AMDGPU error: "[drm:amdgpu_dm_atomic_commit_tail [amdgpu]] *ERROR* Waiting for fences timed out!"

[Michel Dänzer]

On 2021-05-19 12:05 a.m., Alex Deucher wrote:
> On Tue, May 18, 2021 at 10:11 AM Michel Dänzer <michel at daenzer.net> wrote:
>>
>> On 2021-05-17 11:33 a.m., xgqt wrote:
>>> Hello!
>>>
>>> I run a AMD laptop "81NC Lenovo IdeaPad S340-15API" - AMD Ryzen 5 3500U with Radeon Vega 8 Graphics.
>>> Recently some breakages started happening for me. In about 1h after boot-up while using a KDE desktop machine GUI would freeze. Sometimes it would be possible to move the mouse but the rest will be frozen. Screen may start blinking or go black.
>>>
>>> I'm not sure if this is my kernel, firmware or the hardware.
>>> I don't understands dmesg that's why I'm guessing, but I think it is the firmware since this behavior started around 2021-05-15.
>>> From my Portage logs I see that I updated my firmware on 2021-05-14 at 18:16:06.
>>> So breakages started with my kernel: 5.10.27 and FW: 20210511.
>>> After breakage I jumped to a older kernel 5.4.97 and compiled 5.12.4. I didn't notice a breakage on 5.4.97 but system ran ~40 minutes.
>>> So I booted to newly compiled 5.12.4 where I was ~1h and it broke.
>>> After that I booted to 5.4.97 again and downgraded my FW.
>>> While I'm writing this I'm booted to kernel: 5.12.4 with FW: 20210315.
>>>
>>> I also described my situation on the Gentoo bugzilla: https://bugs.gentoo.org/790566
>>>
>>> "dmesg.log" attached here is from the time machine run fine (at the moment); "errors_sat_may_15_072825_pm_cest_2021.log" is a dmesg log from the time system broke
>>>
>>> Can I get any help with this? What are the next steps I should take? Any other files I should provide?
>>
>> I've hit similar hangs with a Lenovo ThinkPad E595 (Ryzen 7 3700U / Picasso / RAVEN 0x1002:0x15D8 0x17AA:0x5124 0xC1). I'm also suspecting them to be firware related. The hangs occurred with firmware from the AMD 20.50 release. I'm currently running with firmware from the 20.40 release, no hang in almost 2 weeks (the hangs happened within 1-2 days after boot).
> 
> Can you narrow down which firmware(s) cause the problem?

I'll try, but note I'm not really sure yet my hangs were related to firmware (only). Anyway, I'll try narrowing it down.


-- 
Earthling Michel Dänzer               |               https://redhat.com
Libre software enthusiast             |             Mesa and X developer