[PATCH 08/14] drm/amd/display: Fix eDP will flash when boot to OS

[Wayne Lin]

From: Brandon Syu <Brandon.Syu at amd.com>

[WHY]
With eDP DSC enabled and set 4K 60Hz, there would be screen
corruption when booting to OS or enabling the driver.

[HOW]
Avoid powering down VDD when we cannot apply eDP fast boot.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas at amd.com>
Acked-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c            | 5 ++++-
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 2910188ba514..6379b4a4757a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -6045,7 +6045,10 @@ bool is_edp_ilr_optimization_required(struct dc_link *link, struct dc_crtc_timin
 
 	req_bw = dc_bandwidth_in_kbps_from_timing(crtc_timing);
 
-	decide_edp_link_settings(link, &link_setting, req_bw);
+	if (!crtc_timing->flags.DSC)
+		decide_edp_link_settings(link, &link_setting, req_bw);
+	else
+		decide_edp_link_settings_with_dsc(link, &link_setting, req_bw, LINK_RATE_UNKNOWN);
 
 	if (link->dpcd_caps.edp_supported_link_rates[link_rate_set] != link_setting.link_rate ||
 			lane_count_set.bits.LANE_COUNT_SET != link_setting.lane_count) {
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 665cf58b0724..3d421583e9ca 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1833,7 +1833,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
 			}
 		}
 		// We are trying to enable eDP, don't power down VDD
-		if (edp_stream_num)
+		if (edp_stream_num && can_apply_edp_fast_boot)
 			keep_edp_vdd_on = true;
 	}
 
-- 
2.25.1