[PATCH 3/4] drm/amdgpu: Add kernel parameter for ignoring bad page threshold

[Kent Russell]

When a GPU hits the bad_page_threshold, it will not be initialized by
the amdgpu driver. This means that the table cannot be cleared, nor can
information gathering be performed (getting serial number, BDF, etc).
Add an override called ignore_bad_page_threshold that can be set to true
to still initialize the GPU, even when the bad page threshold has been
reached.

Cc: Luben Tuikov <luben.tuikov at amd.com>
Cc: Mukul Joshi <Mukul.Joshi at amd.com>
Signed-off-by: Kent Russell <kent.russell at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h     |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index d58e37fd01f4..b85b67a88a3d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -205,6 +205,7 @@ extern struct amdgpu_mgpu_info mgpu_info;
 extern int amdgpu_ras_enable;
 extern uint amdgpu_ras_mask;
 extern int amdgpu_bad_page_threshold;
+extern bool amdgpu_ignore_bad_page_threshold;
 extern struct amdgpu_watchdog_timer amdgpu_watchdog_timer;
 extern int amdgpu_async_gfx_ring;
 extern int amdgpu_mcbp;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 96bd63aeeddd..3e9a7b072888 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -189,6 +189,7 @@ struct amdgpu_mgpu_info mgpu_info = {
 int amdgpu_ras_enable = -1;
 uint amdgpu_ras_mask = 0xffffffff;
 int amdgpu_bad_page_threshold = -1;
+bool amdgpu_ignore_bad_page_threshold;
 struct amdgpu_watchdog_timer amdgpu_watchdog_timer = {
 	.timeout_fatal_disable = false,
 	.period = 0x0, /* default to 0x0 (timeout disable) */
@@ -880,6 +881,18 @@ module_param_named(reset_method, amdgpu_reset_method, int, 0444);
 MODULE_PARM_DESC(bad_page_threshold, "Bad page threshold(-1 = auto(default value), 0 = disable bad page retirement)");
 module_param_named(bad_page_threshold, amdgpu_bad_page_threshold, int, 0444);
 
+/**
+ * DOC: ignore_bad_page_threshold (bool) Bad page threshold specifies
+ * the threshold value of faulty pages detected by RAS ECC. Once the
+ * threshold is hit, the GPU will not be initialized. Use this parameter
+ * to ignore the bad page threshold so that information gathering can
+ * still be performed. This also allows for booting the GPU to clear
+ * the RAS EEPROM table.
+ */
+
+MODULE_PARM_DESC(ignore_bad_page_threshold, "Ignore bad page threshold (false = respect bad page threshold (default value)");
+module_param_named(ignore_bad_page_threshold, amdgpu_ignore_bad_page_threshold, bool, 0644);
+
 MODULE_PARM_DESC(num_kcq, "number of kernel compute queue user want to setup (8 if set to greater than 8 or less than 0, only affect gfx 8+)");
 module_param_named(num_kcq, amdgpu_num_kcq, int, 0444);
 
-- 
2.25.1