[PATCH] drm: Fix repeated word in comments

Alex Deucher alexdeucher at gmail.com
Fri Aug 26 20:37:09 UTC 2022


On Fri, Aug 26, 2022 at 10:03 AM Jules Maselbas <jmaselbas at kalray.eu> wrote:
>
> Remove redundant words `the` and `this`.
>
> CC: David Airlie <airlied at linux.ie>
> CC: Maxime Ripard <mripard at kernel.org>
> CC: Thomas Zimmermann <tzimmermann at suse.de>
> CC: amd-gfx at lists.freedesktop.org
> CC: dri-devel at lists.freedesktop.org
> Signed-off-by: Jules Maselbas <jmaselbas at kalray.eu>

Please split this up per driver.

Thanks!

Alex

> ---
>  .../gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_arcturus.h | 2 +-
>  .../gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_navi10.h   | 2 +-
>  drivers/gpu/drm/display/drm_dp_helper.c                         | 2 +-
>  drivers/gpu/drm/drm_panel_orientation_quirks.c                  | 2 +-
>  drivers/gpu/drm/i915/gvt/scheduler.c                            | 2 +-
>  drivers/gpu/drm/i915/i915_irq.c                                 | 2 +-
>  drivers/gpu/drm/panel/panel-novatek-nt35510.c                   | 2 +-
>  7 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_arcturus.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_arcturus.h
> index 43d43d6addc0..4164da83380f 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_arcturus.h
> +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_arcturus.h
> @@ -486,7 +486,7 @@ typedef struct {
>    uint16_t Tvr_socLimit;            // Celcius
>    uint32_t FitLimit;                // Failures in time (failures per million parts over the defined lifetime)
>
> -  uint16_t PpmPowerLimit;           // Switch this this power limit when temperature is above PpmTempThreshold
> +  uint16_t PpmPowerLimit;           // Switch this power limit when temperature is above PpmTempThreshold
>    uint16_t PpmTemperatureThreshold;
>
>    // SECTION: Throttler settings
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_navi10.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_navi10.h
> index 04752ade1016..ba7c68a20425 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_navi10.h
> +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_navi10.h
> @@ -544,7 +544,7 @@ typedef struct {
>    uint16_t TplxLimit;               // Celcius
>    uint32_t FitLimit;                // Failures in time (failures per million parts over the defined lifetime)
>
> -  uint16_t PpmPowerLimit;           // Switch this this power limit when temperature is above PpmTempThreshold
> +  uint16_t PpmPowerLimit;           // Switch this power limit when temperature is above PpmTempThreshold
>    uint16_t PpmTemperatureThreshold;
>
>    // SECTION: Throttler settings
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index e5bab236b3ae..32b295003f49 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -1597,7 +1597,7 @@ static int drm_dp_aux_reply_duration(const struct drm_dp_aux_msg *msg)
>
>  /*
>   * Calculate the length of the i2c transfer in usec, assuming
> - * the i2c bus speed is as specified. Gives the the "worst"
> + * the i2c bus speed is as specified. Gives the "worst"
>   * case estimate, ie. successful while as long as possible.
>   * Doesn't account the "MOT" bit, and instead assumes each
>   * message includes a START, ADDRESS and STOP. Neither does it
> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> index fc1728d46ac2..dde2f4c4c6cb 100644
> --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> @@ -349,7 +349,7 @@ static const struct dmi_system_id orientation_data[] = {
>   * resolution expected by the quirk-table entry.
>   *
>   * Note this function is also used outside of the drm-subsys, by for example
> - * the efifb code. Because of this this function gets compiled into its own
> + * the efifb code. Because of this function gets compiled into its own
>   * kernel-module when built as a module.
>   *
>   * Returns:
> diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c
> index d6fe94cd0fdb..7670ae4dd8fa 100644
> --- a/drivers/gpu/drm/i915/gvt/scheduler.c
> +++ b/drivers/gpu/drm/i915/gvt/scheduler.c
> @@ -193,7 +193,7 @@ static int populate_shadow_context(struct intel_vgpu_workload *workload)
>                         workload->ring_context_gpa);
>
>         /* only need to ensure this context is not pinned/unpinned during the
> -        * period from last submission to this this submission.
> +        * period from last submission to this submission.
>          * Upon reaching this function, the currently submitted context is not
>          * supposed to get unpinned. If a misbehaving guest driver ever does
>          * this, it would corrupt itself.
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 73cebc6aa650..783a6ca41a61 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -65,7 +65,7 @@
>
>  /*
>   * Interrupt statistic for PMU. Increments the counter only if the
> - * interrupt originated from the the GPU so interrupts from a device which
> + * interrupt originated from the GPU so interrupts from a device which
>   * shares the interrupt line are not accounted.
>   */
>  static inline void pmu_irq_stats(struct drm_i915_private *i915,
> diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
> index 40ea41b0a5dd..4085822f619a 100644
> --- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
> @@ -231,7 +231,7 @@ struct nt35510_config {
>          * bits 0..2 in the lower nibble controls HCK, the booster clock
>          * frequency, the values are the same as for PCK in @bt1ctr.
>          * bits 4..5 in the upper nibble controls BTH, the boosting
> -        * amplification for the the step-up circuit.
> +        * amplification for the step-up circuit.
>          * 0 = AVDD + VDDB
>          * 1 = AVDD - AVEE
>          * 2 = AVDD - AVEE + VDDB
> --
> 2.17.1
>


More information about the amd-gfx mailing list