[PATCH] drm/amdgpu/display: FP fixes for DCN3.x (v2)
Alex Deucher
alexdeucher at gmail.com
Tue Nov 3 17:39:44 UTC 2020
Add proper FP_START/END handling and adjust Makefiles per
previous asics.
v2: fix up harder.
Reviewed-by: Harry Wentland <harry.wentland at amd.com> (v1)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
.../gpu/drm/amd/display/dc/clk_mgr/Makefile | 13 ++++
.../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 4 +-
.../drm/amd/display/dc/dcn30/dcn30_resource.c | 71 +++++++++++++++++--
drivers/gpu/drm/amd/display/dc/dml/Makefile | 8 ++-
4 files changed, 89 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile b/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
index facc8b970300..9f9137562cab 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
@@ -127,6 +127,19 @@ AMD_DISPLAY_FILES += $(AMD_DAL_CLK_MGR_DCN30)
###############################################################################
CLK_MGR_DCN301 = vg_clk_mgr.o dcn301_smu.o
+# prevent build errors regarding soft-float vs hard-float FP ABI tags
+# this code is currently unused on ppc64, as it applies to VanGogh APUs only
+ifdef CONFIG_PPC64
+CFLAGS_$(AMDDALPATH)/dc/clk_mgr/dcn301/vg_clk_mgr.o := $(call cc-option,-mno-gnu-attribute)
+endif
+
+# prevent build errors:
+# ...: '-mgeneral-regs-only' is incompatible with the use of floating-point types
+# this file is unused on arm64, just like on ppc64
+ifdef CONFIG_ARM64
+CFLAGS_REMOVE_$(AMDDALPATH)/dc/clk_mgr/dcn301/vg_clk_mgr.o := -mgeneral-regs-only
+endif
+
AMD_DAL_CLK_MGR_DCN301 = $(addprefix $(AMDDALPATH)/dc/clk_mgr/dcn301/,$(CLK_MGR_DCN301))
AMD_DISPLAY_FILES += $(AMD_DAL_CLK_MGR_DCN301)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
index 7bad73b2d146..82cb688ba5e0 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
@@ -104,7 +104,7 @@ static void dcn3_init_single_clock(struct clk_mgr_internal *clk_mgr, PPCLK_e clk
}
}
-static void dcn3_build_wm_range_table(struct clk_mgr_internal *clk_mgr)
+static noinline void dcn3_build_wm_range_table(struct clk_mgr_internal *clk_mgr)
{
/* defaults */
double pstate_latency_us = clk_mgr->base.ctx->dc->dml.soc.dram_clock_change_latency_us;
@@ -211,7 +211,9 @@ void dcn3_init_clocks(struct clk_mgr *clk_mgr_base)
clk_mgr_base->funcs->get_memclk_states_from_smu(clk_mgr_base);
/* WM range table */
+ DC_FP_START();
dcn3_build_wm_range_table(clk_mgr);
+ DC_FP_END();
}
static int dcn30_get_vco_frequency_from_reg(struct clk_mgr_internal *clk_mgr)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
index d65496917e93..01ac8b2921c6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -1469,7 +1469,19 @@ int dcn30_populate_dml_pipes_from_context(
return pipe_cnt;
}
-void dcn30_populate_dml_writeback_from_context(
+/*
+ * This must be noinline to ensure anything that deals with FP registers
+ * is contained within this call; previously our compiling with hard-float
+ * would result in fp instructions being emitted outside of the boundaries
+ * of the DC_FP_START/END macros, which makes sense as the compiler has no
+ * idea about what is wrapped and what is not
+ *
+ * This is largely just a workaround to avoid breakage introduced with 5.6,
+ * ideally all fp-using code should be moved into its own file, only that
+ * should be compiled with hard-float, and all code exported from there
+ * should be strictly wrapped with DC_FP_START/END
+ */
+static noinline void dcn30_populate_dml_writeback_from_context_fp(
struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes)
{
int pipe_cnt, i, j;
@@ -1558,6 +1570,14 @@ void dcn30_populate_dml_writeback_from_context(
}
+void dcn30_populate_dml_writeback_from_context(
+ struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes)
+{
+ DC_FP_START();
+ dcn30_populate_dml_writeback_from_context_fp(dc, res_ctx, pipes);
+ DC_FP_END();
+}
+
unsigned int dcn30_calc_max_scaled_time(
unsigned int time_per_pixel,
enum mmhubbub_wbif_mode mode,
@@ -2204,7 +2224,19 @@ static bool dcn30_internal_validate_bw(
return out;
}
-void dcn30_calculate_wm_and_dlg(
+/*
+ * This must be noinline to ensure anything that deals with FP registers
+ * is contained within this call; previously our compiling with hard-float
+ * would result in fp instructions being emitted outside of the boundaries
+ * of the DC_FP_START/END macros, which makes sense as the compiler has no
+ * idea about what is wrapped and what is not
+ *
+ * This is largely just a workaround to avoid breakage introduced with 5.6,
+ * ideally all fp-using code should be moved into its own file, only that
+ * should be compiled with hard-float, and all code exported from there
+ * should be strictly wrapped with DC_FP_START/END
+ */
+static noinline void dcn30_calculate_wm_and_dlg_fp(
struct dc *dc, struct dc_state *context,
display_e2e_pipe_params_st *pipes,
int pipe_cnt,
@@ -2360,7 +2392,18 @@ void dcn30_calculate_wm_and_dlg(
dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
}
-bool dcn30_validate_bandwidth(struct dc *dc,
+void dcn30_calculate_wm_and_dlg(
+ struct dc *dc, struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ int pipe_cnt,
+ int vlevel)
+{
+ DC_FP_START();
+ dcn30_calculate_wm_and_dlg_fp(dc, context, pipes, pipe_cnt, vlevel);
+ DC_FP_END();
+}
+
+static noinline bool dcn30_validate_bandwidth_fp(struct dc *dc,
struct dc_state *context,
bool fast_validate)
{
@@ -2411,7 +2454,20 @@ bool dcn30_validate_bandwidth(struct dc *dc,
return out;
}
-static void get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
+bool dcn30_validate_bandwidth(struct dc *dc,
+ struct dc_state *context,
+ bool fast_validate)
+{
+ bool out;
+
+ DC_FP_START();
+ out = dcn30_validate_bandwidth_fp(dc, context, fast_validate);
+ DC_FP_END();
+
+ return out;
+}
+
+static noinline void get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
unsigned int *optimal_dcfclk,
unsigned int *optimal_fclk)
{
@@ -2478,8 +2534,10 @@ void dcn30_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params
// Calculate optimal dcfclk for each uclk
for (i = 0; i < num_uclk_states; i++) {
+ DC_FP_START();
get_optimal_dcfclk_fclk_for_uclk(bw_params->clk_table.entries[i].memclk_mhz * 16,
&optimal_dcfclk_for_uclk[i], NULL);
+ DC_FP_END();
if (optimal_dcfclk_for_uclk[i] < bw_params->clk_table.entries[0].dcfclk_mhz) {
optimal_dcfclk_for_uclk[i] = bw_params->clk_table.entries[0].dcfclk_mhz;
}
@@ -2583,6 +2641,8 @@ static bool dcn30_resource_construct(
struct irq_service_init_data init_data;
struct ddc_service_init_data ddc_init_data;
+ DC_FP_START();
+
ctx->dc_bios->regs = &bios_regs;
pool->base.res_cap = &res_cap_dcn3;
@@ -2860,10 +2920,13 @@ static bool dcn30_resource_construct(
pool->base.oem_device = NULL;
}
+ DC_FP_END();
+
return true;
create_fail:
+ DC_FP_END();
dcn30_resource_destruct(pool);
return false;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/Makefile b/drivers/gpu/drm/amd/display/dc/dml/Makefile
index 879a930358a5..a02a33dcd70b 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/dml/Makefile
@@ -64,6 +64,9 @@ CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20v2.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_rq_dlg_calc_20v2.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn21/display_mode_vba_21.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn21/display_rq_dlg_calc_21.o := $(dml_ccflags)
+CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_mode_vba_30.o := $(dml_ccflags) -Wframe-larger-than=2048
+CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_rq_dlg_calc_30.o := $(dml_ccflags)
+CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_lib.o := $(dml_ccflags)
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/display_mode_vba.o := $(dml_rcflags)
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20.o := $(dml_rcflags)
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn20/display_rq_dlg_calc_20.o := $(dml_rcflags)
@@ -71,8 +74,9 @@ CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20v2.o := $(dml_rcflag
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn20/display_rq_dlg_calc_20v2.o := $(dml_rcflags)
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn21/display_mode_vba_21.o := $(dml_rcflags)
CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn21/display_rq_dlg_calc_21.o := $(dml_rcflags)
-CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_mode_vba_30.o := $(dml_ccflags) -Wframe-larger-than=2048
-CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_rq_dlg_calc_30.o := $(dml_ccflags)
+CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn30/display_mode_vba_30.o := $(dml_rcflags)
+CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/dcn30/display_rq_dlg_calc_30.o := $(dml_rcflags)
+CFLAGS_REMOVE_$(AMDDALPATH)/dc/dml/display_mode_lib.o := $(dml_rcflags)
endif
CFLAGS_$(AMDDALPATH)/dc/dml/dml1_display_rq_dlg_calc.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/display_rq_dlg_helpers.o := $(dml_ccflags)
--
2.25.4
More information about the amd-gfx
mailing list