[PATCH 01/10] drm/amd/display: Set exit_optimized_pwr_state for DCN31

[Pavle Kotarac]

From: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>

[Why]
SMU now respects the PHY refclk disable request from driver.

This causes a hang during hotplug when PHY refclk was disabled
because it's not being re-enabled and the transmitter control
starts on dc_link_detect.

[How]
We normally would re-enable the clk with exit_optimized_pwr_state
but this is only set on DCN21 and DCN301. Set it for dcn31 as well.

This fixes DMCUB timeouts in the PHY.

Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ")

Reviewed-by: Eric Yang <Eric.Yang2 at amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac at amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
index e175b6cc0125..4e625094026b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
@@ -101,6 +101,7 @@ static const struct hw_sequencer_funcs dcn31_funcs = {
 	.z10_restore = dcn31_z10_restore,
 	.z10_save_init = dcn31_z10_save_init,
 	.set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
+	.exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state,
 	.update_visual_confirm_color = dcn20_update_visual_confirm_color,
 };
 
-- 
2.32.0