[PATCH 3/4] drm/amd/powerplay: remove SRIOV check in SMU11
Quan, Evan
Evan.Quan at amd.com
Tue May 26 11:24:37 UTC 2020
[AMD Official Use Only - Internal Distribution Only]
Please confirm the changes of arcturus_get_power_profile_mode() do not break SRIOV.
Since this seems skipped before but enabled now.
Other than that, the series is acked-by: Evan Quan <evan.quan at amd.com>
-----Original Message-----
From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of Wenhui Sheng
Sent: Tuesday, May 26, 2020 6:06 PM
To: amd-gfx at lists.freedesktop.org
Cc: Sheng, Wenhui <Wenhui.Sheng at amd.com>; Zhang, Hawking <Hawking.Zhang at amd.com>
Subject: [PATCH 3/4] drm/amd/powerplay: remove SRIOV check in SMU11
We don't need SRIOV check after we enable SMC msg filter in SMU11
Signed-off-by: Wenhui Sheng <Wenhui.Sheng at amd.com>
Change-Id: I14e1dc5669cb4bb2c112bc100d699bfb380574b3
Reviewed-by: Hawking Zhang <Hawking.Zhang at amd.com>
---
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 159 +++++++++----------
drivers/gpu/drm/amd/powerplay/arcturus_ppt.c | 6 +-
drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 6 +-
drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 24 ---
4 files changed, 80 insertions(+), 115 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index f7428996cc74..1e9be1dcc62b 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -563,10 +563,8 @@ int smu_update_table(struct smu_context *smu, enum smu_table_id table_index, int
bool is_support_sw_smu(struct amdgpu_device *adev) {
-if (adev->asic_type >= CHIP_ARCTURUS) {
- if (amdgpu_sriov_is_pp_one_vf(adev) || !amdgpu_sriov_vf(adev))
-return true;
-}
+if (adev->asic_type >= CHIP_ARCTURUS)
+return true;
return false;
}
@@ -1109,59 +1107,58 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
return ret;
/* smu_dump_pptable(smu); */
-if (!amdgpu_sriov_vf(adev)) {
-/*
- * Copy pptable bo in the vram to smc with SMU MSGs such as
- * SetDriverDramAddr and TransferTableDram2Smu.
- */
-ret = smu_write_pptable(smu);
-if (ret)
-return ret;
-
-/* issue Run*Btc msg */
-ret = smu_run_btc(smu);
-if (ret)
-return ret;
-ret = smu_feature_set_allowed_mask(smu);
-if (ret)
-return ret;
+/*
+ * Copy pptable bo in the vram to smc with SMU MSGs such as
+ * SetDriverDramAddr and TransferTableDram2Smu.
+ */
+ret = smu_write_pptable(smu);
+if (ret)
+return ret;
-ret = smu_system_features_control(smu, true);
-if (ret)
-return ret;
+/* issue Run*Btc msg */
+ret = smu_run_btc(smu);
+if (ret)
+return ret;
+ret = smu_feature_set_allowed_mask(smu);
+if (ret)
+return ret;
-if (adev->asic_type == CHIP_NAVI10) {
-if ((adev->pdev->device == 0x731f && (adev->pdev->revision == 0xc2 ||
- adev->pdev->revision == 0xc3 ||
- adev->pdev->revision == 0xca ||
- adev->pdev->revision == 0xcb)) ||
- (adev->pdev->device == 0x66af && (adev->pdev->revision == 0xf3 ||
- adev->pdev->revision == 0xf4 ||
- adev->pdev->revision == 0xf5 ||
- adev->pdev->revision == 0xf6))) {
-ret = smu_disable_umc_cdr_12gbps_workaround(smu);
-if (ret) {
-pr_err("Workaround failed to disable UMC CDR feature on 12Gbps SKU!\n");
-return ret;
-}
-}
-}
+ret = smu_system_features_control(smu, true);
+if (ret)
+return ret;
-if (smu->ppt_funcs->set_power_source) {
-/*
- * For Navi1X, manually switch it to AC mode as PMFW
- * may boot it with DC mode.
- */
-if (adev->pm.ac_power)
-ret = smu_set_power_source(smu, SMU_POWER_SOURCE_AC);
-else
-ret = smu_set_power_source(smu, SMU_POWER_SOURCE_DC);
+if (adev->asic_type == CHIP_NAVI10) {
+if ((adev->pdev->device == 0x731f && (adev->pdev->revision == 0xc2 ||
+ adev->pdev->revision == 0xc3 ||
+ adev->pdev->revision == 0xca ||
+ adev->pdev->revision == 0xcb)) ||
+ (adev->pdev->device == 0x66af && (adev->pdev->revision == 0xf3 ||
+ adev->pdev->revision == 0xf4 ||
+ adev->pdev->revision == 0xf5 ||
+ adev->pdev->revision == 0xf6))) {
+ret = smu_disable_umc_cdr_12gbps_workaround(smu);
if (ret) {
-pr_err("Failed to switch to %s mode!\n", adev->pm.ac_power ? "AC" : "DC");
+pr_err("Workaround failed to disable UMC CDR feature on 12Gbps
+SKU!\n");
return ret;
}
}
}
+
+if (smu->ppt_funcs->set_power_source) {
+/*
+ * For Navi1X, manually switch it to AC mode as PMFW
+ * may boot it with DC mode.
+ */
+if (adev->pm.ac_power)
+ret = smu_set_power_source(smu, SMU_POWER_SOURCE_AC);
+else
+ret = smu_set_power_source(smu, SMU_POWER_SOURCE_DC);
+if (ret) {
+pr_err("Failed to switch to %s mode!\n", adev->pm.ac_power ? "AC" : "DC");
+return ret;
+}
+}
+
if (adev->asic_type != CHIP_ARCTURUS) {
ret = smu_notify_display_change(smu);
if (ret)
@@ -1214,9 +1211,8 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
/*
* Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools.
*/
-if (!amdgpu_sriov_vf(adev)) {
-ret = smu_set_tool_table_location(smu);
-}
+ret = smu_set_tool_table_location(smu);
+
if (!smu_is_dpm_running(smu))
pr_info("dpm has been disabled\n");
@@ -1376,9 +1372,6 @@ static int smu_hw_init(void *handle)
static int smu_stop_dpms(struct smu_context *smu) {
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
return smu_system_features_control(smu, false); }
@@ -1403,35 +1396,35 @@ static int smu_hw_fini(void *handle)
adev->pm.dpm_enabled = false;
-if (!amdgpu_sriov_vf(adev)){
+if (!amdgpu_sriov_vf(adev)) {
smu_i2c_eeprom_fini(smu, &adev->pm.smu_i2c);
+}
+
+ret = smu_stop_thermal_control(smu);
+if (ret) {
+pr_warn("Fail to stop thermal control!\n");
+return ret;
+}
-ret = smu_stop_thermal_control(smu);
+/*
+ * For custom pptable uploading, skip the DPM features
+ * disable process on Navi1x ASICs.
+ * - As the gfx related features are under control of
+ * RLC on those ASICs. RLC reinitialization will be
+ * needed to reenable them. That will cost much more
+ * efforts.
+ *
+ * - SMU firmware can handle the DPM reenablement
+ * properly.
+ */
+if (!smu->uploading_custom_pp_table ||
+!((adev->asic_type >= CHIP_NAVI10) &&
+(adev->asic_type <= CHIP_NAVI12))) {
+ret = smu_stop_dpms(smu);
if (ret) {
-pr_warn("Fail to stop thermal control!\n");
+pr_warn("Fail to stop Dpms!\n");
return ret;
}
-
-/*
- * For custom pptable uploading, skip the DPM features
- * disable process on Navi1x ASICs.
- * - As the gfx related features are under control of
- * RLC on those ASICs. RLC reinitialization will be
- * needed to reenable them. That will cost much more
- * efforts.
- *
- * - SMU firmware can handle the DPM reenablement
- * properly.
- */
-if (!smu->uploading_custom_pp_table ||
-!((adev->asic_type >= CHIP_NAVI10) &&
-(adev->asic_type <= CHIP_NAVI12))) {
-ret = smu_stop_dpms(smu);
-if (ret) {
-pr_warn("Fail to stop Dpms!\n");
-return ret;
-}
-}
}
kfree(table_context->driver_pptable);
@@ -1548,12 +1541,12 @@ static int smu_suspend(void *handle)
if (!amdgpu_sriov_vf(adev)) {
smu_i2c_eeprom_fini(smu, &adev->pm.smu_i2c);
-
-ret = smu_disable_dpm(smu);
-if (ret)
-return ret;
}
+ret = smu_disable_dpm(smu);
+if (ret)
+return ret;
+
smu->watermarks_bitmap &= ~(WATERMARKS_LOADED);
if (adev->asic_type >= CHIP_NAVI10 &&
diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index dcbb273674d1..70cc1c12f196 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -1369,7 +1369,7 @@ static int arcturus_get_power_profile_mode(struct smu_context *smu,
if (result)
return result;
-if (smu_version >= 0x360d00 && !amdgpu_sriov_vf(adev))
+if (smu_version >= 0x360d00)
size += sprintf(buf + size, "%16s %s %s %s %s %s %s %s %s %s %s\n",
title[0], title[1], title[2], title[3], title[4], title[5],
title[6], title[7], title[8], title[9], title[10]); @@ -1386,7 +1386,7 @@ static int arcturus_get_power_profile_mode(struct smu_context *smu,
if (workload_type < 0)
continue;
-if (smu_version >= 0x360d00 && !amdgpu_sriov_vf(adev)) {
+if (smu_version >= 0x360d00) {
result = smu_update_table(smu,
SMU_TABLE_ACTIVITY_MONITOR_COEFF,
workload_type,
@@ -1401,7 +1401,7 @@ static int arcturus_get_power_profile_mode(struct smu_context *smu,
size += sprintf(buf + size, "%2d %14s%s\n",
i, profile_name[i], (i == smu->power_profile_mode) ? "*" : " ");
-if (smu_version >= 0x360d00 && !amdgpu_sriov_vf(adev)) {
+if (smu_version >= 0x360d00) {
size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n",
" ",
0,
diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
index 5f7373e86d90..ef4952afb365 100644
--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -1818,8 +1818,7 @@ static int navi10_get_power_limit(struct smu_context *smu,
int power_src;
if (!smu->power_limit) {
-if (smu_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT) &&
-!amdgpu_sriov_vf(smu->adev)) {
+if (smu_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT)) {
power_src = smu_power_get_index(smu, SMU_POWER_SOURCE_AC);
if (power_src < 0)
return -EINVAL;
@@ -1962,9 +1961,6 @@ static int navi10_set_default_od_settings(struct smu_context *smu, bool initiali
OverDriveTable_t *od_table, *boot_od_table;
int ret = 0;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
ret = smu_v11_0_set_default_od_settings(smu, initialize, sizeof(OverDriveTable_t));
if (ret)
return ret;
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index 906bc7f2e686..3af439a77876 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -768,9 +768,6 @@ int smu_v11_0_set_deep_sleep_dcefclk(struct smu_context *smu, uint32_t clk) {
int ret;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
ret = smu_send_smc_msg_with_param(smu,
SMU_MSG_SetMinDeepSleepDcefclk, clk, NULL);
if (ret)
@@ -814,9 +811,6 @@ int smu_v11_0_set_tool_table_location(struct smu_context *smu)
int ret = 0;
struct smu_table *tool_table = &smu->smu_table.tables[SMU_TABLE_PMSTATUSLOG];
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
if (tool_table->mc_address) {
ret = smu_send_smc_msg_with_param(smu,
SMU_MSG_SetToolsDramAddrHigh,
@@ -836,9 +830,6 @@ int smu_v11_0_init_display_count(struct smu_context *smu, uint32_t count) {
int ret = 0;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
if (!smu->pm_enabled)
return ret;
@@ -853,9 +844,6 @@ int smu_v11_0_set_allowed_mask(struct smu_context *smu)
int ret = 0;
uint32_t feature_mask[2];
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
mutex_lock(&feature->mutex);
if (bitmap_empty(feature->allowed, SMU_FEATURE_MAX) || feature->feature_num < 64)
goto failed;
@@ -884,9 +872,6 @@ int smu_v11_0_get_enabled_mask(struct smu_context *smu,
struct smu_feature *feature = &smu->smu_feature;
int ret = 0;
-if (amdgpu_sriov_vf(smu->adev) && !amdgpu_sriov_is_pp_one_vf(smu->adev))
-return 0;
-
if (!feature_mask || num < 2)
return -EINVAL;
@@ -942,9 +927,6 @@ int smu_v11_0_notify_display_change(struct smu_context *smu) {
int ret = 0;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
if (!smu->pm_enabled)
return ret;
@@ -1107,9 +1089,6 @@ int smu_v11_0_set_power_limit(struct smu_context *smu, uint32_t n)
int ret = 0;
uint32_t max_power_limit;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
max_power_limit = smu_v11_0_get_max_power_limit(smu);
if (n > max_power_limit) {
@@ -1860,9 +1839,6 @@ int smu_v11_0_override_pcie_parameters(struct smu_context *smu)
uint32_t pcie_gen = 0, pcie_width = 0;
int ret;
-if (amdgpu_sriov_vf(smu->adev))
-return 0;
-
if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
pcie_gen = 3;
else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx at lists.freedesktop.org
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Cevan.quan%40amd.com%7C1cec0ad4526347481e9708d8015c67be%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637260843725484475&sdata=EXruuZmiUCQdu824UO8eLcg1WEbJVwghYChj2lAK%2FqI%3D&reserved=0
More information about the amd-gfx
mailing list