[PATCH V2 6/7] drm/amd/pm: drop unnecessary manual mode check

[Lazar, Lijo]

On 8/12/2021 12:16 PM, Quan, Evan wrote:
> [AMD Official Use Only]
> 
> 
> 
>> -----Original Message-----
>> From: Lazar, Lijo <Lijo.Lazar at amd.com>
>> Sent: Thursday, August 12, 2021 2:16 PM
>> To: Quan, Evan <Evan.Quan at amd.com>; amd-gfx at lists.freedesktop.org
>> Cc: nils.wallmenius at gmail.com; Chen, Guchun <Guchun.Chen at amd.com>
>> Subject: Re: [PATCH V2 6/7] drm/amd/pm: drop unnecessary manual mode
>> check
>>
>>
>>
>> On 8/12/2021 9:31 AM, Evan Quan wrote:
>>> As the fan control was guarded under manual mode before fan speed
>>> RPM/PWM setting. Thus the extra check is totally redundant.
>>>
>>> Change-Id: Ia9d776141ec4aa39255accbf00d7e7ed81c8424d
>>> Signed-off-by: Evan Quan <evan.quan at amd.com>
>>> ---
>>>    drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c | 12 +-----------
>>>    1 file changed, 1 insertion(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
>>> b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
>>> index 9001952442ba..20ece0963f51 100644
>>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
>>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
>>> @@ -1208,9 +1208,6 @@ smu_v11_0_set_fan_speed_pwm(struct
>> smu_context
>>> *smu, uint32_t speed)
>>>
>>>    	speed = MIN(speed, 255);
>>>
>>> -	if (smu_v11_0_auto_fan_control(smu, 0))
>>> -		return -EINVAL;
>>> -
>>
>> There is a FAN_CONTROL_NONE mode where it is set to full speed. Is that
>> affected by this change?
> [Quan, Evan] This check was designed to block "auto" mode(like If it was under auto mode, these manual settings will be not permitted).
> The FAN_CONTROL_NONE mode is not affected with and without this check.
> 

To set FAN_CONTROL_NONE, basically also need to turn off auto mode and 
manually set to 100% speed. If we take out turning off auto mode here, 
probably that part needs to be handled elsewhere.

Thanks,
Lijo

> BR
> Evan
>>
>> Thanks,
>> Lijo
>>
>>>    	duty100 = REG_GET_FIELD(RREG32_SOC15(THM, 0,
>> mmCG_FDO_CTRL1),
>>>    				CG_FDO_CTRL1, FMAX_DUTY100);
>>>    	if (!duty100)
>>> @@ -1237,11 +1234,6 @@ int smu_v11_0_set_fan_speed_rpm(struct
>> smu_context *smu,
>>>    	 */
>>>    	uint32_t crystal_clock_freq = 2500;
>>>    	uint32_t tach_period;
>>> -	int ret;
>>> -
>>> -	ret = smu_v11_0_auto_fan_control(smu, 0);
>>> -	if (ret)
>>> -		return ret;
>>>
>>>    	/*
>>>    	 * To prevent from possible overheat, some ASICs may have
>>> requirement @@ -1257,9 +1249,7 @@ int
>> smu_v11_0_set_fan_speed_rpm(struct smu_context *smu,
>>>    				   CG_TACH_CTRL, TARGET_PERIOD,
>>>    				   tach_period));
>>>
>>> -	ret = smu_v11_0_set_fan_static_mode(smu,
>> FDO_PWM_MODE_STATIC_RPM);
>>> -
>>> -	return ret;
>>> +	return smu_v11_0_set_fan_static_mode(smu,
>> FDO_PWM_MODE_STATIC_RPM);
>>>    }
>>>
>>>    int smu_v11_0_get_fan_speed_pwm(struct smu_context *smu,
>>>