[PATCH v4] drm/amdgpu: Ensure the DMA engine is deactivated during set ups

Lang Yu Lang.Yu at amd.com
Thu Apr 28 14:05:41 UTC 2022


On 04/28/ , Haohui Mai wrote:
> If I understand correctly, the original code will disable the HALT bit
> of the register mmSDMA0_F32_CNTL twice on other code paths -- one in
> the sdma_v5_2_ctx_switch_enable() and the other one in
> sdma_v5_2_enable().
> 
> The change ensures that the bit is only disabled once. Just wondering,
> which one is the expected behavior?
> 
> ~Haohui

The HALT bit of the register mmSDMA0_F32_CNTL is not set/reset in original sdma_v5_2_ctx_switch_enable()
(https://gitlab.freedesktop.org/agd5f/linux/-/blob/amd-staging-drm-next/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c#L523)

Regards,
Lang

> On Thu, Apr 28, 2022 at 6:27 PM Lang Yu <Lang.Yu at amd.com> wrote:
> >
> > On 04/28/ , ricetons at gmail.com wrote:
> > > From: Haohui Mai <ricetons at gmail.com>
> > >
> > > The patch fully deactivates the DMA engine before setting up the ring
> > > buffer to avoid potential data races and crashes.
> > >
> > > The v4 patch addresses the comments from Lang Yu <Lang.Yu at amd.com>.
> > >
> > > Signed-off-by: Haohui Mai <ricetons at gmail.com>
> > > ---
> > >  drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 113 ++++++++++++++-----------
> > >  1 file changed, 62 insertions(+), 51 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
> > > index 013d2dec81d0..b000117b77d0 100644
> > > --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
> > > +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
> > > @@ -459,7 +459,6 @@ static void sdma_v5_2_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 se
> > >       }
> > >  }
> > >
> > > -
> > >  /**
> > >   * sdma_v5_2_gfx_stop - stop the gfx async dma engines
> > >   *
> > > @@ -505,17 +504,21 @@ static void sdma_v5_2_rlc_stop(struct amdgpu_device *adev)
> > >  }
> > >
> > >  /**
> > > - * sdma_v5_2_ctx_switch_enable - stop the async dma engines context switch
> > > + * sdma_v5_2_ctx_switch_enable_for_instance - start the async dma engines
> > > + * context switch for an instance
> > >   *
> > >   * @adev: amdgpu_device pointer
> > > - * @enable: enable/disable the DMA MEs context switch.
> > > + * @instance_idx: the index of the SDMA instance
> > >   *
> > > - * Halt or unhalt the async dma engines context switch.
> > > + * Unhalt the async dma engines context switch.
> > >   */
> > > -static void sdma_v5_2_ctx_switch_enable(struct amdgpu_device *adev, bool enable)
> > > +static void sdma_v5_2_ctx_switch_enable_for_instance(struct amdgpu_device *adev, int instance_idx)
> > >  {
> > >       u32 f32_cntl, phase_quantum = 0;
> > > -     int i;
> > > +
> > > +     if (WARN_ON(instance_idx >= adev->sdma.num_instances)) {
> > > +             return;
> > > +     }
> > >
> > >       if (amdgpu_sdma_phase_quantum) {
> > >               unsigned value = amdgpu_sdma_phase_quantum;
> > > @@ -539,61 +542,71 @@ static void sdma_v5_2_ctx_switch_enable(struct amdgpu_device *adev, bool enable)
> > >               phase_quantum =
> > >                       value << SDMA0_PHASE0_QUANTUM__VALUE__SHIFT |
> > >                       unit  << SDMA0_PHASE0_QUANTUM__UNIT__SHIFT;
> > > -     }
> > > -
> > > -     for (i = 0; i < adev->sdma.num_instances; i++) {
> > > -             if (enable && amdgpu_sdma_phase_quantum) {
> > > -                     WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE0_QUANTUM),
> > > -                            phase_quantum);
> > > -                     WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE1_QUANTUM),
> > > -                            phase_quantum);
> > > -                     WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE2_QUANTUM),
> > > -                            phase_quantum);
> > > -             }
> > >
> > > -             if (!amdgpu_sriov_vf(adev)) {
> > > -                     f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL));
> > > -                     f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL,
> > > -                                     AUTO_CTXSW_ENABLE, enable ? 1 : 0);
> > > -                     WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl);
> > > -             }
> > > +             WREG32_SOC15_IP(GC,
> > > +                     sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE0_QUANTUM),
> > > +                     phase_quantum);
> > > +             WREG32_SOC15_IP(GC,
> > > +                     sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE1_QUANTUM),
> > > +                 phase_quantum);
> > > +             WREG32_SOC15_IP(GC,
> > > +                     sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE2_QUANTUM),
> > > +                 phase_quantum);
> > >       }
> > >
> > > +     if (!amdgpu_sriov_vf(adev)) {
> > > +             f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_CNTL));
> > > +             f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL,
> > > +                             AUTO_CTXSW_ENABLE, 1);
> > > +             WREG32(sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_CNTL), f32_cntl);
> > > +     }
> > >  }
> > >
> > >  /**
> > > - * sdma_v5_2_enable - stop the async dma engines
> > > + * sdma_v5_2_ctx_switch_disable_all - stop the async dma engines context switch
> > >   *
> > >   * @adev: amdgpu_device pointer
> > > - * @enable: enable/disable the DMA MEs.
> > >   *
> > > - * Halt or unhalt the async dma engines.
> > > + * Halt the async dma engines context switch.
> > >   */
> > > -static void sdma_v5_2_enable(struct amdgpu_device *adev, bool enable)
> > > +static void sdma_v5_2_ctx_switch_disable_all(struct amdgpu_device *adev)
> > >  {
> > >       u32 f32_cntl;
> > >       int i;
> > >
> > > -     if (!enable) {
> > > -             sdma_v5_2_gfx_stop(adev);
> > > -             sdma_v5_2_rlc_stop(adev);
> > > -     }
> > > +     if (amdgpu_sriov_vf(adev))
> > > +             return;
> > >
> > > -     if (!amdgpu_sriov_vf(adev)) {
> > > -             for (i = 0; i < adev->sdma.num_instances; i++) {
> > > -                     f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL));
> > > -                     f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_F32_CNTL, HALT, enable ? 0 : 1);
> > > -                     WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL), f32_cntl);
> > > -             }
> > > +     for (i = 0; i < adev->sdma.num_instances; i++) {
> > > +             f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL));
> > > +             f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL,
> > > +                             AUTO_CTXSW_ENABLE, 0);
> > > +             WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl);
> > >       }
> > >  }
> > >
> > > +/**
> > > + * sdma_v5_2_halt - stop the async dma engines
> > > + *
> > > + * @adev: amdgpu_device pointer
> > > + *
> > > + * Halt the async dma engines.
> > > + */
> > > +static void sdma_v5_2_halt(struct amdgpu_device *adev)
> > > +{
> > > +     sdma_v5_2_gfx_stop(adev);
> > > +     sdma_v5_2_rlc_stop(adev);
> > > +}
> > > +
> > >  /**
> > >   * sdma_v5_2_gfx_resume - setup and start the async dma engines
> > >   *
> > >   * @adev: amdgpu_device pointer
> > >   *
> > >   * Set up the gfx DMA ring buffers and enable them.
> > > + * It assumes that the dma engine is stopped for each instance.
> > > + * The function enables the engine and preemptions sequentially for each instance.
> > > + *
> > >   * Returns 0 for success, error for failure.
> > >   */
> > >  static int sdma_v5_2_gfx_resume(struct amdgpu_device *adev)
> > > @@ -737,10 +750,7 @@ static int sdma_v5_2_gfx_resume(struct amdgpu_device *adev)
> > >
> > >               ring->sched.ready = true;
> > >
> > > -             if (amdgpu_sriov_vf(adev)) { /* bare-metal sequence doesn't need below to lines */
> > > -                     sdma_v5_2_ctx_switch_enable(adev, true);
> > > -                     sdma_v5_2_enable(adev, true);
> > > -             }
> > > +             sdma_v5_2_ctx_switch_enable_for_instance(adev, i);
> > >
> > >               r = amdgpu_ring_test_ring(ring);
> > >               if (r) {
> > > @@ -784,7 +794,7 @@ static int sdma_v5_2_load_microcode(struct amdgpu_device *adev)
> > >       int i, j;
> > >
> > >       /* halt the MEs */
> > > -     sdma_v5_2_enable(adev, false);
> > > +     sdma_v5_2_halt(adev);
> > >
> > >       for (i = 0; i < adev->sdma.num_instances; i++) {
> > >               if (!adev->sdma.instance[i].fw)
> > > @@ -856,8 +866,8 @@ static int sdma_v5_2_start(struct amdgpu_device *adev)
> > >       int r = 0;
> > >
> > >       if (amdgpu_sriov_vf(adev)) {
> > > -             sdma_v5_2_ctx_switch_enable(adev, false);
> > > -             sdma_v5_2_enable(adev, false);
> > > +             sdma_v5_2_ctx_switch_disable_all(adev);
> > > +             sdma_v5_2_halt(adev);
> > >
> > >               /* set RB registers */
> > >               r = sdma_v5_2_gfx_resume(adev);
> > > @@ -865,6 +875,9 @@ static int sdma_v5_2_start(struct amdgpu_device *adev)
> > >       }
> > >
> > >       if (adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT) {
> > > +             sdma_v5_2_ctx_switch_disable_all(adev);
> > > +             sdma_v5_2_halt(adev);
> >
> > You don't need call these functions here.
> >
> > In original code, you can see sdma_v5_2_load_microcode() calls
> > sdma_v5_2_enable(adev, false) to halt the engine before load ucode.
> >
> > What I mean is sdma_v5_2_halt(adev) should have no functional change with
> > original sdma_v5_2_enable(adev, false), like this,
> >
> > static void sdma_v5_2_halt(struct amdgpu_device *adev) {
> >         u32 f32_cntl;
> >         int i;
> >
> >         sdma_v5_2_gfx_stop(adev);
> >         sdma_v5_2_rlc_stop(adev);
> >
> >         if (!amdgpu_sriov_vf(adev)) {
> >                 for (i = 0; i < adev->sdma.num_instances; i++) {
> >                         f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL));
> >                         f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_F32_CNTL, HALT, 1);
> >                         WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL), f32_cntl);
> >                 }
> >         }
> > }
> >
> > But you remove the codes to set the HLAT bit of register mmSDMA0_F32_CNTL.
> >
> > Regards,
> > Lang
> >
> > >               r = sdma_v5_2_load_microcode(adev);
> > >               if (r)
> > >                       return r;
> > > @@ -881,12 +894,10 @@ static int sdma_v5_2_start(struct amdgpu_device *adev)
> > >               amdgpu_gfx_off_ctrl(adev, false);
> > >
> > >       sdma_v5_2_soft_reset(adev);
> > > -     /* unhalt the MEs */
> > > -     sdma_v5_2_enable(adev, true);
> > > -     /* enable sdma ring preemption */
> > > -     sdma_v5_2_ctx_switch_enable(adev, true);
> > >
> > > -     /* start the gfx rings and rlc compute queues */
> > > +     /* Soft reset supposes to disable the dma engine and preemption.
> > > +      * Now start the gfx rings and rlc compute queues.
> > > +      */
> > >       r = sdma_v5_2_gfx_resume(adev);
> > >       if (adev->in_s0ix)
> > >               amdgpu_gfx_off_ctrl(adev, true);
> > > @@ -1340,8 +1351,8 @@ static int sdma_v5_2_hw_fini(void *handle)
> > >       if (amdgpu_sriov_vf(adev))
> > >               return 0;
> > >
> > > -     sdma_v5_2_ctx_switch_enable(adev, false);
> > > -     sdma_v5_2_enable(adev, false);
> > > +     sdma_v5_2_ctx_switch_disable_all(adev);
> > > +     sdma_v5_2_halt(adev);
> > >
> > >       return 0;
> > >  }
> > > --
> > > 2.25.1
> > >


More information about the amd-gfx mailing list