[PATCH 4/5] drm/amd/pm: change return value in aldebaran_get_power_limit()

[Lazar, Lijo]

On 8/11/2021 2:03 PM, Kevin Wang wrote:
> 1. change return value to avoid smu driver probe fails when FEATURE_PPT is
> not enabled.
> 2. if FEATURE_PPT is not enabled, set power limit value to 0.
> 
> Signed-off-by: Kevin Wang <kevin1.wang at amd.com>
> ---
>   .../gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c    | 15 +++++++++++++--
>   1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
> index fd04391364ac..e00ac43515bb 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
> @@ -1194,8 +1194,19 @@ static int aldebaran_get_power_limit(struct smu_context *smu,
>   	uint32_t power_limit = 0;
>   	int ret;
>   
> -	if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT))
> -		return -EINVAL;
> +	if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT)) {
> +		if (current_power_limit)
> +			*current_power_limit = 0;
> +		if (default_power_limit)
> +			*default_power_limit = 0;
> +		if (max_power_limit)
> +			*max_power_limit = 0;
> +
> +		dev_err(smu->adev->dev,
> +			"the PPT feature is not enabled, set power limit to 0");
> +

Maybe downgrade to dev_warn as it is not an error from driver 
perspective, it only limits the information available.

Thanks,
Lijo

> +		return 0;
> +	}
>   
>   	/* Valid power data is available only from primary die.
>   	 * For secondary die show the value as 0.
>