[PATCH 1/1] drm/amdgpu: enable wave limit on non high prio cs pipes

Alex Deucher alexdeucher at gmail.com
Wed Feb 3 16:56:55 UTC 2021


On Wed, Feb 3, 2021 at 11:07 AM Nirmoy Das <nirmoy.das at amd.com> wrote:
>
> To achieve the best QoS for high priority compute jobs it is
> required to limit waves on other compute pipes as well.
> This patch will set min value in non high priority
> mmSPI_WCL_PIPE_PERCENT_CS[0-3] registers to minimize the
> impact of normal/low priority compute jobs over high priority
> compute jobs.
>
> Signed-off-by: Nirmoy Das <nirmoy.das at amd.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 49 ++++++++++++++++++++++++++-
>  drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 46 ++++++++++++++++++++++++-
>  2 files changed, 93 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
> index bdfd29a22b3d..28dbce1083ab 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
> @@ -6846,10 +6846,44 @@ static void gfx_v8_0_emit_mem_sync_compute(struct amdgpu_ring *ring)
>         amdgpu_ring_write(ring, 0x0000000A);    /* poll interval */
>  }
>
> +
> +/* mmSPI_WCL_PIPE_PERCENT_CS[0-7]_DEFAULT values are same */
> +#define mmSPI_WCL_PIPE_PERCENT_CS_DEFAULT      0x0000007f
> +static void gfx_v8_0_emit_wave_limit_cs(struct amdgpu_ring *ring,
> +                                       uint32_t pipe, bool enable)
> +{
> +       uint32_t val;
> +       uint32_t wcl_cs_reg;
> +
> +       val = enable ? 0x1 : mmSPI_WCL_PIPE_PERCENT_CS_DEFAULT;
> +
> +       switch (pipe) {
> +       case 0:
> +               wcl_cs_reg = mmSPI_WCL_PIPE_PERCENT_CS0;
> +               break;
> +       case 1:
> +               wcl_cs_reg = mmSPI_WCL_PIPE_PERCENT_CS1;
> +               break;
> +       case 2:
> +               wcl_cs_reg = mmSPI_WCL_PIPE_PERCENT_CS2;
> +               break;
> +       case 3:
> +               wcl_cs_reg = mmSPI_WCL_PIPE_PERCENT_CS3;
> +               break;
> +       default:
> +               DRM_DEBUG("invalid pipe %d\n", pipe);
> +               return;
> +       }
> +
> +       amdgpu_ring_emit_wreg(ring, wcl_cs_reg, val);
> +
> +}
> +
>  #define mmSPI_WCL_PIPE_PERCENT_GFX_DEFAULT     0x07ffffff
>  static void gfx_v8_0_emit_wave_limit(struct amdgpu_ring *ring, bool enable)
>  {
>         uint32_t val;
> +       int i;
>
>         /* mmSPI_WCL_PIPE_PERCENT_GFX is 7 bit multiplier register to limit
>          * number of gfx waves. Setting 5 bit will make sure gfx only gets
> @@ -6857,6 +6891,18 @@ static void gfx_v8_0_emit_wave_limit(struct amdgpu_ring *ring, bool enable)
>          */
>         val = enable ? 0x1f : mmSPI_WCL_PIPE_PERCENT_GFX_DEFAULT;
>         amdgpu_ring_emit_wreg(ring, mmSPI_WCL_PIPE_PERCENT_GFX, val);
> +
> +       /* Restrict waves for normal/low priority compute queues as well
> +        * to get best QoS for high priority compute jobs.
> +        *
> +        * amdgpu controls only 1st ME(0-3 CS pipes).
> +        */
> +       for (i = 0; i < 4; i++) {

How about using adev->gfx.mec.num_pipe_per_mec instead of hardcoding 4 here?

> +               if (i != ring->pipe)
> +                       gfx_v8_0_emit_wave_limit_cs(ring, i, enable);
> +
> +       }
> +
>  }
>
>  static const struct amd_ip_funcs gfx_v8_0_ip_funcs = {
> @@ -6943,7 +6989,8 @@ static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_compute = {
>                 VI_FLUSH_GPU_TLB_NUM_WREG * 5 + 7 + /* gfx_v8_0_ring_emit_vm_flush */
>                 7 + 7 + 7 + /* gfx_v8_0_ring_emit_fence_compute x3 for user fence, vm fence */
>                 7 + /* gfx_v8_0_emit_mem_sync_compute */
> -               5, /* gfx_v8_0_emit_wave_limit for updating mmSPI_WCL_PIPE_PERCENT_GFX register */
> +               5 + /* gfx_v8_0_emit_wave_limit for updating mmSPI_WCL_PIPE_PERCENT_GFX register */
> +               15, /* for updating 3 mmSPI_WCL_PIPE_PERCENT_CS registers */
>         .emit_ib_size = 7, /* gfx_v8_0_ring_emit_ib_compute */
>         .emit_ib = gfx_v8_0_ring_emit_ib_compute,
>         .emit_fence = gfx_v8_0_ring_emit_fence_compute,
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> index 027997e95e46..e44487ae15dc 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> @@ -6668,10 +6668,42 @@ static void gfx_v9_0_emit_mem_sync(struct amdgpu_ring *ring)
>         amdgpu_ring_write(ring, 0x0000000A); /* POLL_INTERVAL */
>  }
>
> +static void gfx_v9_0_emit_wave_limit_cs(struct amdgpu_ring *ring,
> +                                       uint32_t pipe, bool enable)
> +{
> +       struct amdgpu_device *adev = ring->adev;
> +       uint32_t val;
> +       uint32_t wcl_cs_reg;
> +
> +       /* mmSPI_WCL_PIPE_PERCENT_CS[0-7]_DEFAULT values are same */
> +       val = enable ? 0x1 : mmSPI_WCL_PIPE_PERCENT_CS0_DEFAULT;
> +
> +       switch (pipe) {
> +       case 0:
> +               wcl_cs_reg = SOC15_REG_OFFSET(GC, 0, mmSPI_WCL_PIPE_PERCENT_CS0);
> +               break;
> +       case 1:
> +               wcl_cs_reg = SOC15_REG_OFFSET(GC, 0, mmSPI_WCL_PIPE_PERCENT_CS1);
> +               break;
> +       case 2:
> +               wcl_cs_reg = SOC15_REG_OFFSET(GC, 0, mmSPI_WCL_PIPE_PERCENT_CS2);
> +               break;
> +       case 3:
> +               wcl_cs_reg = SOC15_REG_OFFSET(GC, 0, mmSPI_WCL_PIPE_PERCENT_CS3);
> +               break;
> +       default:
> +               DRM_DEBUG("invalid pipe %d\n", pipe);
> +               return;
> +       }
> +
> +       amdgpu_ring_emit_wreg(ring, wcl_cs_reg, val);
> +
> +}
>  static void gfx_v9_0_emit_wave_limit(struct amdgpu_ring *ring, bool enable)
>  {
>         struct amdgpu_device *adev = ring->adev;
>         uint32_t val;
> +       int i;
>
>
>         /* mmSPI_WCL_PIPE_PERCENT_GFX is 7 bit multiplier register to limit
> @@ -6682,6 +6714,17 @@ static void gfx_v9_0_emit_wave_limit(struct amdgpu_ring *ring, bool enable)
>         amdgpu_ring_emit_wreg(ring,
>                               SOC15_REG_OFFSET(GC, 0, mmSPI_WCL_PIPE_PERCENT_GFX),
>                               val);
> +
> +       /* Restrict waves for normal/low priority compute queues as well
> +        * to get best QoS for high priority compute jobs.
> +        *
> +        * amdgpu controls only 1st ME(0-3 CS pipes).
> +        */
> +       for (i = 0; i < 4; i++) {

Same comment here.

> +               if (i != ring->pipe)
> +                       gfx_v9_0_emit_wave_limit_cs(ring, i, enable);
> +
> +       }
>  }
>
>  static const struct amd_ip_funcs gfx_v9_0_ip_funcs = {
> @@ -6774,7 +6817,8 @@ static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_compute = {
>                 2 + /* gfx_v9_0_ring_emit_vm_flush */
>                 8 + 8 + 8 + /* gfx_v9_0_ring_emit_fence x3 for user fence, vm fence */
>                 7 + /* gfx_v9_0_emit_mem_sync */
> -               5, /* gfx_v9_0_emit_wave_limit for updating mmSPI_WCL_PIPE_PERCENT_GFX register */
> +               5 + /* gfx_v9_0_emit_wave_limit for updating mmSPI_WCL_PIPE_PERCENT_GFX register */
> +               15, /* for updating 3 mmSPI_WCL_PIPE_PERCENT_CS registers */
>         .emit_ib_size = 7, /* gfx_v9_0_ring_emit_ib_compute */
>         .emit_ib = gfx_v9_0_ring_emit_ib_compute,
>         .emit_fence = gfx_v9_0_ring_emit_fence,
> --
> 2.30.0
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx


More information about the amd-gfx mailing list