[PATCH 0/4] Refine GPU recovery sequence to enhance its stability
Christian König
christian.koenig at amd.com
Tue Apr 6 10:34:08 UTC 2021
Hi Andrey,
well good question. My job is to watch over the implementation and
design and while I always help I can adjust anybodies schedule.
Is the patch to print a warning when the hardware is accessed without
holding the locks merged yet? If not then that would probably be a good
starting point.
Then we would need to unify this with the SRCU to make sure that we have
both the reset lock as well as block the hotplug code from reusing the
MMIO space.
And then testing, testing, testing to see if we have missed something.
Christian.
Am 05.04.21 um 19:58 schrieb Andrey Grodzovsky:
>
> Denis, Christian, are there any updates in the plan on how to move on
> with this ? As you know I need very similar code for my up-streaming
> of device hot-unplug. My latest solution
> (https://lists.freedesktop.org/archives/amd-gfx/2021-January/058606.html)
> was not acceptable because of low level guards on the register
> accessors level which was hurting performance. Basically I need a way
> to prevent any MMIO write accesses from kernel driver after device is
> removed (UMD accesses are taken care of by page faulting dummy page).
> We are using now hot-unplug code for Freemont program and so
> up-streaming became more of a priority then before. This MMIO access
> issue is currently my main blocker from up-streaming. Is there any way
> I can assist in pushing this on ?
>
> Andrey
>
> On 2021-03-18 5:51 a.m., Christian König wrote:
>> Am 18.03.21 um 10:30 schrieb Li, Dennis:
>>>
>>> >>> The GPU reset doesn't complete the fences we wait for. It only
>>> completes the hardware fences as part of the reset.
>>>
>>> >>> So waiting for a fence while holding the reset lock is illegal
>>> and needs to be avoided.
>>>
>>> I understood your concern. It is more complex for DRM GFX, therefore
>>> I abandon adding lock protection for DRM ioctls now. Maybe we can
>>> try to add all kernel dma_fence waiting in a list, and signal all
>>> in recovery threads. Do you have same concern for compute cases?
>>>
>>
>> Yes, compute (KFD) is even harder to handle.
>>
>> See you can't signal the dma_fence waiting. Waiting for a dma_fence
>> also means you wait for the GPU reset to finish.
>>
>> When we would signal the dma_fence during the GPU reset then we would
>> run into memory corruption because the hardware jobs running after
>> the GPU reset would access memory which is already freed.
>>
>>> >>> Lockdep also complains about this when it is used correctly. The
>>> only reason it doesn't complain here is because you use an
>>> atomic+wait_event instead of a locking primitive.
>>>
>>> Agree. This approach will escape the monitor of lockdep. Its goal
>>> is to block other threads when GPU recovery thread start. But I
>>> couldn’t find a better method to solve this problem. Do you have
>>> some suggestion?
>>>
>>
>> Well, completely abandon those change here.
>>
>> What we need to do is to identify where hardware access happens and
>> then insert taking the read side of the GPU reset lock so that we
>> don't wait for a dma_fence or allocate memory, but still protect the
>> hardware from concurrent access and reset.
>>
>> Regards,
>> Christian.
>>
>>> Best Regards
>>>
>>> Dennis Li
>>>
>>> *From:* Koenig, Christian <Christian.Koenig at amd.com>
>>> *Sent:* Thursday, March 18, 2021 4:59 PM
>>> *To:* Li, Dennis <Dennis.Li at amd.com>; amd-gfx at lists.freedesktop.org;
>>> Deucher, Alexander <Alexander.Deucher at amd.com>; Kuehling, Felix
>>> <Felix.Kuehling at amd.com>; Zhang, Hawking <Hawking.Zhang at amd.com>
>>> *Subject:* AW: [PATCH 0/4] Refine GPU recovery sequence to enhance
>>> its stability
>>>
>>> Exactly that's what you don't seem to understand.
>>>
>>> The GPU reset doesn't complete the fences we wait for. It only
>>> completes the hardware fences as part of the reset.
>>>
>>> So waiting for a fence while holding the reset lock is illegal and
>>> needs to be avoided.
>>>
>>> Lockdep also complains about this when it is used correctly. The
>>> only reason it doesn't complain here is because you use an
>>> atomic+wait_event instead of a locking primitive.
>>>
>>> Regards,
>>>
>>> Christian.
>>>
>>> ------------------------------------------------------------------------
>>>
>>> *Von:*Li, Dennis <Dennis.Li at amd.com <mailto:Dennis.Li at amd.com>>
>>> *Gesendet:* Donnerstag, 18. März 2021 09:28
>>> *An:* Koenig, Christian <Christian.Koenig at amd.com
>>> <mailto:Christian.Koenig at amd.com>>; amd-gfx at lists.freedesktop.org
>>> <mailto:amd-gfx at lists.freedesktop.org>
>>> <amd-gfx at lists.freedesktop.org
>>> <mailto:amd-gfx at lists.freedesktop.org>>; Deucher, Alexander
>>> <Alexander.Deucher at amd.com <mailto:Alexander.Deucher at amd.com>>;
>>> Kuehling, Felix <Felix.Kuehling at amd.com
>>> <mailto:Felix.Kuehling at amd.com>>; Zhang, Hawking
>>> <Hawking.Zhang at amd.com <mailto:Hawking.Zhang at amd.com>>
>>> *Betreff:* RE: [PATCH 0/4] Refine GPU recovery sequence to enhance
>>> its stability
>>>
>>> >>> Those two steps need to be exchanged or otherwise it is possible
>>> that new delayed work items etc are started before the lock is taken.
>>> What about adding check for adev->in_gpu_reset in work item? If
>>> exchange the two steps, it maybe introduce the deadlock. For
>>> example, the user thread hold the read lock and waiting for the
>>> fence, if recovery thread try to hold write lock and then complete
>>> fences, in this case, recovery thread will always be blocked.
>>>
>>>
>>> Best Regards
>>> Dennis Li
>>> -----Original Message-----
>>> From: Koenig, Christian <Christian.Koenig at amd.com
>>> <mailto:Christian.Koenig at amd.com>>
>>> Sent: Thursday, March 18, 2021 3:54 PM
>>> To: Li, Dennis <Dennis.Li at amd.com <mailto:Dennis.Li at amd.com>>;
>>> amd-gfx at lists.freedesktop.org
>>> <mailto:amd-gfx at lists.freedesktop.org>; Deucher, Alexander
>>> <Alexander.Deucher at amd.com <mailto:Alexander.Deucher at amd.com>>;
>>> Kuehling, Felix <Felix.Kuehling at amd.com
>>> <mailto:Felix.Kuehling at amd.com>>; Zhang, Hawking
>>> <Hawking.Zhang at amd.com <mailto:Hawking.Zhang at amd.com>>
>>> Subject: Re: [PATCH 0/4] Refine GPU recovery sequence to enhance its
>>> stability
>>>
>>> Am 18.03.21 um 08:23 schrieb Dennis Li:
>>> > We have defined two variables in_gpu_reset and reset_sem in adev
>>> object. The atomic type variable in_gpu_reset is used to avoid
>>> recovery thread reenter and make lower functions return more earlier
>>> when recovery start, but couldn't block recovery thread when it
>>> access hardware. The r/w semaphore reset_sem is used to solve these
>>> synchronization issues between recovery thread and other threads.
>>> >
>>> > The original solution locked registers' access in lower functions,
>>> which will introduce following issues:
>>> >
>>> > 1) many lower functions are used in both recovery thread and
>>> others. Firstly we must harvest these functions, it is easy to miss
>>> someones. Secondly these functions need select which lock (read lock
>>> or write lock) will be used, according to the thread it is running
>>> in. If the thread context isn't considered, the added lock will
>>> easily introduce deadlock. Besides that, in most time, developer
>>> easily forget to add locks for new functions.
>>> >
>>> > 2) performance drop. More lower functions are more frequently called.
>>> >
>>> > 3) easily introduce false positive lockdep complaint, because
>>> write lock has big range in recovery thread, but low level functions
>>> will hold read lock may be protected by other locks in other threads.
>>> >
>>> > Therefore the new solution will try to add lock protection for
>>> ioctls of kfd. Its goal is that there are no threads except for
>>> recovery thread or its children (for xgmi) to access hardware when
>>> doing GPU reset and resume. So refine recovery thread as the following:
>>> >
>>> > Step 0: atomic_cmpxchg(&adev->in_gpu_reset, 0, 1)
>>> > 1). if failed, it means system had a recovery thread running,
>>> current thread exit directly;
>>> > 2). if success, enter recovery thread;
>>> >
>>> > Step 1: cancel all delay works, stop drm schedule, complete all
>>> unreceived fences and so on. It try to stop or pause other threads.
>>> >
>>> > Step 2: call down_write(&adev->reset_sem) to hold write lock,
>>> which will block recovery thread until other threads release read locks.
>>>
>>> Those two steps need to be exchanged or otherwise it is possible
>>> that new delayed work items etc are started before the lock is taken.
>>>
>>> Just to make it clear until this is fixed the whole patch set is a NAK.
>>>
>>> Regards,
>>> Christian.
>>>
>>> >
>>> > Step 3: normally, there is only recovery threads running to access
>>> hardware, it is safe to do gpu reset now.
>>> >
>>> > Step 4: do post gpu reset, such as call all ips' resume functions;
>>> >
>>> > Step 5: atomic set adev->in_gpu_reset as 0, wake up other threads
>>> and release write lock. Recovery thread exit normally.
>>> >
>>> > Other threads call the amdgpu_read_lock to synchronize with
>>> recovery thread. If it finds that in_gpu_reset is 1, it should
>>> release read lock if it has holden one, and then blocks itself to
>>> wait for recovery finished event. If thread successfully hold read
>>> lock and in_gpu_reset is 0, it continues. It will exit normally or
>>> be stopped by recovery thread in step 1.
>>> >
>>> > Dennis Li (4):
>>> > drm/amdgpu: remove reset lock from low level functions
>>> > drm/amdgpu: refine the GPU recovery sequence
>>> > drm/amdgpu: instead of using down/up_read directly
>>> > drm/amdkfd: add reset lock protection for kfd entry functions
>>> >
>>> > drivers/gpu/drm/amd/amdgpu/amdgpu.h | 6 +
>>> > drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 14 +-
>>> > drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 173
>>> +++++++++++++-----
>>> > .../gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 8 -
>>> > drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 4 +-
>>> > drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 9 +-
>>> > drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c | 5 +-
>>> > drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c | 5 +-
>>> > drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 172
>>> ++++++++++++++++-
>>> > drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 3 +-
>>> > drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 +
>>> > .../amd/amdkfd/kfd_process_queue_manager.c | 17 ++
>>> > 12 files changed, 345 insertions(+), 75 deletions(-)
>>> >
>>>
>>
>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20210406/9e9d3e56/attachment-0001.htm>
More information about the amd-gfx
mailing list