[PATCH] drm/amd/pm: setup APU dpm clock table in SMU HW initialization

[Evan Quan]

As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.

Change-Id: I2bb1f9ba26f9c8820c08241da62f7be64ab75840
Signed-off-by: Evan Quan <evan.quan at amd.com>
Reported-by: Dirk Gouders <dirk at gouders.net>
---
 drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index f46cf9ea355e..8f6045def272 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -482,17 +482,6 @@ static int smu_late_init(void *handle)
 		return ret;
 	}
 
-	/*
-	 * Set initialized values (get from vbios) to dpm tables context such as
-	 * gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each
-	 * type of clks.
-	 */
-	ret = smu_set_default_dpm_table(smu);
-	if (ret) {
-		dev_err(adev->dev, "Failed to setup default dpm clock tables!\n");
-		return ret;
-	}
-
 	ret = smu_populate_umd_state_clk(smu);
 	if (ret) {
 		dev_err(adev->dev, "Failed to populate UMD state clocks!\n");
@@ -1021,6 +1010,17 @@ static int smu_smc_hw_setup(struct smu_context *smu)
 		return ret;
 	}
 
+	/*
+	 * Set initialized values (get from vbios) to dpm tables context such as
+	 * gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each
+	 * type of clks.
+	 */
+	ret = smu_set_default_dpm_table(smu);
+	if (ret) {
+		dev_err(adev->dev, "Failed to setup default dpm clock tables!\n");
+		return ret;
+	}
+
 	ret = smu_notify_display_change(smu);
 	if (ret)
 		return ret;
-- 
2.28.0