[PATCH 21/32] drm/amd/display: Allow alternate prefetch modes in DML for DCN32

[Tom Chung]

From: David Galiffi <David.Galiffi at amd.com>

[Why]
Driver is restricting voltage levels if system cannot switch
in vblank.

[How]
Change allow_for_pstate_or_stutter_in_vblank_final from
dm_prefetch_support_uclk_fclk_and_stutter to
dm_prefetch_support_uclk_fclk_and_stutter_if_possible.
Add support for a new registry property,
DalDMLDisallowAlternatePrefetchModes, for easier debugging.

Reviewed-by: Alvin Lee <alvin.lee2 at amd.com>
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Tom Chung <chiahsuan.chung at amd.com>
Signed-off-by: David Galiffi <David.Galiffi at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h           |  1 +
 .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c  | 34 +++++++++++++------
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 07feb8551436..86fe4b9f10c2 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -788,6 +788,7 @@ struct dc_debug_options {
 	uint32_t mst_start_top_delay;
 	uint8_t psr_power_use_phy_fsm;
 	enum dml_hostvm_override_opts dml_hostvm_override;
+	bool dml_disallow_alternate_prefetch_modes;
 	bool use_legacy_soc_bb_mechanism;
 	bool exit_idle_opt_for_cursor_updates;
 	bool enable_single_display_2to1_odm_policy;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 988e28a8e90e..85ecd94e2a4a 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -986,9 +986,15 @@ static void dcn32_full_validate_bw_helper(struct dc *dc,
 	 * DML favors voltage over p-state, but we're more interested in
 	 * supporting p-state over voltage. We can't support p-state in
 	 * prefetch mode > 0 so try capping the prefetch mode to start.
+	 * Override present for testing.
 	 */
-	context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
+	if (dc->debug.dml_disallow_alternate_prefetch_modes)
+		context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
 			dm_prefetch_support_uclk_fclk_and_stutter;
+	else
+		context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
+			dm_prefetch_support_uclk_fclk_and_stutter_if_possible;
+
 	*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
 	/* This may adjust vlevel and maxMpcComb */
 	if (*vlevel < context->bw_ctx.dml.soc.num_states)
@@ -1017,7 +1023,9 @@ static void dcn32_full_validate_bw_helper(struct dc *dc,
 			 * will not allow for switch in VBLANK. The DRR display must have it's VBLANK stretched
 			 * enough to support MCLK switching.
 			 */
-			if (*vlevel == context->bw_ctx.dml.soc.num_states) {
+			if (*vlevel == context->bw_ctx.dml.soc.num_states &&
+				context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final ==
+					dm_prefetch_support_uclk_fclk_and_stutter) {
 				context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
 								dm_prefetch_support_stutter;
 				/* There are params (such as FabricClock) that need to be recalculated
@@ -1347,7 +1355,8 @@ bool dcn32_internal_validate_bw(struct dc *dc,
 	int split[MAX_PIPES] = { 0 };
 	bool merge[MAX_PIPES] = { false };
 	bool newly_split[MAX_PIPES] = { false };
-	int pipe_cnt, i, pipe_idx, vlevel;
+	int pipe_cnt, i, pipe_idx;
+	int vlevel = context->bw_ctx.dml.soc.num_states;
 	struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
 
 	dc_assert_fp_enabled();
@@ -1376,17 +1385,22 @@ bool dcn32_internal_validate_bw(struct dc *dc,
 		DC_FP_END();
 	}
 
-	if (fast_validate || vlevel == context->bw_ctx.dml.soc.num_states ||
-			vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) {
+	if (fast_validate ||
+			dc->debug.dml_disallow_alternate_prefetch_modes &&
+			(vlevel == context->bw_ctx.dml.soc.num_states ||
+				vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported)) {
 		/*
-		 * If mode is unsupported or there's still no p-state support then
-		 * fall back to favoring voltage.
+		 * If dml_disallow_alternate_prefetch_modes is false, then we have already
+		 * tried alternate prefetch modes during full validation.
+		 *
+		 * If mode is unsupported or there is no p-state support, then
+		 * fall back to favouring voltage.
 		 *
-		 * If Prefetch mode 0 failed for this config, or passed with Max UCLK, try if
-		 * supported with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2)
+		 * If Prefetch mode 0 failed for this config, or passed with Max UCLK, then try
+		 * to support with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2)
 		 */
 		context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
-				dm_prefetch_support_fclk_and_stutter;
+			dm_prefetch_support_fclk_and_stutter;
 
 		vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt);
 
-- 
2.25.1