -> #2 (&adev->notifier_lock){+.+.}:
> [ 151.036993] __mutex_lock+0xa1/0x9f0
> [ 151.041168] amdgpu_mn_invalidate_hsa+0x30/0x60 [amdgpu]
> [ 151.047019] __mmu_notifier_invalidate_range_start+0xa4/0x240
> [ 151.053277] copy_page_range+0xd70/0xd80
> [ 151.057722] dup_mm+0x3ca/0x550
> [ 151.061388] copy_process+0x1bdc/0x1c70
> [ 151.065748] _do_fork+0x76/0x6c0
> [ 151.069499] __x64_sys_clone+0x8c/0xb0
> [ 151.073765] do_syscall_64+0x4a/0x1d0
> [ 151.077952] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 151.083523]
> -> #1 (mmu_notifier_invalidate_range_start){+.+.}:
> [ 151.090833] change_protection+0x802/0xab0
> [ 151.095448] mprotect_fixup+0x187/0x2d0
> [ 151.099801] setup_arg_pages+0x124/0x250
> [ 151.104251] load_elf_binary+0x3a4/0x1464
> [ 151.108781] search_binary_handler+0x6c/0x210
> [ 151.113656] __do_execve_file.isra.40+0x7f7/0xa50
> [ 151.118875] do_execve+0x21/0x30
> [ 151.122632] call_usermodehelper_exec_async+0x17e/0x190
> [ 151.128393] ret_from_fork+0x24/0x30
> [ 151.132489]
> -> #0 (&mm->mmap_sem#2){++++}:
> [ 151.138064] __lock_acquire+0x11a1/0x1490
> [ 151.142597] lock_acquire+0x90/0x180
> [ 151.146694] __might_fault+0x68/0x90
> [ 151.150879] read_sdma_queue_counter+0x5f/0xb0 [amdgpu]
> [ 151.156693] update_sdma_queue_past_activity_stats+0x3b/0x90 [amdgpu]
> [ 151.163725] destroy_queue_cpsch+0x1ae/0x210 [amdgpu]
> [ 151.169373] pqm_destroy_queue+0xf0/0x250 [amdgpu]
> [ 151.174762] kfd_ioctl_destroy_queue+0x32/0x70 [amdgpu]
> [ 151.180577] kfd_ioctl+0x223/0x400 [amdgpu]
> [ 151.185284] ksys_ioctl+0x8f/0xb0
> [ 151.189118] __x64_sys_ioctl+0x16/0x20
> [ 151.193389] do_syscall_64+0x4a/0x1d0
> [ 151.197569] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 151.203141]
> other info that might help us debug this:
>
> [ 151.211140] Chain exists of:
> &mm->mmap_sem#2 --> &adev->notifier_lock --> &dqm->lock_hidden
>
> 151.222535] Possible unsafe locking scenario:
>
> [ 151.228447] CPU0 CPU1
> [ 151.232971] ---- ----
> [ 151.237502] lock(&dqm->lock_hidden);
> [ 151.241254] lock(&adev->notifier_lock);
> [ 151.247774] lock(&dqm->lock_hidden);
> [ 151.254038] lock(&mm->mmap_sem#2);
> [ 151.257610]
>
> This commit fixes the warning by ensuring get_user() is not called
> while reading SDMA stats with dqm_lock held as get_user() could cause a
> page fault which leads to the circular locking scenario.
>
> Signed-off-by: Mukul Joshi <mukul.joshi at amd.com>
A few coding-style nit-picks inline. Please also run the patch through
checkpatch.pl. With those fixed, the patch is
Reviewed-by: Felix Kuehling <Felix.Kuehling at amd.com>
> ---
> .../drm/amd/amdkfd/kfd_device_queue_manager.c | 75 +++++----
> .../drm/amd/amdkfd/kfd_device_queue_manager.h | 3 +-
> drivers/gpu/drm/amd/amdkfd/kfd_process.c | 145 +++++++++++++++---
> 3 files changed, 162 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> index 21eb0998c4ae..57e579876037 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> @@ -153,24 +153,23 @@ static void decrement_queue_count(struct device_queue_manager *dqm,
> dqm->active_cp_queue_count--;
> }
>
> -int read_sdma_queue_counter(struct queue *q, uint64_t *val)
> +int read_sdma_queue_counter(uint64_t q_rptr, uint64_t *val)
> {
> int ret;
> uint64_t tmp = 0;
>
> - if (!q || !val)
> + if (!val)
> return -EINVAL;
> /*
> * SDMA activity counter is stored at queue's RPTR + 0x8 location.
> */
> - if (!access_ok((const void __user *)((uint64_t)q->properties.read_ptr +
> + if (!access_ok((const void __user *)(q_rptr +
> sizeof(uint64_t)), sizeof(uint64_t))) {
> pr_err("Can't access sdma queue activity counter\n");
> return -EFAULT;
> }
>
> - ret = get_user(tmp, (uint64_t *)((uint64_t)(q->properties.read_ptr) +
> - sizeof(uint64_t)));
> + ret = get_user(tmp, (uint64_t *)(q_rptr + sizeof(uint64_t)));
> if (!ret) {
> *val = tmp;
> }
> @@ -178,27 +177,6 @@ int read_sdma_queue_counter(struct queue *q, uint64_t *val)
> return ret;
> }
>
> -static int update_sdma_queue_past_activity_stats(struct kfd_process_device *pdd,
> - struct queue *q)
> -{
> - int ret;
> - uint64_t val = 0;
> -
> - if (!pdd)
> - return -ENODEV;
> -
> - ret = read_sdma_queue_counter(q, &val);
> - if (ret) {
> - pr_err("Failed to read SDMA queue counter for queue: %d\n",
> - q->properties.queue_id);
> - return ret;
> - }
> -
> - pdd->sdma_past_activity_counter += val;
> -
> - return ret;
> -}
> -
> static int allocate_doorbell(struct qcm_process_device *qpd, struct queue *q)
> {
> struct kfd_dev *dev = qpd->dqm->dev;
> @@ -533,11 +511,6 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,
> if (retval == -ETIME)
> qpd->reset_wavefronts = true;
>
> - /* Get the SDMA queue stats */
> - if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> - (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> - update_sdma_queue_past_activity_stats(qpd_to_pdd(qpd), q);
> - }
>
> mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
>
> @@ -573,9 +546,24 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm,
> struct queue *q)
> {
> int retval;
> + uint64_t sdma_val = 0;
> + struct kfd_process_device *pdd = qpd_to_pdd(qpd);
> +
> + /* Get the SDMA queue stats */
> + if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> + (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> + retval = read_sdma_queue_counter((uint64_t)q->properties.read_ptr,
> + &sdma_val);
> + if (retval) {
No braces needed here.
> + pr_err("Failed to read SDMA queue counter for queue: %d\n",
> + q->properties.queue_id);
> + }
> + }
>
> dqm_lock(dqm);
> retval = destroy_queue_nocpsch_locked(dqm, qpd, q);
> + if (!retval)
> + pdd->sdma_past_activity_counter += sdma_val;
> dqm_unlock(dqm);
>
> return retval;
> @@ -1480,6 +1468,19 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
> {
> int retval;
> struct mqd_manager *mqd_mgr;
> + uint64_t sdma_val = 0;
> + struct kfd_process_device *pdd = qpd_to_pdd(qpd);
> +
> + /* Get the SDMA queue stats */
> + if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> + (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> + retval = read_sdma_queue_counter((uint64_t)q->properties.read_ptr,
> + &sdma_val);
> + if (retval) {
No braces needed here.
> + pr_err("Failed to read SDMA queue counter for queue: %d\n",
> + q->properties.queue_id);
> + }
> + }
>
> retval = 0;
>
> @@ -1501,10 +1502,11 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
>
> deallocate_doorbell(qpd, q);
>
> - if (q->properties.type == KFD_QUEUE_TYPE_SDMA)
> - deallocate_sdma_queue(dqm, q);
> - else if (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)
> + if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> + (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> deallocate_sdma_queue(dqm, q);
> + pdd->sdma_past_activity_counter += sdma_val;
> + }
>
> list_del(&q->list);
> qpd->queue_count--;
> @@ -1520,11 +1522,6 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
> }
> }
>
> - /* Get the SDMA queue stats */
> - if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> - (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> - update_sdma_queue_past_activity_stats(qpd_to_pdd(qpd), q);
> - }
> /*
> * Unconditionally decrement this counter, regardless of the queue's
> * type
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
> index 894bcf877f9e..49d8e324c636 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
> @@ -251,6 +251,5 @@ static inline void dqm_unlock(struct device_queue_manager *dqm)
> mutex_unlock(&dqm->lock_hidden);
> }
>
> -int read_sdma_queue_counter(struct queue *q, uint64_t *val);
> -
> +int read_sdma_queue_counter(uint64_t q_rptr, uint64_t *val);
> #endif /* KFD_DEVICE_QUEUE_MANAGER_H_ */
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
> index 8616a204e4c3..6dd1c861007b 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
> @@ -86,6 +86,13 @@ struct kfd_sdma_activity_handler_workarea {
> uint64_t sdma_activity_counter;
> };
>
> +struct temp_sdma_queue_list {
> + uint64_t rptr;
> + uint64_t sdma_val;
> + unsigned int queue_id;
> + struct list_head list;
> +};
> +
> static void kfd_sdma_activity_worker(struct work_struct *work)
> {
> struct kfd_sdma_activity_handler_workarea *workarea;
> @@ -96,6 +103,8 @@ static void kfd_sdma_activity_worker(struct work_struct *work)
> struct qcm_process_device *qpd;
> struct device_queue_manager *dqm;
> int ret = 0;
> + struct temp_sdma_queue_list sdma_q_list;
> + struct temp_sdma_queue_list *sdma_q, *next;
>
> workarea = container_of(work, struct kfd_sdma_activity_handler_workarea,
> sdma_activity_work);
> @@ -109,41 +118,137 @@ static void kfd_sdma_activity_worker(struct work_struct *work)
> qpd = &pdd->qpd;
> if (!dqm || !qpd)
> return;
> + /*
> + * Total SDMA activity is current SDMA activity + past SDMA activity
> + * Past SDMA count is stored in pdd.
> + * To get the current activity counters for all active SDMA queues,
> + * we loop over all SDMA queues and get their counts from user-space.
> + *
> + * We cannot call get_user() with dqm_lock held as it can cause
> + * a circular lock dependency situation. To read the SDMA stats,
> + * we need to do the following:
> + *
> + * 1. Create a temporary list of SDMA queue nodes from the qpd->queues_list,
> + * with dqm_lock/dqm_unlock().
> + * 2. Call get_user() for each node in temporary list without dqm_lock.
> + * Save the SDMA count for each node and also add the count to the total
> + * SDMA count counter.
> + * Its possible, during this step, a few SDMA queue nodes got deleted
> + * from the qpd->queues_list.
> + * 3. Do a second pass over qpd->queues_list to check if any nodes got deleted.
> + * If any node got deleted, its SDMA count would be captured in the sdma
> + * past activity counter. So subtract the SDMA counter stored in step 2
> + * for this node from the total SDMA count.
> + */
> + INIT_LIST_HEAD(&sdma_q_list.list);
>
> - mm = get_task_mm(pdd->process->lead_thread);
> - if (!mm) {
> - return;
> + /*
> + * Create the temp list of all SDMA queues
> + */
> + dqm_lock(dqm);
> +
> + list_for_each_entry(q, &qpd->queues_list, list) {
> + if ((q->properties.type != KFD_QUEUE_TYPE_SDMA) &&
> + (q->properties.type != KFD_QUEUE_TYPE_SDMA_XGMI))
> + continue;
> +
> + sdma_q = kzalloc(sizeof(struct temp_sdma_queue_list), GFP_KERNEL);
> + if (!sdma_q) {
> + dqm_unlock(dqm);
> + goto cleanup;
> + }
> +
> + INIT_LIST_HEAD(&sdma_q->list);
> + sdma_q->rptr = (uint64_t)q->properties.read_ptr;
> + sdma_q->queue_id = q->properties.queue_id;
> + list_add_tail(&sdma_q->list, &sdma_q_list.list);
> }
>
> - use_mm(mm);
> + /*
> + * If the temp list is empty, then no SDMA queues nodes were found in
> + * qpd->queues_list. Return the past activity count as the total sdma
> + * count
> + */
> + if (list_empty(&sdma_q_list.list)) {
> + workarea->sdma_activity_counter = pdd->sdma_past_activity_counter;
> + dqm_unlock(dqm);
> + return;
> + }
>
> - dqm_lock(dqm);
> + dqm_unlock(dqm);
>
> /*
> - * Total SDMA activity is current SDMA activity + past SDMA activity
> + * Get the usage count for each SDMA queue in temp_list.
> */
> - workarea->sdma_activity_counter = pdd->sdma_past_activity_counter;
> + mm = get_task_mm(pdd->process->lead_thread);
> + if (!mm)
> + goto cleanup;
> +
> + use_mm(mm);
> +
> + list_for_each_entry(sdma_q, &sdma_q_list.list, list) {
> + val = 0;
> + ret = read_sdma_queue_counter(sdma_q->rptr, &val);
> + if (ret)
> + pr_debug("Failed to read SDMA queue active "
> + "counter for queue id: %d",
Having a line longer than 80 characters is better than breaking a string
like that. Breaking strings makes it harder to grep for them. A long
line is a warning in checkpatch.pl. A broken string may actually be
considered an error.
> + sdma_q->queue_id);
> + else {
Inconsistent indentation. The "else" should be at the same level as the
"if". Also, if you need braces in one if-else branch, it's better to use
braces on all of them for consistency and readability.
> + sdma_q->sdma_val = val;
> + workarea->sdma_activity_counter += val;
> + }
> + }
> +
> + unuse_mm(mm);
> + mmput(mm);
>
> /*
> - * Get the current activity counters for all active SDMA queues
> + * Do a second iteration over qpd_queues_list to check if any SDMA
> + * nodes got deleted while fetching SDMA counter.
> */
> + dqm_lock(dqm);
> +
> + workarea->sdma_activity_counter += pdd->sdma_past_activity_counter;
> +
> list_for_each_entry(q, &qpd->queues_list, list) {
> - if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
> - (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)) {
> - val = 0;
> - ret = read_sdma_queue_counter(q, &val);
> - if (ret)
> - pr_debug("Failed to read SDMA queue active "
> - "counter for queue id: %d",
> - q->properties.queue_id);
> - else
> - workarea->sdma_activity_counter += val;
> + if (list_empty(&sdma_q_list.list)) {
No braces needed here.
Regards,
Felix
> + break;
> + }
> +
> + if ((q->properties.type != KFD_QUEUE_TYPE_SDMA) &&
> + (q->properties.type != KFD_QUEUE_TYPE_SDMA_XGMI))
> + continue;
> +
> + list_for_each_entry_safe(sdma_q, next, &sdma_q_list.list, list) {
> + if (((uint64_t)q->properties.read_ptr == sdma_q->rptr) &&
> + (sdma_q->queue_id == q->properties.queue_id)) {
> + list_del(&sdma_q->list);
> + kfree(sdma_q);
> + break;
> + }
> }
> }
>
> dqm_unlock(dqm);
> - unuse_mm(mm);
> - mmput(mm);
> +
> + /*
> + * If temp list is not empty, it implies some queues got deleted
> + * from qpd->queues_list during SDMA usage read. Subtract the SDMA
> + * count for each node from the total SDMA count.
> + */
> + list_for_each_entry_safe(sdma_q, next, &sdma_q_list.list, list) {
> + workarea->sdma_activity_counter -= sdma_q->sdma_val;
> + list_del(&sdma_q->list);
> + kfree(sdma_q);
> + }
> +
> + return;
> +
> +cleanup:
> + list_for_each_entry_safe(sdma_q, next, &sdma_q_list.list, list) {
> + list_del(&sdma_q->list);
> + kfree(sdma_q);
> + }
> }
>
> static ssize_t kfd_procfs_show(struct kobject *kobj, struct attribute *attr,
More information about the amd-gfx
mailing list