[PATCH] drm/amdgpu: disable runtime pm on several sienna cichlid cards(v2)
Quan, Evan
Evan.Quan at amd.com
Wed Apr 27 11:42:45 UTC 2022
[AMD Official Use Only - General]
> -----Original Message-----
> From: Chen, Guchun <Guchun.Chen at amd.com>
> Sent: Wednesday, April 27, 2022 6:27 PM
> To: amd-gfx at lists.freedesktop.org; Koenig, Christian
> <Christian.Koenig at amd.com>; Zhang, Hawking <Hawking.Zhang at amd.com>;
> Deucher, Alexander <Alexander.Deucher at amd.com>; Lazar, Lijo
> <Lijo.Lazar at amd.com>; Quan, Evan <Evan.Quan at amd.com>
> Cc: Chen, Guchun <Guchun.Chen at amd.com>
> Subject: [PATCH] drm/amdgpu: disable runtime pm on several sienna cichlid
> cards(v2)
>
> Disable runtime power management on several sienna cichlid
> cards, otherwise SMU will possibly fail to be resumed from
> runtime suspend. Will drop this after a clean solution between
> kernel driver and SMU FW is available.
>
> amdgpu 0000:63:00.0: amdgpu: GECC is enabled
> amdgpu 0000:63:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is
> not available
> amdgpu 0000:63:00.0: amdgpu: SMU is resuming...
> amdgpu 0000:63:00.0: amdgpu: SMU: I'm not done with your command:
> SMN_C2PMSG_66:0x0000000E SMN_C2PMSG_82:0x00000080
> amdgpu 0000:63:00.0: amdgpu: Failed to SetDriverDramAddr!
> amdgpu 0000:63:00.0: amdgpu: Failed to setup smc hw!
> [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP
> block <smu> failed -62
> amdgpu 0000:63:00.0: amdgpu: amdgpu_device_ip_resume failed (-62)
>
> v2: seperate to a function.
>
> Signed-off-by: Guchun Chen <guchun.chen at amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> index 262938f0dfdb..1bf8ff71b6b5 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
> @@ -43,6 +43,17 @@
> #include "amdgpu_display.h"
> #include "amdgpu_ras.h"
>
> +static void amdgpu_runtime_pm_quirk(struct amdgpu_device *adev)
> +{
> + /*
> + * Add below quirk on several sienna_cichlid cards to disable
> + * runtime pm to fix EMI failures.
> + */
> + if (((adev->pdev->device == 0x73A1) && (adev->pdev->revision ==
> 0x00)) ||
> + ((adev->pdev->device == 0x73BF) && (adev->pdev->revision ==
> 0xCF)))
> + adev->runpm = false;
> +}
> +
[Quan, Evan] Better to move this to sienna_cichlid_check_bxco_support(). As long as smu_baco->platform_support is set as false there,
the runpm will be disabled accordingly I think.
Either way the patch is reviewed-by: Evan Quan <evan.quan at amd.com>
BR
Evan
> void amdgpu_unregister_gpu_instance(struct amdgpu_device *adev)
> {
> struct amdgpu_gpu_instance *gpu_instance;
> @@ -180,6 +191,9 @@ int amdgpu_driver_load_kms(struct amdgpu_device
> *adev, unsigned long flags)
> */
> if (adev->is_fw_fb)
> adev->runpm = false;
> +
> + amdgpu_runtime_pm_quirk(adev);
> +
> if (adev->runpm)
> dev_info(adev->dev, "Using BACO for runtime
> pm\n");
> }
> --
> 2.17.1
More information about the amd-gfx
mailing list