[PATCH 3/6] drm/amd/display: Don't reinitialize DMCUB on s0ix resume

[Rodrigo Siqueira]

From: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>

[Why]
PSP will suspend and resume DMCUB. Driver should just wait for DMCUB to
finish the auto load before continuining instead of placing it into
reset, wiping its firmware state and reinitializing.

If we don't let DMCUB fully finish initializing for S0ix then some state
will be lost and screen corruption can occur due to incorrect address
translation.

[How]
Use dmub_srv callbacks to determine in DMCUB is running and wait for
auto-load to complete before continuining.

In S0ix DMCUB will be running and DAL fw so initialize will skip.

In S3 DMCUB will not be running and we will do a full hardware init.

In S3 DMCUB will be running but will not be DAL fw so we will also do
a full hardware init.

Reviewed-by: Mikita Lipski <Mikita.Lipski at amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 30 +++++++++++++++++--
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index bfeb84d2d1a0..2432b0c0be69 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1161,6 +1161,32 @@ static int dm_dmub_hw_init(struct amdgpu_device *adev)
 	return 0;
 }
 
+static void dm_dmub_hw_resume(struct amdgpu_device *adev)
+{
+	struct dmub_srv *dmub_srv = adev->dm.dmub_srv;
+	enum dmub_status status;
+	bool init;
+
+	if (!dmub_srv) {
+		/* DMUB isn't supported on the ASIC. */
+		return;
+	}
+
+	status = dmub_srv_is_hw_init(dmub_srv, &init);
+	if (status != DMUB_STATUS_OK)
+		DRM_WARN("DMUB hardware init check failed: %d\n", status);
+
+	if (status == DMUB_STATUS_OK && init) {
+		/* Wait for firmware load to finish. */
+		status = dmub_srv_wait_for_auto_load(dmub_srv, 100000);
+		if (status != DMUB_STATUS_OK)
+			DRM_WARN("Wait for DMUB auto-load failed: %d\n", status);
+	} else {
+		/* Perform the full hardware initialization. */
+		dm_dmub_hw_init(adev);
+	}
+}
+
 #if defined(CONFIG_DRM_AMD_DC_DCN)
 static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_addr_space_config *pa_config)
 {
@@ -2637,9 +2663,7 @@ static int dm_resume(void *handle)
 		amdgpu_dm_outbox_init(adev);
 
 	/* Before powering on DC we need to re-initialize DMUB. */
-	r = dm_dmub_hw_init(adev);
-	if (r)
-		DRM_ERROR("DMUB interface failed to initialize: status=%d\n", r);
+	dm_dmub_hw_resume(adev);
 
 	/* power on hardware */
 	dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0);
-- 
2.25.1