[PATCH 15/42] drm/amd/display: Power eDP panel back ON before link training retry
Aurabindo Pillai
aurabindo.pillai at amd.com
Thu Sep 10 13:46:56 UTC 2020
From: Ashley Thomas <Ashley.Thomas2 at amd.com>
[why]
When link training failures occur for eDP, dp_disable_link_phy
is called which powers OFF eDP panel. After link training retry
delay, the next retry begins by calling dp_enable_link_phy
which does not issue a correspnding eDP panel power ON, leaving
panel powered OFF which leads to display OFF/dark.
[how]
Power ON eDP before next link training retry.
Signed-off-by: Ashley Thomas <Ashley.Thomas2 at amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
---
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 6 ++
.../drm/amd/display/dc/core/dc_link_hwss.c | 6 ++
.../display/dc/dce110/dce110_hw_sequencer.c | 84 ++++++++++++++-----
3 files changed, 74 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index e4b3b71dad03..47fb09f41bfb 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1619,6 +1619,9 @@ bool perform_link_training_with_retries(
for (j = 0; j < attempts; ++j) {
+ DC_LOG_HW_LINK_TRAINING("%s: Beginning link training attempt %u of %d\n",
+ __func__, (unsigned int)j + 1, attempts);
+
dp_enable_link_phy(
link,
signal,
@@ -1647,6 +1650,9 @@ bool perform_link_training_with_retries(
if (j == (attempts - 1))
break;
+ DC_LOG_WARNING("%s: Link training attempt %u of %d failed\n",
+ __func__, (unsigned int)j + 1, attempts);
+
dp_disable_link_phy(link, signal);
msleep(delay_between_attempts);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index dd88eb348dfa..81c026319ccd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -104,6 +104,12 @@ void dp_enable_link_phy(
struct clock_source *dp_cs =
link->dc->res_pool->dp_clock_source;
unsigned int i;
+
+ if (link->connector_signal == SIGNAL_TYPE_EDP) {
+ link->dc->hwss.edp_power_control(link, true);
+ link->dc->hwss.edp_wait_for_hpd_ready(link, true);
+ }
+
/* If the current pixel clock source is not DTO(happens after
* switching from HDMI passive dongle to DP on the same connector),
* switch the pixel clock source to DTO.
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 0603ddca7bd0..1002ce9979dc 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -810,37 +810,66 @@ void dce110_edp_power_control(
if (power_up !=
link->panel_cntl->funcs->is_panel_powered_on(link->panel_cntl)) {
+
+ unsigned long long current_ts = dm_get_timestamp(ctx);
+ unsigned long long time_since_edp_poweroff_ms =
+ div64_u64(dm_get_elapse_time_in_ns(
+ ctx,
+ current_ts,
+ link->link_trace.time_stamp.edp_poweroff), 1000000);
+ unsigned long long time_since_edp_poweron_ms =
+ div64_u64(dm_get_elapse_time_in_ns(
+ ctx,
+ current_ts,
+ link->link_trace.time_stamp.edp_poweron), 1000000);
+ DC_LOG_HW_RESUME_S3(
+ "%s: transition: power_up=%d current_ts=%llu edp_poweroff=%llu edp_poweron=%llu time_since_edp_poweroff_ms=%llu time_since_edp_poweron_ms=%llu",
+ __func__,
+ power_up,
+ current_ts,
+ link->link_trace.time_stamp.edp_poweroff,
+ link->link_trace.time_stamp.edp_poweron,
+ time_since_edp_poweroff_ms,
+ time_since_edp_poweron_ms);
+
/* Send VBIOS command to prompt eDP panel power */
if (power_up) {
- unsigned long long current_ts = dm_get_timestamp(ctx);
- unsigned long long duration_in_ms =
- div64_u64(dm_get_elapse_time_in_ns(
- ctx,
- current_ts,
- link->link_trace.time_stamp.edp_poweroff), 1000000);
- unsigned long long wait_time_ms = 0;
-
- /* max 500ms from LCDVDD off to on */
- unsigned long long edp_poweroff_time_ms = 500;
+ /* edp requires a min of 500ms from LCDVDD off to on */
+ unsigned long long remaining_min_edp_poweroff_time_ms = 500;
+ /* add time defined by a patch, if any (usually patch extra_t12_ms is 0) */
if (link->local_sink != NULL)
- edp_poweroff_time_ms =
- 500 + link->local_sink->edid_caps.panel_patch.extra_t12_ms;
- if (link->link_trace.time_stamp.edp_poweroff == 0)
- wait_time_ms = edp_poweroff_time_ms;
- else if (duration_in_ms < edp_poweroff_time_ms)
- wait_time_ms = edp_poweroff_time_ms - duration_in_ms;
-
- if (wait_time_ms) {
- msleep(wait_time_ms);
- dm_output_to_console("%s: wait %lld ms to power on eDP.\n",
- __func__, wait_time_ms);
+ remaining_min_edp_poweroff_time_ms +=
+ link->local_sink->edid_caps.panel_patch.extra_t12_ms;
+
+ /* Adjust remaining_min_edp_poweroff_time_ms if this is not the first time. */
+ if (link->link_trace.time_stamp.edp_poweroff != 0) {
+ if (time_since_edp_poweroff_ms < remaining_min_edp_poweroff_time_ms)
+ remaining_min_edp_poweroff_time_ms =
+ remaining_min_edp_poweroff_time_ms - time_since_edp_poweroff_ms;
+ else
+ remaining_min_edp_poweroff_time_ms = 0;
}
+ if (remaining_min_edp_poweroff_time_ms) {
+ DC_LOG_HW_RESUME_S3(
+ "%s: remaining_min_edp_poweroff_time_ms=%llu: begin wait.\n",
+ __func__, remaining_min_edp_poweroff_time_ms);
+ msleep(remaining_min_edp_poweroff_time_ms);
+ DC_LOG_HW_RESUME_S3(
+ "%s: remaining_min_edp_poweroff_time_ms=%llu: end wait.\n",
+ __func__, remaining_min_edp_poweroff_time_ms);
+ dm_output_to_console("%s: wait %lld ms to power on eDP.\n",
+ __func__, remaining_min_edp_poweroff_time_ms);
+ } else {
+ DC_LOG_HW_RESUME_S3(
+ "%s: remaining_min_edp_poweroff_time_ms=%llu: no wait required.\n",
+ __func__, remaining_min_edp_poweroff_time_ms);
+ }
}
DC_LOG_HW_RESUME_S3(
- "%s: Panel Power action: %s\n",
+ "%s: BEGIN: Panel Power action: %s\n",
__func__, (power_up ? "On":"Off"));
cntl.action = power_up ?
@@ -864,12 +893,23 @@ void dce110_edp_power_control(
bp_result = link_transmitter_control(ctx->dc_bios, &cntl);
+ DC_LOG_HW_RESUME_S3(
+ "%s: END: Panel Power action: %s bp_result=%u\n",
+ __func__, (power_up ? "On":"Off"),
+ bp_result);
+
if (!power_up)
/*save driver power off time stamp*/
link->link_trace.time_stamp.edp_poweroff = dm_get_timestamp(ctx);
else
link->link_trace.time_stamp.edp_poweron = dm_get_timestamp(ctx);
+ DC_LOG_HW_RESUME_S3(
+ "%s: updated values: edp_poweroff=%llu edp_poweron=%llu\n",
+ __func__,
+ link->link_trace.time_stamp.edp_poweroff,
+ link->link_trace.time_stamp.edp_poweron);
+
if (bp_result != BP_RESULT_OK)
DC_LOG_ERROR(
"%s: Panel Power bp_result: %d\n",
--
2.25.1
More information about the amd-gfx
mailing list