[PATCH v2 18/23] drm/amd/display: Fix DIG_HPD_SELECT for USB4 display endpoints

[Wayne Lin]

From: Jimmy Kizito <Jimmy.Kizito at amd.com>

[Why]
DIB_BE_CNTL<i>.DIG_HPD_SELECT selects the HPD block being used
by the display endpoint assigned to DIG<i>. In the case of USB4
display endpoints, no physical HPD block is assigned.

[How]
Setting DIB_BE_CNTL<i>.DIG_HPD_SELECT to 5 indicates that no HPD
is assigned to a display endpoint. Firmware decrements the
HPD_SELECT value by 1 before writing it to the register.

Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram at amd.com>
Acked-by: Wayne Lin <Wayne.Lin at amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito at amd.com>
---
 .../amd/display/dc/dcn31/dcn31_dio_link_encoder.c    | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c
index a5266d5999d7..8f8eee475144 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c
@@ -388,7 +388,7 @@ static bool link_dpia_control(struct dc_context *dc_ctx,
 	dc_dmub_srv_cmd_execute(dmub);
 	dc_dmub_srv_wait_idle(dmub);
 
-	return false;
+	return true;
 }
 
 static void link_encoder_disable(struct dcn10_link_encoder *enc10)
@@ -424,7 +424,10 @@ void dcn31_link_encoder_enable_dp_output(
 		dpia_control.lanenum = (uint8_t)link_settings->lane_count;
 		dpia_control.symclk_10khz = link_settings->link_rate *
 				LINK_RATE_REF_FREQ_IN_KHZ / 10;
-		dpia_control.hpdsel = 5; /* Unused by DPIA */
+		/* DIG_BE_CNTL.DIG_HPD_SELECT set to 5 (hpdsel - 1) to indicate HPD pin
+		 * unused by DPIA.
+		 */
+		dpia_control.hpdsel = 6;
 
 		if (link) {
 			dpia_control.dpia_id = link->ddc_hw_inst;
@@ -466,7 +469,10 @@ void dcn31_link_encoder_enable_dp_mst_output(
 		dpia_control.lanenum = (uint8_t)link_settings->lane_count;
 		dpia_control.symclk_10khz = link_settings->link_rate *
 				LINK_RATE_REF_FREQ_IN_KHZ / 10;
-		dpia_control.hpdsel = 5; /* Unused by DPIA */
+		/* DIG_BE_CNTL.DIG_HPD_SELECT set to 5 (hpdsel - 1) to indicate HPD pin
+		 * unused by DPIA.
+		 */
+		dpia_control.hpdsel = 6;
 
 		if (link) {
 			dpia_control.dpia_id = link->ddc_hw_inst;
-- 
2.25.1