[PATCH] drm/amdgpu: Add RLC_PG_DELAY_3 for Vangogh

[Jinzhou Su]

Copy from RLC MAS:

Driver should enable the CGPG feature for RLC while it is in
safe mode to prevent any misalignment or conflict while it is
in middle of any power feature entry/exit sequence. This can
be achieved by setting RLC_PG_CNTL.GFX_POWER_GATING_ENABLE = 0x1,
and RLC_PG_DELAY_3.CGCG_ACTIVE_BEFORE_CGPG to the desired CGPG
hysteresis value in refclk count.

Signed-off-by: Jinzhou Su <Jinzhou.Su at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index c4314e25f560..23a11ec40c33 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -120,6 +120,7 @@
 #define mmSPI_CONFIG_CNTL_Vangogh_BASE_IDX       1
 #define mmGCR_GENERAL_CNTL_Vangogh               0x1580
 #define mmGCR_GENERAL_CNTL_Vangogh_BASE_IDX      0
+#define RLC_PG_DELAY_3__CGCG_ACTIVE_BEFORE_CGPG_MASK_Vangogh   0x0000FFFFL
 
 #define mmCP_HYP_PFP_UCODE_ADDR			0x5814
 #define mmCP_HYP_PFP_UCODE_ADDR_BASE_IDX	1
@@ -7829,6 +7830,17 @@ static void gfx_v10_cntl_power_gating(struct amdgpu_device *adev, bool enable)
 		data &= ~RLC_PG_CNTL__GFX_POWER_GATING_ENABLE_MASK;
 
 	WREG32_SOC15(GC, 0, mmRLC_PG_CNTL, data);
+
+	/*
+	 * CGPG enablement required and the register to program the hysteresis value
+	 * RLC_PG_DELAY_3.CGCG_ACTIVE_BEFORE_CGPG to the desired CGPG hysteresis value
+	 * in refclk count. Note that RLC FW is modified to take 16 bits from
+	 * RLC_PG_DELAY_3[15:0] as the hysteresis instead of just 8 bits.
+	 */
+	if (enable && (adev->pg_flags & AMD_PG_SUPPORT_GFX_PG) && adev->asic_type == CHIP_VANGOGH) {
+		data = 0x4E20 & RLC_PG_DELAY_3__CGCG_ACTIVE_BEFORE_CGPG_MASK_Vangogh;
+		WREG32_SOC15(GC, 0, mmRLC_PG_DELAY_3, data);
+	}
 }
 
 static void gfx_v10_cntl_pg(struct amdgpu_device *adev, bool enable)
-- 
2.17.1