[PATCH 15/24] drm/amd/display: Always write repeater mode regardless of LTTPR

[Anson Jacob]

From: Wesley Chalmers <Wesley.Chalmers at amd.com>

[WHY]
SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE
programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value
other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.

[HOW]
Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is
requested.
Write Transparent in all other cases.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers at amd.com>
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Anson Jacob <Anson.Jacob at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 586f05a6cd77..c68b49a14f88 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1618,11 +1618,10 @@ enum dc_status dpcd_configure_lttpr_mode(struct dc_link *link, struct link_train
 {
 	enum dc_status status = DC_OK;
 
-	if (lt_settings->lttpr_mode == LTTPR_MODE_TRANSPARENT)
-		status = configure_lttpr_mode_transparent(link);
-
-	else if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
+	if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
 		status = configure_lttpr_mode_non_transparent(link, lt_settings);
+	else
+		status = configure_lttpr_mode_transparent(link);
 
 	return status;
 }
-- 
2.25.1