[PATCH] drm/amd/display: Drop unused code

Alex Deucher alexdeucher at gmail.com
Fri Aug 12 16:50:44 UTC 2022


On Thu, Aug 11, 2022 at 6:36 PM Rodrigo Siqueira
<Rodrigo.Siqueira at amd.com> wrote:
>
> After removing some code for fixing the PowerPC compilation, we had some
> leftover functions that are not used anymore. This commit drops
> optc3_fpu_set_vrr_m_const since we don't need it anymore.
>
> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>

Reviewed-by: Alex Deucher <alexander.deucher at amd.com>

> ---
>  .../drm/amd/display/dc/dml/dcn30/dcn30_fpu.c  | 77 -------------------
>  .../drm/amd/display/dc/dml/dcn30/dcn30_fpu.h  |  3 -
>  2 files changed, 80 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
> index e1e92daba668..814374b1016c 100644
> --- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
> +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
> @@ -177,83 +177,6 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_0_soc = {
>         .urgent_latency_adjustment_fabric_clock_reference_mhz = 1000,
>  };
>
> -
> -void optc3_fpu_set_vrr_m_const(struct timing_generator *optc,
> -               double vtotal_avg)
> -{
> -       struct optc *optc1 = DCN10TG_FROM_TG(optc);
> -       double vtotal_min, vtotal_max;
> -       double ratio, modulo, phase;
> -       uint32_t vblank_start;
> -       uint32_t v_total_mask_value = 0;
> -
> -       dc_assert_fp_enabled();
> -
> -       /* Compute VTOTAL_MIN and VTOTAL_MAX, so that
> -        * VOTAL_MAX - VTOTAL_MIN = 1
> -        */
> -       v_total_mask_value = 16;
> -       vtotal_min = dcn_bw_floor(vtotal_avg);
> -       vtotal_max = dcn_bw_ceil(vtotal_avg);
> -
> -       /* Check that bottom VBLANK is at least 2 lines tall when running with
> -        * VTOTAL_MIN. Note that VTOTAL registers are defined as 'total number
> -        * of lines in a frame - 1'.
> -        */
> -       REG_GET(OTG_V_BLANK_START_END, OTG_V_BLANK_START,
> -               &vblank_start);
> -       ASSERT(vtotal_min >= vblank_start + 1);
> -
> -       /* Special case where the average frame rate can be achieved
> -        * without using the DTO
> -        */
> -       if (vtotal_min == vtotal_max) {
> -               REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL, (uint32_t)vtotal_min);
> -
> -               optc->funcs->set_vtotal_min_max(optc, 0, 0);
> -               REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, 0);
> -               REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, 0);
> -               REG_UPDATE_3(OTG_V_TOTAL_CONTROL,
> -                       OTG_V_TOTAL_MIN_SEL, 0,
> -                       OTG_V_TOTAL_MAX_SEL, 0,
> -                       OTG_SET_V_TOTAL_MIN_MASK_EN, 0);
> -               return;
> -       }
> -
> -       ratio = vtotal_max - vtotal_avg;
> -       modulo = 65536.0 * 65536.0 - 1.0; /* 2^32 - 1 */
> -       phase = ratio * modulo;
> -
> -       /* Special cases where the DTO phase gets rounded to 0 or
> -        * to DTO modulo
> -        */
> -       if (phase <= 0 || phase >= modulo) {
> -               REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL,
> -                       phase <= 0 ?
> -                               (uint32_t)vtotal_max : (uint32_t)vtotal_min);
> -               REG_SET(OTG_V_TOTAL_MIN, 0, OTG_V_TOTAL_MIN, 0);
> -               REG_SET(OTG_V_TOTAL_MAX, 0, OTG_V_TOTAL_MAX, 0);
> -               REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, 0);
> -               REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, 0);
> -               REG_UPDATE_3(OTG_V_TOTAL_CONTROL,
> -                       OTG_V_TOTAL_MIN_SEL, 0,
> -                       OTG_V_TOTAL_MAX_SEL, 0,
> -                       OTG_SET_V_TOTAL_MIN_MASK_EN, 0);
> -               return;
> -       }
> -       REG_UPDATE_6(OTG_V_TOTAL_CONTROL,
> -               OTG_V_TOTAL_MIN_SEL, 1,
> -               OTG_V_TOTAL_MAX_SEL, 1,
> -               OTG_SET_V_TOTAL_MIN_MASK_EN, 1,
> -               OTG_SET_V_TOTAL_MIN_MASK, v_total_mask_value,
> -               OTG_VTOTAL_MID_REPLACING_MIN_EN, 0,
> -               OTG_VTOTAL_MID_REPLACING_MAX_EN, 0);
> -       REG_SET(OTG_V_TOTAL, 0, OTG_V_TOTAL, (uint32_t)vtotal_min);
> -       optc->funcs->set_vtotal_min_max(optc, vtotal_min, vtotal_max);
> -       REG_SET(OTG_M_CONST_DTO0, 0, OTG_M_CONST_DTO_PHASE, (uint32_t)phase);
> -       REG_SET(OTG_M_CONST_DTO1, 0, OTG_M_CONST_DTO_MODULO, (uint32_t)modulo);
> -}
> -
>  void dcn30_fpu_populate_dml_writeback_from_context(
>                 struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes)
>  {
> diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
> index cab864095ce7..e3b6ad6a8784 100644
> --- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
> +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
> @@ -29,9 +29,6 @@
>  #include "core_types.h"
>  #include "dcn20/dcn20_optc.h"
>
> -void optc3_fpu_set_vrr_m_const(struct timing_generator *optc,
> -               double vtotal_avg);
> -
>  void dcn30_fpu_populate_dml_writeback_from_context(
>                 struct dc *dc, struct resource_context *res_ctx, display_e2e_pipe_params_st *pipes);
>
> --
> 2.35.1
>


More information about the amd-gfx mailing list