[PATCH v2] Revert "drm/amd/display: Tune min clk values for MPO for RV"

[Pratik Vishwakarma]

This reverts commit 6f3fca64cfb91fedf9b34ea27b2581e88d48c9b2.
Original issue of flash line when MPO enabled on idle screen
was fixed by raising clocks. This had negative effect of extra
power being drained. With the upstream commit 9d03bb102028
("drm/amd/display: disable dcn10 pipe split by default")
flash line issue was fixed and had positive effect for
battery life. Hence this patch is no more required.

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma at amd.com>
---
 .../display/dc/clk_mgr/dcn10/rv1_clk_mgr.c    | 30 ++-----------------
 1 file changed, 3 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c
index 75b8240ed059..e133edc587d3 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c
@@ -187,17 +187,6 @@ static void ramp_up_dispclk_with_dpp(
 	clk_mgr->base.clks.max_supported_dppclk_khz = new_clocks->max_supported_dppclk_khz;
 }
 
-static bool is_mpo_enabled(struct dc_state *context)
-{
-	int i;
-
-	for (i = 0; i < context->stream_count; i++) {
-		if (context->stream_status[i].plane_count > 1)
-			return true;
-	}
-	return false;
-}
-
 static void rv1_update_clocks(struct clk_mgr *clk_mgr_base,
 			struct dc_state *context,
 			bool safe_to_lower)
@@ -295,22 +284,9 @@ static void rv1_update_clocks(struct clk_mgr *clk_mgr_base,
 		if (pp_smu->set_hard_min_fclk_by_freq &&
 				pp_smu->set_hard_min_dcfclk_by_freq &&
 				pp_smu->set_min_deep_sleep_dcfclk) {
-			// Only increase clocks when display is active and MPO is enabled
-			if (display_count && is_mpo_enabled(context)) {
-				pp_smu->set_hard_min_fclk_by_freq(&pp_smu->pp_smu,
-						((new_clocks->fclk_khz / 1000) *  101) / 100);
-				pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu,
-						((new_clocks->dcfclk_khz / 1000) * 101) / 100);
-				pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu,
-						(new_clocks->dcfclk_deep_sleep_khz + 999) / 1000);
-			} else {
-				pp_smu->set_hard_min_fclk_by_freq(&pp_smu->pp_smu,
-						new_clocks->fclk_khz / 1000);
-				pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu,
-						new_clocks->dcfclk_khz / 1000);
-				pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu,
-						(new_clocks->dcfclk_deep_sleep_khz + 999) / 1000);
-			}
+			pp_smu->set_hard_min_fclk_by_freq(&pp_smu->pp_smu, new_clocks->fclk_khz / 1000);
+			pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu, new_clocks->dcfclk_khz / 1000);
+			pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu, (new_clocks->dcfclk_deep_sleep_khz + 999) / 1000);
 		}
 	}
 }
-- 
2.25.1