[PATCH] drm/amdgpu: disable runtime pm on several sienna cichlid cards
Chen, Guchun
Guchun.Chen at amd.com
Wed Apr 27 10:22:23 UTC 2022
Sure, will update it in v2.
Regards,
Guchun
-----Original Message-----
From: Lazar, Lijo <Lijo.Lazar at amd.com>
Sent: Wednesday, April 27, 2022 6:16 PM
To: Chen, Guchun <Guchun.Chen at amd.com>; amd-gfx at lists.freedesktop.org; Koenig, Christian <Christian.Koenig at amd.com>; Zhang, Hawking <Hawking.Zhang at amd.com>; Deucher, Alexander <Alexander.Deucher at amd.com>; Quan, Evan <Evan.Quan at amd.com>
Subject: Re: [PATCH] drm/amdgpu: disable runtime pm on several sienna cichlid cards
On 4/27/2022 3:41 PM, Guchun Chen wrote:
> Disable runtime power management on several sienna cichlid cards,
> otherwise SMU will possibly fail to be resumed from runtime suspend.
> Will drop this after a clean solution between kernel driver and SMU FW
> is available.
>
> amdgpu 0000:63:00.0: amdgpu: GECC is enabled amdgpu 0000:63:00.0:
> amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available amdgpu
> 0000:63:00.0: amdgpu: SMU is resuming...
> amdgpu 0000:63:00.0: amdgpu: SMU: I'm not done with your command:
> SMN_C2PMSG_66:0x0000000E SMN_C2PMSG_82:0x00000080 amdgpu 0000:63:00.0: amdgpu: Failed to SetDriverDramAddr!
> amdgpu 0000:63:00.0: amdgpu: Failed to setup smc hw!
> [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP
> block <smu> failed -62 amdgpu 0000:63:00.0: amdgpu:
> amdgpu_device_ip_resume failed (-62)
>
> Signed-off-by: Guchun Chen <guchun.chen at amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> index 262938f0dfdb..9c483787c0ca 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> @@ -180,6 +180,15 @@ int amdgpu_driver_load_kms(struct amdgpu_device *adev, unsigned long flags)
> */
> if (adev->is_fw_fb)
> adev->runpm = false;
> +
> + /*
> + * Add below quirk on several sienna_cichlid cards to disable
> + * runtime pm to fix EMI failures.
> + */
> + if (((adev->pdev->device == 0x73A1) && (adev->pdev->revision == 0x00)) ||
> + ((adev->pdev->device == 0x73BF) && (adev->pdev->revision == 0xCF)))
> + adev->runpm = false;
> +
Separate to amdgpu_runtime_pm_quirk()?
Thanks,
Lijo
> if (adev->runpm)
> dev_info(adev->dev, "Using BACO for runtime pm\n");
> }
>
More information about the amd-gfx
mailing list