[PATCH v3] drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
Lang Yu
lang.yu at amd.com
Fri Sep 10 09:10:22 UTC 2021
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.
v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.
Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
"vc" - sclk voltage curve
"point" - must be 0
"sclk" - target value of sclk(MHz), should be in safe range
"vddc" - target value of vddc(mV), a 6.25(mV) stepping is
recommended and should be in safe range (the real
vddc is an approximation of target value)
echo c > pp_od_clk_voltage
"c" - commit the changes of sclk and vddc, only after
the commit command, the target values set by "vc"
command will take effect
echo r > pp_od_clk_voltage
"r" - reset sclk and vddc to default value, a subsequent
commit command is needed to take effect
Example:
1) Check default sclk and vddc
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 862mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
2) Set sclk to 1500MHz and vddc to 700mV
$ echo vc 0 1500 700 > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1500Mhz *
OD_VDDC:
0: 693mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
3) Reset sclk and vddc to default
$ echo r > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 874mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!
Signed-off-by: Lang Yu <lang.yu at amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
---
drivers/gpu/drm/amd/pm/inc/smu_types.h | 5 +-
.../amd/pm/swsmu/smu11/cyan_skillfish_ppt.c | 134 ++++++++++++++++++
2 files changed, 138 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/inc/smu_types.h b/drivers/gpu/drm/amd/pm/inc/smu_types.h
index 6f1b1b50d527..18b862a90fbe 100644
--- a/drivers/gpu/drm/amd/pm/inc/smu_types.h
+++ b/drivers/gpu/drm/amd/pm/inc/smu_types.h
@@ -226,7 +226,10 @@
__SMU_DUMMY_MAP(SetUclkDpmMode), \
__SMU_DUMMY_MAP(LightSBR), \
__SMU_DUMMY_MAP(GfxDriverResetRecovery), \
- __SMU_DUMMY_MAP(BoardPowerCalibration),
+ __SMU_DUMMY_MAP(BoardPowerCalibration), \
+ __SMU_DUMMY_MAP(RequestGfxclk), \
+ __SMU_DUMMY_MAP(ForceGfxVid), \
+ __SMU_DUMMY_MAP(UnforceGfxVid),
#undef __SMU_DUMMY_MAP
#define __SMU_DUMMY_MAP(type) SMU_MSG_##type
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c
index e1fab030cfc5..3d4c65bc29dc 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c
@@ -44,6 +44,21 @@
#undef pr_info
#undef pr_debug
+/* unit: MHz */
+#define CYAN_SKILLFISH_SCLK_MIN 1000
+#define CYAN_SKILLFISH_SCLK_MAX 2000
+#define CYAN_SKILLFISH_SCLK_DEFAULT 1800
+
+/* unit: mV */
+#define CYAN_SKILLFISH_VDDC_MIN 700
+#define CYAN_SKILLFISH_VDDC_MAX 1129
+#define CYAN_SKILLFISH_VDDC_MAGIC 5118 // 0x13fe
+
+static struct gfx_user_settings {
+ uint32_t sclk;
+ uint32_t vddc;
+} cyan_skillfish_user_settings;
+
#define FEATURE_MASK(feature) (1ULL << feature)
#define SMC_DPM_FEATURE ( \
FEATURE_MASK(FEATURE_FCLK_DPM_BIT) | \
@@ -297,6 +312,27 @@ static int cyan_skillfish_print_clk_levels(struct smu_context *smu,
smu_cmn_get_sysfs_buf(&buf, &size);
switch (clk_type) {
+ case SMU_OD_SCLK:
+ ret = cyan_skillfish_get_smu_metrics_data(smu, METRICS_CURR_GFXCLK, &cur_value);
+ if (ret)
+ return ret;
+ size += sysfs_emit_at(buf, size,"%s:\n", "OD_SCLK");
+ size += sysfs_emit_at(buf, size, "0: %uMhz *\n", cur_value);
+ break;
+ case SMU_OD_VDDC_CURVE:
+ ret = cyan_skillfish_get_smu_metrics_data(smu, METRICS_VOLTAGE_VDDGFX, &cur_value);
+ if (ret)
+ return ret;
+ size += sysfs_emit_at(buf, size,"%s:\n", "OD_VDDC");
+ size += sysfs_emit_at(buf, size, "0: %umV *\n", cur_value);
+ break;
+ case SMU_OD_RANGE:
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n",
+ CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+ size += sysfs_emit_at(buf, size, "VDDC: %7umV %10umV\n",
+ CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+ break;
case SMU_GFXCLK:
case SMU_SCLK:
case SMU_FCLK:
@@ -394,6 +430,103 @@ static ssize_t cyan_skillfish_get_gpu_metrics(struct smu_context *smu,
return sizeof(struct gpu_metrics_v2_2);
}
+static int cyan_skillfish_od_edit_dpm_table(struct smu_context *smu,
+ enum PP_OD_DPM_TABLE_COMMAND type,
+ long input[], uint32_t size)
+{
+ int ret = 0;
+ uint32_t vid;
+
+ switch (type) {
+ case PP_OD_EDIT_VDDC_CURVE:
+ if (size != 3 || input[0] != 0) {
+ dev_err(smu->adev->dev, "Invalid parameter!\n");
+ return -EINVAL;
+ }
+
+ if (input[1] <= CYAN_SKILLFISH_SCLK_MIN ||
+ input[1] > CYAN_SKILLFISH_SCLK_MAX) {
+ dev_err(smu->adev->dev, "Invalid sclk! Valid sclk range: %uMHz - %uMhz\n",
+ CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+ return -EINVAL;
+ }
+
+ if (input[2] <= CYAN_SKILLFISH_VDDC_MIN ||
+ input[2] > CYAN_SKILLFISH_VDDC_MAX) {
+ dev_err(smu->adev->dev, "Invalid vddc! Valid vddc range: %umV - %umV\n",
+ CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+ return -EINVAL;
+ }
+
+ cyan_skillfish_user_settings.sclk = input[1];
+ cyan_skillfish_user_settings.vddc = input[2];
+
+ break;
+ case PP_OD_RESTORE_DEFAULT_TABLE:
+ if (size != 0) {
+ dev_err(smu->adev->dev, "Invalid parameter!\n");
+ return -EINVAL;
+ }
+
+ cyan_skillfish_user_settings.sclk = CYAN_SKILLFISH_SCLK_DEFAULT;
+ cyan_skillfish_user_settings.vddc = CYAN_SKILLFISH_VDDC_MAGIC;
+
+ break;
+ case PP_OD_COMMIT_DPM_TABLE:
+ if (size != 0) {
+ dev_err(smu->adev->dev, "Invalid parameter!\n");
+ return -EINVAL;
+ }
+
+ if (cyan_skillfish_user_settings.sclk < CYAN_SKILLFISH_SCLK_MIN ||
+ cyan_skillfish_user_settings.sclk > CYAN_SKILLFISH_SCLK_MAX) {
+ dev_err(smu->adev->dev, "Invalid sclk! Valid sclk range: %uMHz - %uMhz\n",
+ CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+ return -EINVAL;
+ }
+
+ if ((cyan_skillfish_user_settings.vddc != CYAN_SKILLFISH_VDDC_MAGIC) &&
+ (cyan_skillfish_user_settings.vddc < CYAN_SKILLFISH_VDDC_MIN ||
+ cyan_skillfish_user_settings.vddc > CYAN_SKILLFISH_VDDC_MAX)) {
+ dev_err(smu->adev->dev, "Invalid vddc! Valid vddc range: %umV - %umV\n",
+ CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+ return -EINVAL;
+ }
+
+ ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_RequestGfxclk,
+ cyan_skillfish_user_settings.sclk, NULL);
+ if (ret) {
+ dev_err(smu->adev->dev, "Set sclk failed!\n");
+ return ret;
+ }
+
+ if (cyan_skillfish_user_settings.vddc == CYAN_SKILLFISH_VDDC_MAGIC) {
+ ret = smu_cmn_send_smc_msg(smu, SMU_MSG_UnforceGfxVid, NULL);
+ if (ret) {
+ dev_err(smu->adev->dev, "Unforce vddc failed!\n");
+ return ret;
+ }
+ } else {
+ /*
+ * PMFW accepts SVI2 VID code, convert voltage to VID:
+ * vid = (uint32_t)((1.55 - voltage) * 160.0 + 0.00001)
+ */
+ vid = (1550 - cyan_skillfish_user_settings.vddc) * 160 / 1000;
+ ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_ForceGfxVid, vid, NULL);
+ if (ret) {
+ dev_err(smu->adev->dev, "Force vddc failed!\n");
+ return ret;
+ }
+ }
+
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
static const struct pptable_funcs cyan_skillfish_ppt_funcs = {
.check_fw_status = smu_v11_0_check_fw_status,
@@ -406,6 +539,7 @@ static const struct pptable_funcs cyan_skillfish_ppt_funcs = {
.print_clk_levels = cyan_skillfish_print_clk_levels,
.is_dpm_running = cyan_skillfish_is_dpm_running,
.get_gpu_metrics = cyan_skillfish_get_gpu_metrics,
+ .od_edit_dpm_table = cyan_skillfish_od_edit_dpm_table,
.register_irq_handler = smu_v11_0_register_irq_handler,
.notify_memory_pool_location = smu_v11_0_notify_memory_pool_location,
.send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param,
--
2.25.1
More information about the amd-gfx
mailing list