[Intel-gfx] [RFC PATCH 1/4] drm/dp: Rename DPCD 248h according to DP 2.0 specs

[Jani Nikula]

On Wed, 20 Oct 2021, Khaled Almahallawy <khaled.almahallawy at intel.com> wrote:
> DPCD 248h name was changed from “PHY_TEST_PATTERN” in DP 1.4 to “LINK_QUAL_PATTERN_SELECT” in DP 2.0.

Please use ASCII double quotes ". Please reflow the commit message to
limit line lenghts to about 72 characters.

> Also, DPCD 248h [6:0] is the same as DPCDs 10Bh/10Ch/10Dh/10Eh [6:0]. So removed the repeated definition of PHY patterns.
>
> Reference: “DPCD 248h/10Bh/10Ch/10Dh/10Eh Name/Description Consistency”
> https://groups.vesa.org/wg/AllMem/documentComment/2738
>
> Signed-off-by: Khaled Almahallawy <khaled.almahallawy at intel.com>
> ---
>  drivers/gpu/drm/drm_dp_helper.c |  6 +++---
>  include/drm/drm_dp_helper.h     | 13 +++----------
>  2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index ada0a1ff262d..c9c928c08026 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -2489,19 +2489,19 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
>  	if (lanes & DP_ENHANCED_FRAME_CAP)
>  		data->enhanced_frame_cap = true;
>  
> -	err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
> +	err = drm_dp_dpcd_readb(aux, DP_LINK_QUAL_PATTERN_SELECT, &data->phy_pattern);
>  	if (err < 0)
>  		return err;
>  
>  	switch (data->phy_pattern) {
> -	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
> +	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
>  		err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
>  				       &data->custom80, sizeof(data->custom80));
>  		if (err < 0)
>  			return err;
>  
>  		break;
> -	case DP_PHY_TEST_PATTERN_CP2520:
> +	case DP_LINK_QUAL_PATTERN_CP2520_PAT_1:
>  		err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
>  				       &data->hbr2_reset,
>  				       sizeof(data->hbr2_reset));
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index afdf7f4183f9..ef915bb75bb4 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -862,16 +862,9 @@ struct drm_panel;
>  # define DP_TEST_CRC_SUPPORTED		    (1 << 5)
>  # define DP_TEST_COUNT_MASK		    0xf
>  
> -#define DP_PHY_TEST_PATTERN                 0x248
> -# define DP_PHY_TEST_PATTERN_SEL_MASK       0x7
> -# define DP_PHY_TEST_PATTERN_NONE           0x0
> -# define DP_PHY_TEST_PATTERN_D10_2          0x1
> -# define DP_PHY_TEST_PATTERN_ERROR_COUNT    0x2
> -# define DP_PHY_TEST_PATTERN_PRBS7          0x3
> -# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM   0x4
> -# define DP_PHY_TEST_PATTERN_CP2520         0x5
> -
> -#define DP_PHY_SQUARE_PATTERN				0x249
> +#define DP_LINK_QUAL_PATTERN_SELECT         0x248

Please add a comment here referencing where the values are. There are
examples in the file.

> +
> +#define DP_PHY_SQUARE_PATTERN               0x249
>  
>  #define DP_TEST_HBR2_SCRAMBLER_RESET        0x24A
>  #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0    0x250

-- 
Jani Nikula, Intel Open Source Graphics Center