[PATCH v2] drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
Rodrigo Siqueira
Rodrigo.Siqueira at amd.com
Thu Aug 11 19:56:19 UTC 2022
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Changes since V1:
- Drop optc3_fpu_set_vrr_m_const since it is unused.
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: Melissa Wen <mwen at igalia.com>
Cc: Maíra Canal <mairacanal at riseup.net>
Reported-by: Stephen Rothwell <sfr at canb.auug.org.au>
Reported-by: Michael Ellerman <mpe at ellerman.id.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
.../gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 8 --
.../gpu/drm/amd/display/dc/dcn30/dcn30_optc.h | 3 -
.../gpu/drm/amd/display/dc/dcn32/dcn32_optc.c | 1 -
.../drm/amd/display/dc/dml/dcn30/dcn30_fpu.c | 77 -------------------
.../drm/amd/display/dc/dml/dcn30/dcn30_fpu.h | 3 -
.../amd/display/dc/inc/hw/timing_generator.h | 2 -
6 files changed, 94 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index d072997477dd..1782b9c26cf4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -184,14 +184,6 @@ void optc3_set_dsc_config(struct timing_generator *optc,
REG_UPDATE(OTG_V_SYNC_A_CNTL, OTG_V_SYNC_MODE, 0);
}
-void optc3_set_vrr_m_const(struct timing_generator *optc,
- double vtotal_avg)
-{
- DC_FP_START();
- optc3_fpu_set_vrr_m_const(optc, vtotal_avg);
- DC_FP_END();
-}
-
void optc3_set_odm_bypass(struct timing_generator *optc,
const struct dc_crtc_timing *dc_crtc_timing)
{
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
index 33bd12f5dc17..dd45a5499b07 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
@@ -329,9 +329,6 @@ void optc3_lock_doublebuffer_enable(struct timing_generator *optc);
void optc3_lock_doublebuffer_disable(struct timing_generator *optc);
-void optc3_set_vrr_m_const(struct timing_generator *optc,
- double vtotal_avg);
-
void optc3_set_drr_trigger_window(struct timing_generator *optc,
uint32_t window_start, uint32_t window_end);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
index 9861be1dc063..1fad7b48bd5b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
@@ -281,7 +281,6 @@ static struct timing_generator_funcs dcn32_tg_funcs = {
.lock_doublebuffer_enable = optc3_lock_doublebuffer_enable,
.lock_doublebuffer_disable = optc3_lock_doublebuffer_disable,
.enable_optc_clock = optc1_enable_optc_clock,
- .set_vrr_m_const = optc3_set_vrr_m_const,
.set_drr = optc32_set_drr,
.get_last_used_drr_vtotal = optc2_get_last_used_drr_vtotal,
.set_vtotal_min_max = optc3_set_vtotal_min_max,
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
index e1e92daba668..814374b1016c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
@@ -177,83 +177,6 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_0_soc = {
.urgent_latency_adjustment_fabric_clock_reference_mhz = 1000,
};
-
-void optc3_fpu_set_vrr_m_const(struct timing_generator *optc,
- double vtotal_avg)
-{
- struct optc *optc1 = DCN10TG_FROM_TG(optc);
- double vtotal_min, vtotal_max;
- double ratio, modulo, phase;
- uint32_t vblank_start;
- uint32_t v_total_mask_value = 0;
-
- dc_assert_fp_enabled();
-
- /* Compute VTOTAL_MIN and VTOTAL_MAX, so that
- * VOTAL_MAX - VTOTAL_MIN = 1
- */
- v_total_mask_value = 16;
- vtotal_min = dcn_bw_floor(vtotal_avg);
- vtotal_max = dcn_bw_ceil(vtotal_avg);
-
- /* Check that bottom VBLANK is at least 2 lines tall when running with
- * VTOTAL_MIN. Note that VTOTAL registers are defined as 'total number
- * of lines in a frame - 1'.
- */
- REG_GET(OTG_V_BLANK_START_END, OTG_V_BLANK_START,
- &vblank_start);
- ASSERT(vtotal_min >= vblank_start + 1);
-
- /* Special case where the average frame rate can be achieved
- * without using the DTO
- */
- if (vtotal_min == vtotal_max) {
- REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL, (uint32_t)vtotal_min);
-
- optc->funcs->set_vtotal_min_max(optc, 0, 0);
- REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, 0);
- REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, 0);
- REG_UPDATE_3(OTG_V_TOTAL_CONTROL,
- OTG_V_TOTAL_MIN_SEL, 0,
- OTG_V_TOTAL_MAX_SEL, 0,
- OTG_SET_V_TOTAL_MIN_MASK_EN, 0);
- return;
- }
-
- ratio = vtotal_max - vtotal_avg;
- modulo = 65536.0 * 65536.0 - 1.0; /* 2^32 - 1 */
- phase = ratio * modulo;
-
- /* Special cases where the DTO phase gets rounded to 0 or
- * to DTO modulo
- */
- if (phase <= 0 || phase >= modulo) {
- REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL,
- phase <= 0 ?
- (uint32_t)vtotal_max : (uint32_t)vtotal_min);
- REG_SET(OTG_V_TOTAL_MIN, 0, OTG_V_TOTAL_MIN, 0);
- REG_SET(OTG_V_TOTAL_MAX, 0, OTG_V_TOTAL_MAX, 0);
- REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, 0);
- REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, 0);
- REG_UPDATE_3(OTG_V_TOTAL_CONTROL,
- OTG_V_TOTAL_MIN_SEL, 0,
- OTG_V_TOTAL_MAX_SEL, 0,
- OTG_SET_V_TOTAL_MIN_MASK_EN, 0);
- return;
- }
- REG_UPDATE_6(OTG_V_TOTAL_CONTROL,
- OTG_V_TOTAL_MIN_SEL, 1,
- OTG_V_TOTAL_MAX_SEL, 1,
- OTG_SET_V_TOTAL_MIN_MASK_EN, 1,
- OTG_SET_V_TOTAL_MIN_MASK, v_total_mask_value,
- OTG_VTOTAL_MID_REPLACING_MIN_EN, 0,
- OTG_VTOTAL_MID_REPLACING_MAX_EN, 0);
- REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL, (uint32_t)vtotal_min);
- optc->funcs->set_vtotal_min_max(optc, vtotal_min, vtotal_max);
- REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, (uint32_t)phase);
- REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, (uint32_t)modulo);
-}
-
void dcn30_fpu_populate_dml_writeback_from_context(
struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes)
{
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
index cab864095ce7..e3b6ad6a8784 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
@@ -29,9 +29,6 @@
#include "core_types.h"
#include "dcn20/dcn20_optc.h"
-void optc3_fpu_set_vrr_m_const(struct timing_generator *optc,
- double vtotal_avg);
-
void dcn30_fpu_populate_dml_writeback_from_context(
struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes);
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 828e5c6ad1cf..72eef7a5ed83 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -310,8 +310,6 @@ struct timing_generator_funcs {
int group_idx,
uint32_t gsl_ready_signal);
void (*set_out_mux)(struct timing_generator *tg, enum otg_out_mux_dest dest);
- void (*set_vrr_m_const)(struct timing_generator *optc,
- double vtotal_avg);
void (*set_drr_trigger_window)(struct timing_generator *optc,
uint32_t window_start, uint32_t window_end);
void (*set_vtotal_change_limit)(struct timing_generator *optc,
--
2.35.1
More information about the amd-gfx
mailing list