[PATCH 09/20] drm/amd/display: Power down hardware if timer not trigger

Pavle Kotarac Pavle.Kotarac at amd.com
Fri Apr 8 17:19:00 UTC 2022


From: Paul Hsieh <paul.hsieh at amd.com>

[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.

[HOW]
1. If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.
2. Update HDMI hang w/a to apply to all TMDS signals on
headless system

Reviewed-by: Martin Leung <Martin.Leung at amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac at amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh at amd.com>
---
 .../amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 17 +++++++++---
 .../display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c  | 26 ++++++++++++++++++-
 2 files changed, 39 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index f4dee0e48a67..02943ca65807 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -88,11 +88,22 @@ static int rn_get_active_display_cnt_wa(struct dc *dc, struct dc_state *context)
 
 static void rn_set_low_power_state(struct clk_mgr *clk_mgr_base)
 {
+	int display_count;
 	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct dc *dc = clk_mgr_base->ctx->dc;
+	struct dc_state *context = dc->current_state;
+
+	if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_LOW_POWER) {
+
+		display_count = rn_get_active_display_cnt_wa(dc, context);
 
-	rn_vbios_smu_set_dcn_low_power_state(clk_mgr, DCN_PWR_STATE_LOW_POWER);
-	/* update power state */
-	clk_mgr_base->clks.pwr_state = DCN_PWR_STATE_LOW_POWER;
+		/* if we can go lower, go lower */
+		if (display_count == 0) {
+			rn_vbios_smu_set_dcn_low_power_state(clk_mgr, DCN_PWR_STATE_LOW_POWER);
+			/* update power state */
+			clk_mgr_base->clks.pwr_state = DCN_PWR_STATE_LOW_POWER;
+		}
+	}
 }
 
 static void rn_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
index 59fdd7f0d609..969b40250434 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
@@ -615,13 +615,37 @@ static void dcn31_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk
 	}
 }
 
+void dcn31_set_low_power_state(struct clk_mgr *clk_mgr_base)
+{
+	int display_count;
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct dc *dc = clk_mgr_base->ctx->dc;
+	struct dc_state *context = dc->current_state;
+
+	if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_LOW_POWER) {
+		display_count = dcn31_get_active_display_cnt_wa(dc, context);
+		/* if we can go lower, go lower */
+		if (display_count == 0) {
+			union display_idle_optimization_u idle_info = { 0 };
+
+			idle_info.idle_info.df_request_disabled = 1;
+			idle_info.idle_info.phy_ref_clk_off = 1;
+			idle_info.idle_info.s0i2_rdy = 1;
+			dcn31_smu_set_display_idle_optimization(clk_mgr, idle_info.data);
+			/* update power state */
+			clk_mgr_base->clks.pwr_state = DCN_PWR_STATE_LOW_POWER;
+		}
+	}
+}
+
 static struct clk_mgr_funcs dcn31_funcs = {
 	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
 	.update_clocks = dcn31_update_clocks,
 	.init_clocks = dcn31_init_clocks,
 	.enable_pme_wa = dcn31_enable_pme_wa,
 	.are_clock_states_equal = dcn31_are_clock_states_equal,
-	.notify_wm_ranges = dcn31_notify_wm_ranges
+	.notify_wm_ranges = dcn31_notify_wm_ranges,
+	.set_low_power_state = dcn31_set_low_power_state
 };
 extern struct clk_mgr_funcs dcn3_fpga_funcs;
 
-- 
2.32.0



More information about the amd-gfx mailing list