[PATCH 0/6] RFC Support hot device unplug in amdgpu
Andrey Grodzovsky
Andrey.Grodzovsky at amd.com
Mon May 11 16:37:40 UTC 2020
On 5/11/20 5:26 AM, Pekka Paalanen wrote:
> On Sat, 9 May 2020 14:51:44 -0400
> Andrey Grodzovsky <andrey.grodzovsky at amd.com> wrote:
>
>> This RFC is a more of a proof of concept then a fully working
>> solution as there are a few unresolved issues we are hopping to get
>> advise on from people on the mailing list. Until now extracting a
>> card either by physical extraction (e.g. eGPU with thunderbold
>> connection or by emulation through syfs
>> -> /sys/bus/pci/devices/device_id/remove) would cause random crashes
>> in user apps. The random crashes in apps were mostly due to the app
>> having mapped a device backed BO into it's adress space was still
>> trying to access the BO while the backing device was gone. To answer
>> this first problem Christian suggested to fix the handling of mapped
>> memory in the clients when the device goes away by forcibly unmap all
>> buffers the user processes has by clearing their respective VMAs
>> mapping the device BOs. Then when the VMAs try to fill in the page
>> tables again we check in the fault handler if the device is removed
>> and if so, return an error. This will generate a SIGBUS to the
>> application which can then cleanly terminate. This indeed was done
>> but this in turn created a problem of kernel OOPs were the OOPSes
>> were due to the fact that while the app was terminating because of
>> the SIGBUS it would trigger use after free in the driver by calling
>> to accesses device structures that were already released from the pci
>> remove sequence. This we handled by introducing a 'flush' seqence
>> during device removal were we wait for drm file reference to drop to
>> 0 meaning all user clients directly using this device terminated.
>> With this I was able to cleanly emulate device unplug with X and
>> glxgears running and later emulate device plug back and restart of X
>> and glxgears.
>>
>> But this use case is only partial and as I see it all the use cases
>> are as follwing and the questions it raises.
>>
>> 1) Application accesses a BO by opening drm file
>> 1.1) BO is mapped into applications address space (BO is CPU visible) - this one we have a solution for by invaldating BO's CPU mapping casuing SIGBUS
>> and termination and waiting for drm file refcound to drop to 0 before releasing the device
>> 1.2) BO is not mapped into applcation address space (BO is CPU invisible) - no solution yet because how we force the application to terminate in this case ?
>>
>> 2) Application accesses a BO by importing a DMA-BUF
>> 2.1) BO is mapped into applications address space (BO is CPU visible) - solution is same as 1.1 but instead of waiting for drm file release we wait for the
>> imported dma-buf's file release
>> 2.2) BO is not mapped into applcation address space (BO is CPU invisible) - our solution is to invalidate GPUVM page tables and destroy backing storage for
>> all exported BOs which will in turn casue VM faults in the importing device and then when the importing driver will try to re-attach the imported BO to
>> update mappings we return -ENODEV in the import hook which hopeffuly will cause the user app to terminate.
>>
>> 3) Applcation opens a drm file or imports a dma-bud and holds a reference but never access any BO or does access but never more after device was unplug - how would we
>> force this applcation to termiante before proceeding with device removal code ? Otherwise the wait in pci remove just hangs for ever.
>>
>> The attached patches adress 1.1, 2.1 and 2.2, for now only 1.1 fully tested and I am still testing the others but I will be happy for any advise on all the
>> described use cases and maybe some alternative and better (more generic) approach to this like maybe obtaining PIDs of relevant processes through some revere
>> mapping from device file and exported dma-buf files and send them SIGKILL - would this make more sense or any other method ?
>>
>> Patches 1-3 address 1.1
>> Patch 4 addresses 2.1
>> Pathces 5-6 address 2.2
>>
>> Reference: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.freedesktop.org%2Fdrm%2Famd%2F-%2Fissues%2F1081&data=02%7C01%7Candrey.grodzovsky%40amd.com%7C6f92386d0dd444de4fe608d7f58d5ae9%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637247860388177520&sdata=xg3zrilEwSCR7icmkKVVzZwiI11XvmGR%2Bca8nOWBiDM%3D&reserved=0
> Hi,
>
> how did you come up with the goal "make applications terminate"? Is
> that your end goal, or is it just step 1 of many on the road of
> supporting device hot-unplug?
Just as an effort to improve the current situation where we have
unexpected random crashes following device removal.
>
> Why do you want to terminate also applications that don't "need" to
> terminate? Why hunt them down? I'm referring to your points 1.2, 2.2
> and 3.
Because when those applications do exit and since they hold a reference
to drm device through their open device file descriptor or dma-buf file
descriptor we end up in use after free situation where during pci remove
we already released everything but now last drm_dev_put release callback
is trying to access those released structures. Any way, as you and
Daniel pointed out forcing termination is a bad approach. Seems we need
to actually keep all the drm structures around until the very last
device reference is dropped while in the meatime returning error code
for any new IOCTLs and rerouting any page fault to zero page.
Thanks for the detailed response.
Andrey
>
> From an end user perspective, I believe making applications terminate
> is not helpful at all. Your display server still disappears, which
> means all your apps are forced to quit, and you lose your desktop. I do
> understand that a graceful termination is better than a hard lockup,
> but not much.
>
> When I've talked about DRM device hot-unplug with Daniel Vetter, our
> shared opinion seems to be that the unplug should not outright kill any
> programs that are prepared to handle errors, that is, functions or
> ioctls that return a success code can return an error, and then it is
> up for the application to decide how to handle that. The end goal must
> not be to terminate all applications that had something to do with the
> device. At the very least the display server must survive.
>
> The rough idea on how that should work is that DRM ioctls start
> returning errors and all mmaps are replaced with something harmless
> that does not cause a SIGBUS. Userspace can handle the errors if it
> wants to, and display servers will react to the device removed uevent
> if not earlier.
>
> Why deliberately avoid raising SIGBUS? Because it is such a huge pain
> to handle due to the archaic design of how signals are delivered. Most
> of existing userspace is also not prepared to handle SIGBUS anywhere.
>
> The problem of handling SIGBUS at all is that a process can only have a
> single signal handler per signal, but the process may comprise of
> multiple components that cannot cooperate on signal catching: Mesa GPU
> drivers, GUI toolkits, and the application itself may all do some
> things that would require handling SIGBUS if removing a DRM device
> raised it. For Mesa to cooperate with SIGBUS handling with the other
> components in the process, we'd need some whole new APIs, an EGL
> extension and maybe Vulkan extension too. The process may also have
> threads, which are really painful with signals. What if you need to
> handle the SIGBUS differently in different threads?
>
> Hence, mmaps should be replaced with something harmless, maybe
> something that reads back all zeros and ignores writes. The application
> will learn later that the DRM device is gone. Sending it a SIGBUS on
> the spot when it accesses an mmap does not help: the memory is gone
> already - if you didn't have a backup of the contents, you're not going
> to make one now.
>
> My point here is, are you designing things to specifically only
> terminate processes, or will you leave room in the design to improve the
> implementation towards a proper handling of DRM device hot-unplug?
>
>
> Thanks,
> pq
>
>
>> Andrey Grodzovsky (6):
>> drm/ttm: Add unampping of the entire device address space
>> drm/amdgpu: Force unmap all user VMAs on device removal.
>> drm/amdgpu: Wait for all user clients
>> drm/amdgpu: Wait for all clients importing out dma-bufs.
>> drm/ttm: Add destroy flag in TTM BO eviction interface
>> drm/amdgpu: Use TTM MMs destroy interface
>>
>> drivers/gpu/drm/amd/amdgpu/amdgpu.h | 3 ++
>> drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 2 +-
>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 7 +++-
>> drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c | 27 ++++++++++++-
>> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 22 ++++++++--
>> drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 9 +++++
>> drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 ++
>> drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 17 +++++++-
>> drivers/gpu/drm/amd/amdgpu/amdgpu_object.h | 1 +
>> drivers/gpu/drm/nouveau/nouveau_drm.c | 2 +-
>> drivers/gpu/drm/qxl/qxl_object.c | 4 +-
>> drivers/gpu/drm/radeon/radeon_object.c | 2 +-
>> drivers/gpu/drm/ttm/ttm_bo.c | 63 +++++++++++++++++++++--------
>> drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 6 +--
>> include/drm/ttm/ttm_bo_api.h | 2 +-
>> include/drm/ttm/ttm_bo_driver.h | 2 +
>> 16 files changed, 139 insertions(+), 34 deletions(-)
>>
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Candrey.grodzovsky%40amd.com%7C6f92386d0dd444de4fe608d7f58d5ae9%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637247860388197434&sdata=Unqh9pySrEsPeAFLxzmI0deAlPF29%2FfXLMdSl8Jsvgo%3D&reserved=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20200511/7eeadc24/attachment-0001.htm>
More information about the amd-gfx
mailing list