[PATCH 1/1] drm/amdkfd: make needs_pcie_atomics FW-version dependent

[Lazar, Lijo]

[Public]

What I wanted to ask was -

Whether user mode application relies only on link properties alone to assume atomic ops are supported? If they check only link properties and if the firmware doesn't work fine, should it be still marked as supported?

Basically, what is the purpose of exposing atomic capability in link properties and whether that can be utilised by upper mode applications just based on PCIe atomics support?

Thanks,
Lijo
________________________________
From: Kuehling, Felix <Felix.Kuehling at amd.com>
Sent: Wednesday, September 1, 2021 8:24:56 PM
To: Lazar, Lijo <Lijo.Lazar at amd.com>; amd-gfx at lists.freedesktop.org <amd-gfx at lists.freedesktop.org>
Subject: Re: [PATCH 1/1] drm/amdkfd: make needs_pcie_atomics FW-version dependent

Am 2021-09-01 um 7:04 a.m. schrieb Lazar, Lijo:
>
>
> On 9/1/2021 3:26 AM, Felix Kuehling wrote:
>> On some GPUs the PCIe atomic requirement for KFD depends on the MEC
>> firmware version. Add a firmware version check for this. The minimum
>> firmware version that works without atomics can be updated in the
>> device_info structure for each GPU type.
>>
>> Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
>> ---
>>   drivers/gpu/drm/amd/amdkfd/kfd_device.c | 9 +++++++--
>>   drivers/gpu/drm/amd/amdkfd/kfd_priv.h   | 1 +
>>   2 files changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
>> b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
>> index 16a57b70cc1a..655ee5733229 100644
>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
>> @@ -688,6 +688,7 @@ struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd,
>>       struct kfd_dev *kfd;
>>       const struct kfd_device_info *device_info;
>>       const struct kfd2kgd_calls *f2g;
>> +    uint32_t fw_version;
>>         if (asic_type >= sizeof(kfd_supported_devices) / (sizeof(void
>> *) * 2)
>>           || asic_type >= sizeof(kfd2kgd_funcs) / sizeof(void *)) {
>> @@ -713,8 +714,12 @@ struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd,
>>        * supported.
>>        */
>>       kfd->pci_atomic_requested =
>> amdgpu_amdkfd_have_atomics_support(kgd);
>
> Should the check be grouped inside amdgpu_amdkfd_have_atomics_support?
>
> This flag is used for setting some link properties. If there is HW
> support but comes with incompatible firmware, should the link be still
> marked as atomic?

Our GPU HW always supports PCIe atomics (it's part of the PCIe 3 spec).
But some mainboards with older PCIe chipsets do not. Sometimes even
different ports on the same mainboard differ in their PCIe version and
atomic support.

amdgpu_device_init always tries to enable atomics on the root port an
all the bridges leading to the GPU by calling
pci_enable_atomic_ops_to_root. The result is saved in
adev->have_atomics_support, which is returned to KFD by
amdgpu_amdkfd_have_atomics_support.

The firmware change here does not affect whether atomics are
_supported_. It changes whether atomics are _required_ for the basic
operation of AQL user mode queues. The coming firmware update will
remove that requirement, which allows us to enable KFD for these GPUs+FW
on systems without PCIe atomics.

Enabling PCIe atomics with the updated FW is still beneficial because
shader programs can use a subset of atomic instructions for accessing
system memory atomically on supported systems.

Regards,
  Felix


>
> Thanks,
> Lijo
>
>> -    if (device_info->needs_pci_atomics &&
>> -        !kfd->pci_atomic_requested) {
>> +    fw_version = amdgpu_amdkfd_get_fw_version(kgd, KGD_ENGINE_MEC1);
>> +    if (!kfd->pci_atomic_requested &&
>> +        device_info->needs_pci_atomics &&
>> +        (!device_info->no_atomic_fw_version ||
>> +          amdgpu_amdkfd_get_fw_version(kgd, KGD_ENGINE_MEC1) <
>> +            device_info->no_atomic_fw_version)) {
>>           dev_info(kfd_device,
>>                "skipped device %x:%x, PCI rejects atomics\n",
>>                pdev->vendor, pdev->device);
>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
>> b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
>> index ab83b0de6b22..6d8f9bb2d905 100644
>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
>> @@ -207,6 +207,7 @@ struct kfd_device_info {
>>       bool supports_cwsr;
>>       bool needs_iommu_device;
>>       bool needs_pci_atomics;
>> +    uint32_t no_atomic_fw_version;
>>       unsigned int num_sdma_engines;
>>       unsigned int num_xgmi_sdma_engines;
>>       unsigned int num_sdma_queues_per_engine;
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20210901/86bbf87c/attachment.htm>