[PATCH 10/40] drm/amdgpu: rework smu11 i2c for generic operation

[Luben Tuikov]

From: Aaron Rice <wolf at lovehindpa.ws>

Handle things besides EEPROMS.

Signed-off-by: Aaron Rice <wolf at lovehindpa.ws>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c | 47 +++++-----------------
 1 file changed, 9 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
index 3a164d93c90293..3193d566f4f87e 100644
--- a/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
+++ b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
@@ -117,8 +117,7 @@ static void smu_v11_0_i2c_set_address(struct i2c_adapter *control, uint8_t addre
 {
 	struct amdgpu_device *adev = to_amdgpu_device(control);
 
-	/* Convert fromr 8-bit to 7-bit address */
-	address >>= 1;
+	/* We take 7-bit addresses raw */
 	WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TAR, (address & 0xFF));
 }
 
@@ -531,22 +530,14 @@ static bool smu_v11_0_i2c_bus_unlock(struct i2c_adapter *control)
 /***************************** I2C GLUE ****************************/
 
 static uint32_t smu_v11_0_i2c_read_data(struct i2c_adapter *control,
-					uint8_t address,
-					uint8_t *data,
-					uint32_t numbytes)
+					struct i2c_msg *msg)
 {
 	uint32_t  ret = 0;
 
-	/* First 2 bytes are dummy write to set EEPROM address */
-	ret = smu_v11_0_i2c_transmit(control, address, data, 2, I2C_NO_STOP);
-	if (ret != I2C_OK)
-		goto Fail;
-
 	/* Now read data starting with that address */
-	ret = smu_v11_0_i2c_receive(control, address, data + 2, numbytes - 2,
+	ret = smu_v11_0_i2c_receive(control, msg->addr, msg->buf, msg->len,
 				    I2C_RESTART);
 
-Fail:
 	if (ret != I2C_OK)
 		DRM_ERROR("ReadData() - I2C error occurred :%x", ret);
 
@@ -554,28 +545,16 @@ static uint32_t smu_v11_0_i2c_read_data(struct i2c_adapter *control,
 }
 
 static uint32_t smu_v11_0_i2c_write_data(struct i2c_adapter *control,
-					 uint8_t address,
-					 uint8_t *data,
-					 uint32_t numbytes)
+					struct i2c_msg *msg)
 {
 	uint32_t  ret;
 
-	ret = smu_v11_0_i2c_transmit(control, address, data, numbytes, 0);
+	/* Send I2C_NO_STOP unless requested to stop. */
+	ret = smu_v11_0_i2c_transmit(control, msg->addr, msg->buf, msg->len, ((msg->flags & I2C_M_STOP) ? 0 : I2C_NO_STOP));
 
 	if (ret != I2C_OK)
 		DRM_ERROR("WriteI2CData() - I2C error occurred :%x", ret);
-	else
-		/*
-		 * According to EEPROM spec there is a MAX of 10 ms required for
-		 * EEPROM to flush internal RX buffer after STOP was issued at the
-		 * end of write transaction. During this time the EEPROM will not be
-		 * responsive to any more commands - so wait a bit more.
-		 *
-		 * TODO Improve to wait for first ACK for slave address after
-		 * internal write cycle done.
-		 */
-		msleep(10);
-
+	
 	return ret;
 
 }
@@ -618,24 +597,16 @@ static int smu_v11_0_i2c_xfer(struct i2c_adapter *i2c_adap,
 			      struct i2c_msg *msgs, int num)
 {
 	int i, ret;
-	struct amdgpu_device *adev = to_amdgpu_device(i2c_adap);
-
-	if (!adev->pm.bus_locked) {
-		DRM_ERROR("I2C bus unlocked, stopping transaction!");
-		return -EIO;
-	}
 
 	smu_v11_0_i2c_init(i2c_adap);
 
 	for (i = 0; i < num; i++) {
 		if (msgs[i].flags & I2C_M_RD)
 			ret = smu_v11_0_i2c_read_data(i2c_adap,
-						      (uint8_t)msgs[i].addr,
-						      msgs[i].buf, msgs[i].len);
+						      msgs + i);
 		else
 			ret = smu_v11_0_i2c_write_data(i2c_adap,
-						       (uint8_t)msgs[i].addr,
-						       msgs[i].buf, msgs[i].len);
+						       msgs + i);
 
 		if (ret != I2C_OK) {
 			num = -EIO;
-- 
2.32.0