[PATCH 03/19] drm/amd/display: Refactor vendor specific link training sequence
Rodrigo Siqueira
Rodrigo.Siqueira at amd.com
Fri Dec 17 21:23:51 UTC 2021
From: "Shen, George" <George.Shen at amd.com>
[Why]
Current implementation is not scalable and retrofits the existing
standard link training code for purposes outside of its original design.
[How]
Refactor vendor specific link training sequence into its own separate
function to be called instead of the standard link training function.
Reviewed-by: Wenjing Liu <Wenjing.Liu at amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
Signed-off-by: George Shen <George.Shen at amd.com>
---
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 338 +++++++++++++++++-
1 file changed, 337 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 6f552f7ee1db..04878817e622 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2427,6 +2427,338 @@ static enum link_training_result dp_perform_128b_132b_link_training(
}
#endif
+static enum link_training_result dc_link_dp_perform_fixed_vs_pe_training_sequence(
+ struct dc_link *link,
+ struct link_training_settings *lt_settings)
+{
+ const uint8_t vendor_lttpr_write_data_reset[4] = {0x1, 0x50, 0x63, 0xFF};
+ const uint8_t offset = dp_convert_to_count(
+ link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
+ const uint8_t vendor_lttpr_write_data_intercept_en[4] = {0x1, 0x55, 0x63, 0x0};
+ const uint8_t vendor_lttpr_write_data_intercept_dis[4] = {0x1, 0x55, 0x63, 0x68};
+ uint8_t vendor_lttpr_write_data_vs[4] = {0x1, 0x51, 0x63, 0x0};
+ uint8_t vendor_lttpr_write_data_pe[4] = {0x1, 0x52, 0x63, 0x0};
+ uint32_t vendor_lttpr_write_address = 0xF004F;
+ enum link_training_result status = LINK_TRAINING_SUCCESS;
+ uint8_t lane = 0;
+ union down_spread_ctrl downspread = {0};
+ union lane_count_set lane_count_set = {0};
+ uint8_t toggle_rate;
+ uint8_t rate;
+
+ /* Only 8b/10b is supported */
+ ASSERT(dp_get_link_encoding_format(<_settings->link_settings) ==
+ DP_8b_10b_ENCODING);
+
+ if (offset != 0xFF) {
+ vendor_lttpr_write_address +=
+ ((DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE) * (offset - 1));
+ }
+
+ /* Vendor specific: Reset lane settings */
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_reset[0],
+ sizeof(vendor_lttpr_write_data_reset));
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_vs[0],
+ sizeof(vendor_lttpr_write_data_vs));
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_pe[0],
+ sizeof(vendor_lttpr_write_data_pe));
+
+ /* Vendor specific: Enable intercept */
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_intercept_en[0],
+ sizeof(vendor_lttpr_write_data_intercept_en));
+
+ /* 1. set link rate, lane count and spread. */
+
+ downspread.raw = (uint8_t)(lt_settings->link_settings.link_spread);
+
+ lane_count_set.bits.LANE_COUNT_SET =
+ lt_settings->link_settings.lane_count;
+
+ lane_count_set.bits.ENHANCED_FRAMING = lt_settings->enhanced_framing;
+ lane_count_set.bits.POST_LT_ADJ_REQ_GRANTED = 0;
+
+
+ if (lt_settings->pattern_for_eq < DP_TRAINING_PATTERN_SEQUENCE_4) {
+ lane_count_set.bits.POST_LT_ADJ_REQ_GRANTED =
+ link->dpcd_caps.max_ln_count.bits.POST_LT_ADJ_REQ_SUPPORTED;
+ }
+
+ core_link_write_dpcd(link, DP_DOWNSPREAD_CTRL,
+ &downspread.raw, sizeof(downspread));
+
+ core_link_write_dpcd(link, DP_LANE_COUNT_SET,
+ &lane_count_set.raw, 1);
+
+#if defined(CONFIG_DRM_AMD_DC_DCN)
+ rate = get_dpcd_link_rate(<_settings->link_settings);
+#else
+ rate = (uint8_t) (lt_settings->link_settings.link_rate);
+#endif
+
+ /* Vendor specific: Toggle link rate */
+ toggle_rate = (rate == 0x6) ? 0xA : 0x6;
+
+ if (link->vendor_specific_lttpr_link_rate_wa == rate) {
+ core_link_write_dpcd(
+ link,
+ DP_LINK_BW_SET,
+ &toggle_rate,
+ 1);
+ }
+
+ link->vendor_specific_lttpr_link_rate_wa = rate;
+
+ core_link_write_dpcd(link, DP_LINK_BW_SET, &rate, 1);
+
+ DC_LOG_HW_LINK_TRAINING("%s\n %x rate = %x\n %x lane = %x framing = %x\n %x spread = %x\n",
+ __func__,
+ DP_LINK_BW_SET,
+ lt_settings->link_settings.link_rate,
+ DP_LANE_COUNT_SET,
+ lt_settings->link_settings.lane_count,
+ lt_settings->enhanced_framing,
+ DP_DOWNSPREAD_CTRL,
+ lt_settings->link_settings.link_spread);
+
+ /* 2. Perform link training */
+
+ /* Perform Clock Recovery Sequence */
+ if (status == LINK_TRAINING_SUCCESS) {
+ uint32_t retries_cr;
+ uint32_t retry_count;
+ uint32_t wait_time_microsec;
+ enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
+ union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX];
+ union lane_align_status_updated dpcd_lane_status_updated;
+ union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
+
+ retries_cr = 0;
+ retry_count = 0;
+
+ while ((retries_cr < LINK_TRAINING_MAX_RETRY_COUNT) &&
+ (retry_count < LINK_TRAINING_MAX_CR_RETRY)) {
+
+ memset(&dpcd_lane_status, '\0', sizeof(dpcd_lane_status));
+ memset(&dpcd_lane_status_updated, '\0',
+ sizeof(dpcd_lane_status_updated));
+
+ /* 1. call HWSS to set lane settings */
+ dp_set_hw_lane_settings(
+ link,
+ lt_settings,
+ 0);
+
+ /* 2. update DPCD of the receiver */
+ if (!retry_count) {
+ /* EPR #361076 - write as a 5-byte burst,
+ * but only for the 1-st iteration.
+ */
+ dpcd_set_lt_pattern_and_lane_settings(
+ link,
+ lt_settings,
+ lt_settings->pattern_for_cr,
+ 0);
+ /* Vendor specific: Disable intercept */
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_intercept_dis[0],
+ sizeof(vendor_lttpr_write_data_intercept_dis));
+ } else {
+ vendor_lttpr_write_data_vs[3] = 0;
+ vendor_lttpr_write_data_pe[3] = 0;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ vendor_lttpr_write_data_vs[3] |=
+ lt_settings->dpcd_lane_settings[lane].bits.VOLTAGE_SWING_SET << (2 * lane);
+ vendor_lttpr_write_data_pe[3] |=
+ lt_settings->dpcd_lane_settings[lane].bits.PRE_EMPHASIS_SET << (2 * lane);
+ }
+
+ /* Vendor specific: Update VS and PE to DPRX requested value */
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_vs[0],
+ sizeof(vendor_lttpr_write_data_vs));
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_pe[0],
+ sizeof(vendor_lttpr_write_data_pe));
+
+ dpcd_set_lane_settings(
+ link,
+ lt_settings,
+ 0);
+ }
+
+ /* 3. wait receiver to lock-on*/
+ wait_time_microsec = lt_settings->cr_pattern_time;
+
+ dp_wait_for_training_aux_rd_interval(
+ link,
+ wait_time_microsec);
+
+ /* 4. Read lane status and requested drive
+ * settings as set by the sink
+ */
+ dp_get_lane_status_and_lane_adjust(
+ link,
+ lt_settings,
+ dpcd_lane_status,
+ &dpcd_lane_status_updated,
+ dpcd_lane_adjust,
+ 0);
+
+ /* 5. check CR done*/
+ if (dp_is_cr_done(lane_count, dpcd_lane_status)) {
+ status = LINK_TRAINING_SUCCESS;
+ break;
+ }
+
+ /* 6. max VS reached*/
+ if (dp_is_max_vs_reached(lt_settings))
+ break;
+
+ /* 7. same lane settings */
+ /* Note: settings are the same for all lanes,
+ * so comparing first lane is sufficient
+ */
+ if (lt_settings->dpcd_lane_settings[0].bits.VOLTAGE_SWING_SET ==
+ dpcd_lane_adjust[0].bits.VOLTAGE_SWING_LANE)
+ retries_cr++;
+ else
+ retries_cr = 0;
+
+ /* 8. update VS/PE/PC2 in lt_settings*/
+ dp_decide_lane_settings(lt_settings, dpcd_lane_adjust,
+ lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
+ retry_count++;
+ }
+
+ if (retry_count >= LINK_TRAINING_MAX_CR_RETRY) {
+ ASSERT(0);
+ DC_LOG_ERROR("%s: Link Training Error, could not get CR after %d tries. Possibly voltage swing issue",
+ __func__,
+ LINK_TRAINING_MAX_CR_RETRY);
+
+ }
+
+ status = dp_get_cr_failure(lane_count, dpcd_lane_status);
+ }
+
+ /* Perform Channel EQ Sequence */
+ if (status == LINK_TRAINING_SUCCESS) {
+ enum dc_dp_training_pattern tr_pattern;
+ uint32_t retries_ch_eq;
+ uint32_t wait_time_microsec;
+ enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
+ union lane_align_status_updated dpcd_lane_status_updated = {0};
+ union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
+ union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
+
+ /* Note: also check that TPS4 is a supported feature*/
+ tr_pattern = lt_settings->pattern_for_eq;
+
+ dp_set_hw_training_pattern(link, tr_pattern, 0);
+
+ status = LINK_TRAINING_EQ_FAIL_EQ;
+
+ for (retries_ch_eq = 0; retries_ch_eq <= LINK_TRAINING_MAX_RETRY_COUNT;
+ retries_ch_eq++) {
+
+ dp_set_hw_lane_settings(link, lt_settings, 0);
+
+ vendor_lttpr_write_data_vs[3] = 0;
+ vendor_lttpr_write_data_pe[3] = 0;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ vendor_lttpr_write_data_vs[3] |=
+ lt_settings->dpcd_lane_settings[lane].bits.VOLTAGE_SWING_SET << (2 * lane);
+ vendor_lttpr_write_data_pe[3] |=
+ lt_settings->dpcd_lane_settings[lane].bits.PRE_EMPHASIS_SET << (2 * lane);
+ }
+
+ /* Vendor specific: Update VS and PE to DPRX requested value */
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_vs[0],
+ sizeof(vendor_lttpr_write_data_vs));
+ core_link_write_dpcd(
+ link,
+ vendor_lttpr_write_address,
+ &vendor_lttpr_write_data_pe[0],
+ sizeof(vendor_lttpr_write_data_pe));
+
+ /* 2. update DPCD*/
+ if (!retries_ch_eq)
+ /* EPR #361076 - write as a 5-byte burst,
+ * but only for the 1-st iteration
+ */
+
+ dpcd_set_lt_pattern_and_lane_settings(
+ link,
+ lt_settings,
+ tr_pattern, 0);
+ else
+ dpcd_set_lane_settings(link, lt_settings, 0);
+
+ /* 3. wait for receiver to lock-on*/
+ wait_time_microsec = lt_settings->eq_pattern_time;
+
+ dp_wait_for_training_aux_rd_interval(
+ link,
+ wait_time_microsec);
+
+ /* 4. Read lane status and requested
+ * drive settings as set by the sink
+ */
+ dp_get_lane_status_and_lane_adjust(
+ link,
+ lt_settings,
+ dpcd_lane_status,
+ &dpcd_lane_status_updated,
+ dpcd_lane_adjust,
+ 0);
+
+ /* 5. check CR done*/
+ if (!dp_is_cr_done(lane_count, dpcd_lane_status)) {
+ status = LINK_TRAINING_EQ_FAIL_CR;
+ break;
+ }
+
+ /* 6. check CHEQ done*/
+ if (dp_is_ch_eq_done(lane_count, dpcd_lane_status) &&
+ dp_is_symbol_locked(lane_count, dpcd_lane_status) &&
+ dp_is_interlane_aligned(dpcd_lane_status_updated)) {
+ status = LINK_TRAINING_SUCCESS;
+ break;
+ }
+
+ /* 7. update VS/PE/PC2 in lt_settings*/
+ dp_decide_lane_settings(lt_settings, dpcd_lane_adjust,
+ lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
+ }
+ }
+
+ return status;
+}
+
+
enum link_training_result dc_link_dp_perform_link_training(
struct dc_link *link,
const struct dc_link_settings *link_settings,
@@ -2466,7 +2798,11 @@ enum link_training_result dc_link_dp_perform_link_training(
* Per DP specs starting from here, DPTX device shall not issue
* Non-LT AUX transactions inside training mode.
*/
- if (encoding == DP_8b_10b_ENCODING)
+ if (!link->dc->debug.apply_vendor_specific_lttpr_wa &&
+ (link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
+ link->lttpr_mode == LTTPR_MODE_TRANSPARENT)
+ status = dc_link_dp_perform_fixed_vs_pe_training_sequence(link, <_settings);
+ else if (encoding == DP_8b_10b_ENCODING)
status = dp_perform_8b_10b_link_training(link, <_settings);
#if defined(CONFIG_DRM_AMD_DC_DCN)
else if (encoding == DP_128b_132b_ENCODING)
--
2.25.1
More information about the amd-gfx
mailing list