[PATCH v4 15/17] drm/uAPI: Move "Broadcast RGB" property from driver specific to general context
Werner Sembach
wse at tuxedocomputers.com
Fri Jun 25 08:48:27 UTC 2021
Am 23.06.21 um 13:26 schrieb Pekka Paalanen:
> On Wed, 23 Jun 2021 12:10:14 +0200
> Werner Sembach <wse at tuxedocomputers.com> wrote:
>
>> Am 23.06.21 um 09:48 schrieb Pekka Paalanen:
>>> On Tue, 22 Jun 2021 11:57:53 +0200
>>> Werner Sembach <wse at tuxedocomputers.com> wrote:
>>>
>>>> Am 22.06.21 um 09:25 schrieb Pekka Paalanen:
>>>>> On Fri, 18 Jun 2021 11:11:14 +0200
>>>>> Werner Sembach <wse at tuxedocomputers.com> wrote:
>>>>>
>>>>>> Add "Broadcast RGB" to general drm context so that more drivers besides
>>>>>> i915 and gma500 can implement it without duplicating code.
>>>>>>
>>>>>> Userspace can use this property to tell the graphic driver to use full or
>>>>>> limited color range for a given connector, overwriting the default
>>>>>> behaviour/automatic detection.
>>>>>>
>>>>>> Possible options are:
>>>>>> - Automatic (default/current behaviour)
>>>>>> - Full
>>>>>> - Limited 16:235
>>>>>>
>>>>>> In theory the driver should be able to automatically detect the monitors
>>>>>> capabilities, but because of flawed standard implementations in Monitors,
>>>>>> this might fail. In this case a manual overwrite is required to not have
>>>>>> washed out colors or lose details in very dark or bright scenes.
>>>>>>
>>>>>> Signed-off-by: Werner Sembach <wse at tuxedocomputers.com>
>>>>>> ---
>>>>>> drivers/gpu/drm/drm_atomic_helper.c | 4 +++
>>>>>> drivers/gpu/drm/drm_atomic_uapi.c | 4 +++
>>>>>> drivers/gpu/drm/drm_connector.c | 43 +++++++++++++++++++++++++++++
>>>>>> include/drm/drm_connector.h | 16 +++++++++++
>>>>>> 4 files changed, 67 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
>>>>>> index 90d62f305257..0c89d32efbd0 100644
>>>>>> --- a/drivers/gpu/drm/drm_atomic_helper.c
>>>>>> +++ b/drivers/gpu/drm/drm_atomic_helper.c
>>>>>> @@ -691,6 +691,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
>>>>>> if (old_connector_state->preferred_color_format !=
>>>>>> new_connector_state->preferred_color_format)
>>>>>> new_crtc_state->connectors_changed = true;
>>>>>> +
>>>>>> + if (old_connector_state->preferred_color_range !=
>>>>>> + new_connector_state->preferred_color_range)
>>>>>> + new_crtc_state->connectors_changed = true;
>>>>>> }
>>>>>>
>>>>>> if (funcs->atomic_check)
>>>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>>>>> index c536f5e22016..c589bb1a8163 100644
>>>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>>>>> @@ -798,6 +798,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
>>>>>> state->max_requested_bpc = val;
>>>>>> } else if (property == connector->preferred_color_format_property) {
>>>>>> state->preferred_color_format = val;
>>>>>> + } else if (property == connector->preferred_color_range_property) {
>>>>>> + state->preferred_color_range = val;
>>>>>> } else if (connector->funcs->atomic_set_property) {
>>>>>> return connector->funcs->atomic_set_property(connector,
>>>>>> state, property, val);
>>>>>> @@ -877,6 +879,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
>>>>>> *val = state->max_requested_bpc;
>>>>>> } else if (property == connector->preferred_color_format_property) {
>>>>>> *val = state->preferred_color_format;
>>>>>> + } else if (property == connector->preferred_color_range_property) {
>>>>>> + *val = state->preferred_color_range;
>>>>>> } else if (connector->funcs->atomic_get_property) {
>>>>>> return connector->funcs->atomic_get_property(connector,
>>>>>> state, property, val);
>>>>>> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
>>>>>> index aea03dd02e33..9bc596638613 100644
>>>>>> --- a/drivers/gpu/drm/drm_connector.c
>>>>>> +++ b/drivers/gpu/drm/drm_connector.c
>>>>>> @@ -905,6 +905,12 @@ static const struct drm_prop_enum_list drm_active_color_format_enum_list[] = {
>>>>>> { DRM_COLOR_FORMAT_YCRCB420, "ycbcr420" },
>>>>>> };
>>>>>>
>>>>>> +static const struct drm_prop_enum_list drm_preferred_color_range_enum_list[] = {
>>>>>> + { DRM_MODE_COLOR_RANGE_UNSET, "Automatic" },
>>>>>> + { DRM_MODE_COLOR_RANGE_FULL, "Full" },
>>>>>> + { DRM_MODE_COLOR_RANGE_LIMITED_16_235, "Limited 16:235" },
>>>>> Hi,
>>>>>
>>>>> the same question here about these numbers as I asked on the "active
>>>>> color range" property.
>>>>>
>>>>>> +};
>>>>>> +
>>>>>> static const struct drm_prop_enum_list drm_active_color_range_enum_list[] = {
>>>>>> { DRM_MODE_COLOR_RANGE_UNSET, "Unknown" },
>>>>>> { DRM_MODE_COLOR_RANGE_FULL, "Full" },
>>>>>> @@ -1243,6 +1249,13 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
>>>>>> * drm_connector_attach_active_color_format_property() to install this
>>>>>> * property.
>>>>>> *
>>>>>> + * Broadcast RGB:
>>>>>> + * This property is used by userspace to change the used color range. When
>>>>>> + * used the driver will use the selected range if valid for the current
>>>>>> + * color format. Drivers to use the function
>>>>>> + * drm_connector_attach_preferred_color_format_property() to create and
>>>>>> + * attach the property to the connector during initialization.
>>>>> An important detail to document here is: does userspace need to
>>>>> take care that pixel data at the connector will already match the set
>>>>> range, or will the driver program the hardware to produce the set range?
>>>> Since until now, the userspace didn't even know for sure if RGB or YCbCr and therefore which full/limited format was
>>>> used I guess it's all kernel space conversion.
>>>>> If the former, then I'm afraid the preference/active property pair
>>>>> design does not work. Userspace needs to make sure the content is in
>>>>> the right range, so the driver cannot second-guess that afterwards.
>>>>>
>>>>> If the latter, then what does the driver assume about color range just
>>>>> before the automatic conversion to the final color range, and does the
>>>>> range conversion happen as the final step in the color pipeline?
>>>>>
>>>>> If I remember the discussion about Intel right, then the driver does
>>>>> the latter and assume that userspace programs KMS to always produce
>>>>> full range pixels. There is no provision for userspace to produce
>>>>> limited range pixels, IIRC.
>>>> I think I remember this too from an answer to one of the revisions of this patchset.
>>> As long as you keep the old KMS property as is, just moving code so it
>>> is used by more drivers, this is fine and one can't do otherwise anyway.
>>>
>>> (The rest of this email is merely pondering the future, so not about
>>> this patch in particular.)
>>>
>>>
>>> But if we had a new, more general property for the range reported to
>>> monitors via infoframes, then it would be worth to re-visit the design.
>>> The HDR properties only set the infoframe and expect userspace to make
>>> sure that the pixels actually correspond to what the infoframes tell
>>> the monitor. One can't do HDR tone mapping automatically in the kernel,
>>> so in that sense the HDR property behaviour is obvious. But which
>>> behaviour would fit range property or others better, I'm not sure.
>>>
>>> Generally there seems to be two approaches to designing KMS properties:
>>>
>>> - Let userspace describe what data it has and what data should be sent
>>> to a monitor, and let the kernel driver magically come up with a
>>> conversion.
>>>
>>> - Only userspace understands how the pixel data is encoded, and
>>> programs the transformations (DEGAMMA/CTM/GAMMA etc.) such, that the
>>> result is what a monitor expects based on e.g. infoframes.
>> Why not both?
> Because "both" means you have overlapping sets of properties that might
> contradict each other. Or then you need a switch between the two models.
>
>> This patchset is thought to control what's happening "on the cable",
>> so if the input data is in a different format, the kernel has to
>> convert it.
> Right, if that is the desired semantics.
>
> That's not how the HDR property works. Kernel does not convert there.
> The HDR property only sets infoframes that the monitor interprets.
>
>> Maybe in the future there could be an additional set of "input-"
>> properties. aka "input bpc", "input color format", and "input color
>> range". With an additional constraint that if "input-" property ==
>> "active-" property the kernel is not allowed to do any conversion
>> regarding this aspect, giving userspace full control if wanted.
> If by "input" you mean "the result from userspace provided content
> going through the configured KMS pixel pipeline", then yes. But it's
> hard to put it into words accurately.
>
> The FB could contain whatever which userspace then programs DEGAMMA and
> CTM to produce what would be the "input" pixels for example.
>
> This is getting closer to the "abstract KMS pipeline" idea which has
> been predicted to fall apart in the email thread linked below.
Ok, I'm not deep enough in the topic. For this patchset anyways I try to stick to the preexisting behavior of "max bpc"
and "Broadcast RGB", which I believe is the "on the cable/kernel does the conversion" discussed. I will double check on
that before I submit the next revision.
>
>>> Doing the former requires policy in the kernel. If there is a
>>> specification that uniquely defines what the conversion is, this is
>>> good. But if not or if there are artistic decisions to be made, like
>>> with HDR tone mapping, then it doesn't work.
>>>
>>> OTOH, the former approach allows the driver to use any and all hardware
>>> features it has to realize the conversion, perhaps taking advantage of
>>> even fixed-function hardware blocks. The latter approach is much harder
>>> to map to hardware features.
>>>
>>> This dilemma has been discussed in length in
>>> https://lists.freedesktop.org/archives/dri-devel/2021-June/311689.html
>>>
> Thanks,
> pq
More information about the amd-gfx
mailing list