[PATCH] drm/amd/display: Use DRM_DEBUG_DP
Alex Deucher
alexdeucher at gmail.com
Tue Mar 23 14:26:03 UTC 2021
On Mon, Mar 22, 2021 at 8:31 PM Luben Tuikov <luben.tuikov at amd.com> wrote:
>
> Convert IRQ-based prints from DRM_DEBUG_DRIVER to
> DRM_DEBUG_DP, as the latter is not used in drm/amd
> prior to this patch and since IRQ-based prints
> drown out the rest of the driver's
> DRM_DEBUG_DRIVER messages.
>
> Cc: Harry Wentland <Harry.Wentland at amd.com>
> Cc: Alex Deucher <alexander.deucher at amd.com>
> Signed-off-by: Luben Tuikov <luben.tuikov at amd.com>
> ---
> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 67 +++++++++----------
> 1 file changed, 33 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index f455fc3aa561..aabaa652f6dc 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -449,9 +449,9 @@ static void dm_pflip_high_irq(void *interrupt_params)
> amdgpu_crtc->pflip_status = AMDGPU_FLIP_NONE;
> spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags);
>
> - DRM_DEBUG_DRIVER("crtc:%d[%p], pflip_stat:AMDGPU_FLIP_NONE, vrr[%d]-fp %d\n",
> - amdgpu_crtc->crtc_id, amdgpu_crtc,
> - vrr_active, (int) !e);
> + DRM_DEBUG_DP("crtc:%d[%p], pflip_stat:AMDGPU_FLIP_NONE, vrr[%d]-fp %d\n",
Should probably be _KMS or _ATOMIC since this is not displayport specific.
> + amdgpu_crtc->crtc_id, amdgpu_crtc,
> + vrr_active, (int) !e);
> }
>
> static void dm_vupdate_high_irq(void *interrupt_params)
> @@ -993,8 +993,7 @@ static void event_mall_stutter(struct work_struct *work)
> dc_allow_idle_optimizations(
> dm->dc, dm->active_vblank_irq_count == 0);
>
> - DRM_DEBUG_DRIVER("Allow idle optimizations (MALL): %d\n", dm->active_vblank_irq_count == 0);
> -
> + DRM_DEBUG_DP("Allow idle optimizations (MALL): %d\n", dm->active_vblank_irq_count == 0);
Maybe _VBL or _KMS or _ATOMIC?
>
> mutex_unlock(&dm->dc_lock);
> }
> @@ -1810,8 +1809,8 @@ static void dm_gpureset_toggle_interrupts(struct amdgpu_device *adev,
> if (acrtc && state->stream_status[i].plane_count != 0) {
> irq_source = IRQ_TYPE_PFLIP + acrtc->otg_inst;
> rc = dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY;
> - DRM_DEBUG("crtc %d - vupdate irq %sabling: r=%d\n",
> - acrtc->crtc_id, enable ? "en" : "dis", rc);
> + DRM_DEBUG_DP("crtc %d - vupdate irq %sabling: r=%d\n",
> + acrtc->crtc_id, enable ? "en" : "dis", rc);
I think this should be _VBL.
> if (rc)
> DRM_WARN("Failed to %s pflip interrupts\n",
> enable ? "enable" : "disable");
> @@ -4966,8 +4965,8 @@ static void update_stream_scaling_settings(const struct drm_display_mode *mode,
> stream->src = src;
> stream->dst = dst;
>
> - DRM_DEBUG_DRIVER("Destination Rectangle x:%d y:%d width:%d height:%d\n",
> - dst.x, dst.y, dst.width, dst.height);
> + DRM_DEBUG_DP("Destination Rectangle x:%d y:%d width:%d height:%d\n",
> + dst.x, dst.y, dst.width, dst.height);
Should probably be _KMS or _ATOMIC since this is not displayport specific.
>
> }
>
> @@ -5710,8 +5709,8 @@ static inline int dm_set_vupdate_irq(struct drm_crtc *crtc, bool enable)
>
> rc = dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY;
>
> - DRM_DEBUG_DRIVER("crtc %d - vupdate irq %sabling: r=%d\n",
> - acrtc->crtc_id, enable ? "en" : "dis", rc);
> + DRM_DEBUG_DP("crtc %d - vupdate irq %sabling: r=%d\n",
> + acrtc->crtc_id, enable ? "en" : "dis", rc);
Should probably be _VBL.
> return rc;
> }
>
> @@ -6664,7 +6663,7 @@ static int dm_plane_helper_prepare_fb(struct drm_plane *plane,
> int r;
>
> if (!new_state->fb) {
> - DRM_DEBUG_DRIVER("No FB bound\n");
> + DRM_DEBUG_DP("No FB bound\n");
Should probably be _KMS or _ATOMIC since this is not displayport specific.
> return 0;
> }
>
> @@ -7896,11 +7895,11 @@ static void handle_cursor_update(struct drm_plane *plane,
> if (!plane->state->fb && !old_plane_state->fb)
> return;
>
> - DRM_DEBUG_DRIVER("%s: crtc_id=%d with size %d to %d\n",
> - __func__,
> - amdgpu_crtc->crtc_id,
> - plane->state->crtc_w,
> - plane->state->crtc_h);
> + DRM_DEBUG_DP("%s: crtc_id=%d with size %d to %d\n",
> + __func__,
> + amdgpu_crtc->crtc_id,
> + plane->state->crtc_w,
> + plane->state->crtc_h);
Should probably be _KMS or _ATOMIC since this is not displayport specific.
>
> ret = get_cursor_position(plane, crtc, &position);
> if (ret)
> @@ -7958,8 +7957,8 @@ static void prepare_flip_isr(struct amdgpu_crtc *acrtc)
> /* Mark this event as consumed */
> acrtc->base.state->event = NULL;
>
> - DRM_DEBUG_DRIVER("crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n",
> - acrtc->crtc_id);
> + DRM_DEBUG_DP("crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n",
> + acrtc->crtc_id);
Should probably be _KMS or _ATOMIC since this is not displayport specific.
> }
>
> static void update_freesync_state_on_stream(
> @@ -8265,9 +8264,9 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
> &bundle->flip_addrs[planes_count].address,
> afb->tmz_surface, false);
>
> - DRM_DEBUG_DRIVER("plane: id=%d dcc_en=%d\n",
> - new_plane_state->plane->index,
> - bundle->plane_infos[planes_count].dcc.enable);
> + DRM_DEBUG_DP("plane: id=%d dcc_en=%d\n",
> + new_plane_state->plane->index,
> + bundle->plane_infos[planes_count].dcc.enable);
Should probably be _ATOMIC.
>
> bundle->surface_updates[planes_count].plane_info =
> &bundle->plane_infos[planes_count];
> @@ -8299,10 +8298,10 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
> dc_plane,
> bundle->flip_addrs[planes_count].flip_timestamp_in_us);
>
> - DRM_DEBUG_DRIVER("%s Flipping to hi: 0x%x, low: 0x%x\n",
> - __func__,
> - bundle->flip_addrs[planes_count].address.grph.addr.high_part,
> - bundle->flip_addrs[planes_count].address.grph.addr.low_part);
> + DRM_DEBUG_DP("%s Flipping to hi: 0x%x, low: 0x%x\n",
> + __func__,
> + bundle->flip_addrs[planes_count].address.grph.addr.high_part,
> + bundle->flip_addrs[planes_count].address.grph.addr.low_part);
>
Same here.
> planes_count += 1;
>
> @@ -8621,7 +8620,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
> dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
> dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
>
> - DRM_DEBUG_DRIVER(
> + DRM_DEBUG_DP(
And here.
> "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, "
> "planes_changed:%d, mode_changed:%d,active_changed:%d,"
> "connectors_changed:%d\n",
> @@ -8655,7 +8654,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
>
> if (modeset_required(new_crtc_state, dm_new_crtc_state->stream, dm_old_crtc_state->stream)) {
>
> - DRM_DEBUG_DRIVER("Atomic commit: SET crtc id %d: [%p]\n", acrtc->crtc_id, acrtc);
> + DRM_DEBUG_DP("Atomic commit: SET crtc id %d: [%p]\n", acrtc->crtc_id, acrtc);
>
And here.
> if (!dm_new_crtc_state->stream) {
> /*
> @@ -8688,7 +8687,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
> crtc->hwmode = new_crtc_state->mode;
> mode_set_reset_required = true;
> } else if (modereset_required(new_crtc_state)) {
> - DRM_DEBUG_DRIVER("Atomic commit: RESET. crtc id %d:[%p]\n", acrtc->crtc_id, acrtc);
> + DRM_DEBUG_DP("Atomic commit: RESET. crtc id %d:[%p]\n", acrtc->crtc_id, acrtc);
And here.
> /* i.e. reset mode */
> if (dm_old_crtc_state->stream)
> remove_stream(adev, acrtc, dm_old_crtc_state->stream);
> @@ -9298,7 +9297,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
> if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
> goto skip_modeset;
>
> - DRM_DEBUG_DRIVER(
> + DRM_DEBUG_DP(
Should probably be _KMS or _ATOMIC since this is not displayport specific.
> "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, "
> "planes_changed:%d, mode_changed:%d,active_changed:%d,"
> "connectors_changed:%d\n",
> @@ -9382,8 +9381,8 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
>
> dc_stream_retain(new_stream);
>
> - DRM_DEBUG_DRIVER("Enabling DRM crtc: %d\n",
> - crtc->base.id);
> + DRM_DEBUG_DP("Enabling DRM crtc: %d\n",
> + crtc->base.id);
>
Same here.
> if (dc_add_stream_to_ctx(
> dm->dc,
> @@ -9728,8 +9727,8 @@ static int dm_update_plane_state(struct dc *dc,
> if (!dc_new_plane_state)
> return -ENOMEM;
>
> - DRM_DEBUG_DRIVER("Enabling DRM plane: %d on DRM crtc %d\n",
> - plane->base.id, new_plane_crtc->base.id);
> + DRM_DEBUG_DP("Enabling DRM plane: %d on DRM crtc %d\n",
> + plane->base.id, new_plane_crtc->base.id);
>
And here.
> ret = fill_dc_plane_attributes(
> drm_to_adev(new_plane_crtc->dev),
> --
> 2.31.0.rc2
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
More information about the amd-gfx
mailing list