[PATCH 059/159] drm/amd/swsmu: add aldebaran smu driver if header (v2)
Alex Deucher
alexander.deucher at amd.com
Wed Feb 24 22:17:19 UTC 2021
From: Kevin Wang <kevin1.wang at amd.com>
add aldebaran smu13 driver if header
v2: squash in updates
Signed-off-by: Kevin Wang <kevin1.wang at amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng at amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
.../amd/pm/inc/smu13_driver_if_aldebaran.h | 512 ++++++++++++++++++
1 file changed, 512 insertions(+)
create mode 100644 drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h
diff --git a/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h b/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h
new file mode 100644
index 000000000000..df2ead254f37
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h
@@ -0,0 +1,512 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef SMU13_DRIVER_IF_ALDEBARAN_H
+#define SMU13_DRIVER_IF_ALDEBARAN_H
+
+#define NUM_VCLK_DPM_LEVELS 8
+#define NUM_DCLK_DPM_LEVELS 8
+#define NUM_SOCCLK_DPM_LEVELS 8
+#define NUM_LCLK_DPM_LEVELS 8
+#define NUM_UCLK_DPM_LEVELS 4
+#define NUM_FCLK_DPM_LEVELS 8
+#define NUM_XGMI_DPM_LEVELS 4
+
+// Feature Control Defines
+#define FEATURE_DATA_CALCULATIONS 0
+#define FEATURE_DPM_GFXCLK_BIT 1
+#define FEATURE_DPM_UCLK_BIT 2
+#define FEATURE_DPM_SOCCLK_BIT 3
+#define FEATURE_DPM_FCLK_BIT 4
+#define FEATURE_DPM_LCLK_BIT 5
+#define FEATURE_DPM_XGMI_BIT 6
+#define FEATURE_DS_GFXCLK_BIT 7
+#define FEATURE_DS_SOCCLK_BIT 8
+#define FEATURE_DS_LCLK_BIT 9
+#define FEATURE_DS_FCLK_BIT 10
+#define FEATURE_DS_UCLK_BIT 11
+#define FEATURE_GFX_SS_BIT 12
+#define FEATURE_DPM_VCN_BIT 13
+#define FEATURE_RSMU_SMN_CG_BIT 14
+#define FEATURE_WAFL_CG_BIT 15
+#define FEATURE_PPT_BIT 16
+#define FEATURE_TDC_BIT 17
+#define FEATURE_APCC_PLUS_BIT 18
+#define FEATURE_APCC_DFLL_BIT 19
+#define FEATURE_FW_CTF_BIT 20
+#define FEATURE_THERMAL_BIT 21
+#define FEATURE_OUT_OF_BAND_MONITOR_BIT 22
+#define FEATURE_SPARE_23_BIT 23
+#define FEATURE_XGMI_PER_LINK_PWR_DWN 24
+#define FEATURE_DF_CSTATE 25
+#define FEATURE_FUSE_CG_BIT 26
+#define FEATURE_MP1_CG_BIT 27
+#define FEATURE_SMUIO_CG_BIT 28
+#define FEATURE_THM_CG_BIT 29
+#define FEATURE_CLK_CG_BIT 30
+#define FEATURE_SPARE_31_BIT 31
+#define FEATURE_SPARE_32_BIT 32
+#define FEATURE_SPARE_33_BIT 33
+#define FEATURE_SPARE_34_BIT 34
+#define FEATURE_SPARE_35_BIT 35
+#define FEATURE_SPARE_36_BIT 36
+#define FEATURE_SPARE_37_BIT 37
+#define FEATURE_SPARE_38_BIT 38
+#define FEATURE_SPARE_39_BIT 39
+#define FEATURE_SPARE_40_BIT 40
+#define FEATURE_SPARE_41_BIT 41
+#define FEATURE_SPARE_42_BIT 42
+#define FEATURE_SPARE_43_BIT 43
+#define FEATURE_SPARE_44_BIT 44
+#define FEATURE_SPARE_45_BIT 45
+#define FEATURE_SPARE_46_BIT 46
+#define FEATURE_SPARE_47_BIT 47
+#define FEATURE_SPARE_48_BIT 48
+#define FEATURE_SPARE_49_BIT 49
+#define FEATURE_SPARE_50_BIT 50
+#define FEATURE_SPARE_51_BIT 51
+#define FEATURE_SPARE_52_BIT 52
+#define FEATURE_SPARE_53_BIT 53
+#define FEATURE_SPARE_54_BIT 54
+#define FEATURE_SPARE_55_BIT 55
+#define FEATURE_SPARE_56_BIT 56
+#define FEATURE_SPARE_57_BIT 57
+#define FEATURE_SPARE_58_BIT 58
+#define FEATURE_SPARE_59_BIT 59
+#define FEATURE_SPARE_60_BIT 60
+#define FEATURE_SPARE_61_BIT 61
+#define FEATURE_SPARE_62_BIT 62
+#define FEATURE_SPARE_63_BIT 63
+
+#define NUM_FEATURES 64
+
+// I2C Config Bit Defines
+#define I2C_CONTROLLER_ENABLED 1
+#define I2C_CONTROLLER_DISABLED 0
+
+// Throttler Status Bits.
+// These are aligned with the out of band monitor alarm bits for common throttlers
+#define THROTTLER_PPT0_BIT 0
+#define THROTTLER_PPT1_BIT 1
+#define THROTTLER_TDC_GFX_BIT 2
+#define THROTTLER_TDC_SOC_BIT 3
+#define THROTTLER_TDC_HBM_BIT 4
+#define THROTTLER_SPARE_5 5
+#define THROTTLER_TEMP_GPU_BIT 6
+#define THROTTLER_TEMP_MEM_BIT 7
+#define THORTTLER_SPARE_8 8
+#define THORTTLER_SPARE_9 9
+#define THORTTLER_SPARE_10 10
+#define THROTTLER_TEMP_VR_GFX_BIT 11
+#define THROTTLER_TEMP_VR_SOC_BIT 12
+#define THROTTLER_TEMP_VR_MEM_BIT 13
+#define THORTTLER_SPARE_14 14
+#define THORTTLER_SPARE_15 15
+#define THORTTLER_SPARE_16 16
+#define THORTTLER_SPARE_17 17
+#define THORTTLER_SPARE_18 18
+#define THROTTLER_APCC_BIT 19
+
+// Table transfer status
+#define TABLE_TRANSFER_OK 0x0
+#define TABLE_TRANSFER_FAILED 0xFF
+#define TABLE_TRANSFER_PENDING 0xAB
+
+//I2C Interface
+#define NUM_I2C_CONTROLLERS 8
+
+#define I2C_CONTROLLER_ENABLED 1
+#define I2C_CONTROLLER_DISABLED 0
+
+#define MAX_SW_I2C_COMMANDS 24
+
+typedef enum {
+ I2C_CONTROLLER_PORT_0, //CKSVII2C0
+ I2C_CONTROLLER_PORT_1, //CKSVII2C1
+ I2C_CONTROLLER_PORT_COUNT,
+} I2cControllerPort_e;
+
+typedef enum {
+ I2C_CONTROLLER_THROTTLER_TYPE_NONE,
+ I2C_CONTROLLER_THROTTLER_VR_GFX0,
+ I2C_CONTROLLER_THROTTLER_VR_GFX1,
+ I2C_CONTROLLER_THROTTLER_VR_SOC,
+ I2C_CONTROLLER_THROTTLER_VR_MEM,
+ I2C_CONTROLLER_THROTTLER_COUNT,
+} I2cControllerThrottler_e;
+
+typedef enum {
+ I2C_CONTROLLER_PROTOCOL_VR_MP2855,
+ I2C_CONTROLLER_PROTOCOL_COUNT,
+} I2cControllerProtocol_e;
+
+typedef struct {
+ uint8_t Enabled;
+ uint8_t Speed;
+ uint8_t SlaveAddress;
+ uint8_t ControllerPort;
+ uint8_t ThermalThrotter;
+ uint8_t I2cProtocol;
+ uint8_t PaddingConfig[2];
+} I2cControllerConfig_t;
+
+typedef enum {
+ I2C_PORT_SVD_SCL,
+ I2C_PORT_GPIO,
+} I2cPort_e;
+
+typedef enum {
+ I2C_SPEED_FAST_50K, //50 Kbits/s
+ I2C_SPEED_FAST_100K, //100 Kbits/s
+ I2C_SPEED_FAST_400K, //400 Kbits/s
+ I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode)
+ I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode)
+ I2C_SPEED_HIGH_2M, //2.3 Mbits/s
+ I2C_SPEED_COUNT,
+} I2cSpeed_e;
+
+typedef enum {
+ I2C_CMD_READ,
+ I2C_CMD_WRITE,
+ I2C_CMD_COUNT,
+} I2cCmdType_e;
+
+#define CMDCONFIG_STOP_BIT 0
+#define CMDCONFIG_RESTART_BIT 1
+#define CMDCONFIG_READWRITE_BIT 2 //bit should be 0 for read, 1 for write
+
+#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT)
+#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT)
+#define CMDCONFIG_READWRITE_MASK (1 << CMDCONFIG_READWRITE_BIT)
+
+typedef struct {
+ uint8_t ReadWriteData; //Return data for read. Data to send for write
+ uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write
+} SwI2cCmd_t; //SW I2C Command Table
+
+typedef struct {
+ uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1)
+ uint8_t I2CSpeed; //Use I2cSpeed_e to indicate speed to select
+ uint8_t SlaveAddress; //Slave address of device
+ uint8_t NumCmds; //Number of commands
+ SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS];
+} SwI2cRequest_t; // SW I2C Request Table
+
+typedef struct {
+ SwI2cRequest_t SwI2cRequest;
+ uint32_t Spare[8];
+ uint32_t MmHubPadding[8]; // SMU internal use
+} SwI2cRequestExternal_t;
+
+typedef struct {
+ uint32_t a; // store in IEEE float format in this variable
+ uint32_t b; // store in IEEE float format in this variable
+ uint32_t c; // store in IEEE float format in this variable
+} QuadraticInt_t;
+
+typedef struct {
+ uint32_t m; // store in IEEE float format in this variable
+ uint32_t b; // store in IEEE float format in this variable
+} LinearInt_t;
+
+typedef enum {
+ GFXCLK_SOURCE_PLL,
+ GFXCLK_SOURCE_DFLL,
+ GFXCLK_SOURCE_COUNT,
+} GfxclkSrc_e;
+
+typedef enum {
+ PPCLK_GFXCLK,
+ PPCLK_VCLK,
+ PPCLK_DCLK,
+ PPCLK_SOCCLK,
+ PPCLK_UCLK,
+ PPCLK_FCLK,
+ PPCLK_LCLK,
+ PPCLK_COUNT,
+} PPCLK_e;
+
+typedef enum {
+ GPIO_INT_POLARITY_ACTIVE_LOW,
+ GPIO_INT_POLARITY_ACTIVE_HIGH,
+} GpioIntPolarity_e;
+
+//PPSMC_MSG_SetUclkDpmMode
+typedef enum {
+ UCLK_DPM_MODE_BANDWIDTH,
+ UCLK_DPM_MODE_LATENCY,
+} UCLK_DPM_MODE_e;
+
+typedef struct {
+ uint8_t StartupLevel;
+ uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used
+ uint16_t SsFmin; // Fmin for SS curve. If SS curve is selected, will use V at SSFmin for F <= Fmin
+ LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz)
+ QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V)
+} DpmDescriptor_t;
+
+typedef struct {
+ uint32_t Version;
+
+ // SECTION: Feature Enablement
+ uint32_t FeaturesToRun[2];
+
+ // SECTION: Infrastructure Limits
+ uint16_t PptLimit; // Watts
+ uint16_t TdcLimitGfx; // Amps
+ uint16_t TdcLimitSoc; // Amps
+ uint16_t TdcLimitHbm; // Amps
+ uint16_t ThotspotLimit; // Celcius
+ uint16_t TmemLimit; // Celcius
+ uint16_t Tvr_gfxLimit; // Celcius
+ uint16_t Tvr_memLimit; // Celcius
+ uint16_t Tvr_socLimit; // Celcius
+ uint16_t PaddingLimit;
+
+ // SECTION: Voltage Control Parameters
+ uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX
+ uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC
+
+ //SECTION: DPM Config 1
+ DpmDescriptor_t DpmDescriptor[PPCLK_COUNT];
+
+ uint8_t DidTableVclk[NUM_VCLK_DPM_LEVELS]; //PPCLK_VCLK
+ uint8_t DidTableDclk[NUM_DCLK_DPM_LEVELS]; //PPCLK_DCLK
+ uint8_t DidTableSocclk[NUM_SOCCLK_DPM_LEVELS]; //PPCLK_SOCCLK
+ uint8_t DidTableLclk[NUM_LCLK_DPM_LEVELS]; //PPCLK_LCLK
+ uint32_t FidTableFclk[NUM_FCLK_DPM_LEVELS]; //PPCLK_FCLK
+ uint8_t DidTableFclk[NUM_FCLK_DPM_LEVELS]; //PPCLK_FCLK
+ uint32_t FidTableUclk[NUM_UCLK_DPM_LEVELS]; //PPCLK_UCLK
+ uint8_t DidTableUclk[NUM_UCLK_DPM_LEVELS]; //PPCLK_UCLK
+
+ uint32_t StartupFidPll0; //GFXAVFSCLK, SOCCLK, MP0CLK, MPIOCLK, DXIOCLK
+ uint32_t StartupFidPll4; //VCLK, DCLK, WAFLCLK
+ uint32_t StartupFidPll5; //SMNCLK, MP1CLK, LCLK
+
+ uint8_t StartupSmnclkDid;
+ uint8_t StartupMp0clkDid;
+ uint8_t StartupMp1clkDid;
+ uint8_t StartupWaflclkDid;
+ uint8_t StartupGfxavfsclkDid;
+ uint8_t StartupMpioclkDid;
+ uint8_t StartupDxioclkDid;
+ uint8_t spare123;
+
+ uint8_t StartupVidGpu0Svi0Plane0; //VDDCR_GFX0
+ uint8_t StartupVidGpu0Svi0Plane1; //VDDCR_SOC
+ uint8_t StartupVidGpu0Svi1Plane0; //VDDCR_HBM
+ uint8_t StartupVidGpu0Svi1Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+
+ uint8_t StartupVidGpu1Svi0Plane0; //VDDCR_GFX1
+ uint8_t StartupVidGpu1Svi0Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+ uint8_t StartupVidGpu1Svi1Plane0; //UNUSED [0 = plane is not used and should not be programmed]
+ uint8_t StartupVidGpu1Svi1Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+
+ // GFXCLK DPM
+ uint16_t GfxclkFmax; // In MHz
+ uint16_t GfxclkFmin; // In MHz
+ uint16_t GfxclkFidle; // In MHz
+ uint16_t GfxclkFinit; // In MHz
+ uint8_t GfxclkSource; // GfxclkSrc_e [0 = PLL, 1 = DFLL]
+ uint8_t spare1[2];
+ uint8_t StartupGfxclkDid;
+ uint32_t StartupGfxclkFid;
+
+ // SECTION: AVFS
+ uint16_t GFX_Guardband_Freq[8]; // MHz [unsigned]
+ int16_t GFX_Guardband_Voltage_Cold[8]; // mV [signed]
+ int16_t GFX_Guardband_Voltage_Mid[8]; // mV [signed]
+ int16_t GFX_Guardband_Voltage_Hot[8]; // mV [signed]
+
+ uint16_t SOC_Guardband_Freq[8]; // MHz [unsigned]
+ int16_t SOC_Guardband_Voltage_Cold[8]; // mV [signed]
+ int16_t SOC_Guardband_Voltage_Mid[8]; // mV [signed]
+ int16_t SOC_Guardband_Voltage_Hot[8]; // mV [signed]
+
+ // VDDCR_GFX BTC
+ uint16_t DcBtcEnabled;
+ int16_t DcBtcMin; // mV [signed]
+ int16_t DcBtcMax; // mV [signed]
+ int16_t DcBtcGb; // mV [signed]
+
+ // SECTION: XGMI
+ uint8_t XgmiLinkSpeed[NUM_XGMI_DPM_LEVELS]; //Gbps [EX: 32 = 32Gbps]
+ uint8_t XgmiLinkWidth[NUM_XGMI_DPM_LEVELS]; //Width [EX: 16 = x16]
+ uint8_t XgmiStartupLevel;
+ uint8_t spare12[3];
+
+ // GFX Vmin
+ uint16_t GFX_PPVmin_Enabled;
+ uint16_t GFX_Vmin_Plat_Offset_Hot; // mV
+ uint16_t GFX_Vmin_Plat_Offset_Cold; // mV
+ uint16_t GFX_Vmin_Hot_T0; // mV
+ uint16_t GFX_Vmin_Cold_T0; // mV
+ uint16_t GFX_Vmin_Hot_Eol; // mV
+ uint16_t GFX_Vmin_Cold_Eol; // mV
+ uint16_t GFX_Vmin_Aging_Offset; // mV
+ uint16_t GFX_Vmin_Temperature_Hot; // 'C
+ uint16_t GFX_Vmin_Temperature_Cold; // 'C
+
+ // SOC Vmin
+ uint16_t SOC_PPVmin_Enabled;
+ uint16_t SOC_Vmin_Plat_Offset_Hot; // mV
+ uint16_t SOC_Vmin_Plat_Offset_Cold; // mV
+ uint16_t SOC_Vmin_Hot_T0; // mV
+ uint16_t SOC_Vmin_Cold_T0; // mV
+ uint16_t SOC_Vmin_Hot_Eol; // mV
+ uint16_t SOC_Vmin_Cold_Eol; // mV
+ uint16_t SOC_Vmin_Aging_Offset; // mV
+ uint16_t SOC_Vmin_Temperature_Hot; // 'C
+ uint16_t SOC_Vmin_Temperature_Cold; // 'C
+
+ // APCC Settings
+ uint32_t ApccPlusResidencyLimit; //PCC residency % (0-100)
+
+ // Determinism
+ uint16_t DeterminismVoltageOffset; //mV
+ uint16_t spare22;
+
+ // reserved
+ uint32_t spare3[14];
+
+ // SECTION: BOARD PARAMETERS
+ // Telemetry Settings
+ uint16_t GfxMaxCurrent; // in Amps
+ int8_t GfxOffset; // in Amps
+ uint8_t Padding_TelemetryGfx;
+
+ uint16_t SocMaxCurrent; // in Amps
+ int8_t SocOffset; // in Amps
+ uint8_t Padding_TelemetrySoc;
+
+ uint16_t MemMaxCurrent; // in Amps
+ int8_t MemOffset; // in Amps
+ uint8_t Padding_TelemetryMem;
+
+ uint16_t BoardMaxCurrent; // in Amps
+ int8_t BoardOffset; // in Amps
+ uint8_t Padding_TelemetryBoardInput;
+
+ // Platform input telemetry voltage coefficient
+ uint32_t BoardVoltageCoeffA; // decode by /1000
+ uint32_t BoardVoltageCoeffB; // decode by /1000
+
+ // GPIO Settings
+ uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
+ uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
+ uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
+ uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
+
+ // UCLK Spread Spectrum
+ uint8_t UclkSpreadEnabled; // on or off
+ uint8_t UclkSpreadPercent; // Q4.4
+ uint16_t UclkSpreadFreq; // kHz
+
+ // FCLK Spread Spectrum
+ uint8_t FclkSpreadEnabled; // on or off
+ uint8_t FclkSpreadPercent; // Q4.4
+ uint16_t FclkSpreadFreq; // kHz
+
+ // I2C Controller Structure
+ I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS];
+
+ // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
+ uint8_t GpioI2cScl; // Serial Clock
+ uint8_t GpioI2cSda; // Serial Data
+ uint16_t spare5;
+
+ //reserved
+ uint32_t reserved[16];
+
+} PPTable_t;
+
+typedef struct {
+ // Time constant parameters for clock averages in ms
+ uint16_t GfxclkAverageLpfTau;
+ uint16_t SocclkAverageLpfTau;
+ uint16_t UclkAverageLpfTau;
+ uint16_t GfxActivityLpfTau;
+ uint16_t UclkActivityLpfTau;
+
+ uint16_t SocketPowerLpfTau;
+
+ uint32_t Spare[8];
+ // Padding - ignore
+ uint32_t MmHubPadding[8]; // SMU internal use
+} DriverSmuConfig_t;
+
+typedef struct {
+ uint16_t CurrClock[PPCLK_COUNT];
+ uint16_t Padding1 ;
+ uint16_t AverageGfxclkFrequency;
+ uint16_t AverageSocclkFrequency;
+ uint16_t AverageUclkFrequency ;
+ uint16_t AverageGfxActivity ;
+ uint16_t AverageUclkActivity ;
+ uint8_t CurrSocVoltageOffset ;
+ uint8_t CurrGfxVoltageOffset ;
+ uint8_t CurrMemVidOffset ;
+ uint8_t Padding8 ;
+ uint16_t AverageSocketPower ;
+ uint16_t TemperatureEdge ;
+ uint16_t TemperatureHotspot ;
+ uint16_t TemperatureHBM ; // Max
+ uint16_t TemperatureVrGfx ;
+ uint16_t TemperatureVrSoc ;
+ uint16_t TemperatureVrMem ;
+ uint32_t ThrottlerStatus ;
+
+ uint32_t PublicSerialNumLower32;
+ uint32_t PublicSerialNumUpper32;
+ uint16_t TemperatureAllHBM[4] ;
+ uint32_t GfxBusyAcc ;
+ uint32_t DramBusyAcc ;
+ uint32_t Spare[4];
+
+ // Padding - ignore
+ uint32_t MmHubPadding[8]; // SMU internal use
+} SmuMetrics_t;
+
+
+typedef struct {
+ uint16_t avgPsmCount[76];
+ uint16_t minPsmCount[76];
+ float avgPsmVoltage[76];
+ float minPsmVoltage[76];
+
+ uint32_t MmHubPadding[8]; // SMU internal use
+} AvfsDebugTable_t;
+
+// These defines are used with the following messages:
+// SMC_MSG_TransferTableDram2Smu
+// SMC_MSG_TransferTableSmu2Dram
+#define TABLE_PPTABLE 0
+#define TABLE_AVFS_PSM_DEBUG 1
+#define TABLE_AVFS_FUSE_OVERRIDE 2
+#define TABLE_PMSTATUSLOG 3
+#define TABLE_SMU_METRICS 4
+#define TABLE_DRIVER_SMU_CONFIG 5
+#define TABLE_I2C_COMMANDS 6
+#define TABLE_COUNT 7
+
+#endif
--
2.29.2
More information about the amd-gfx
mailing list