[PATCH 01/11] drm/amd/display: reset lane settings after each PHY repeater LT

[Jasdeep Dhillon]

From: Sung Joon Kim <sungkim at amd.com>

[why]
In LTTPR non-transparent mode, we need
to reset the cached lane settings before performing
link training on the next PHY repeater. Otherwise,
the cached lane settings will be used for the next
clock recovery e.g. VS = MAX (3) which should not be
the case according to the DP specs. We expect to use
minimum lane settings on each clock recovery sequence.

[how]
Reset DPCD and HW lane settings on each repeater LT.
Set training pattern to 0 for the repeater that failed LT
at the proper place.

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram at amd.com>
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Jasdeep Dhillon <jdhillon at amd.com>
Signed-off-by: Sung Joon Kim <sungkim at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index cd9c31b5e55d..d62b59d52ba8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2230,22 +2230,27 @@ static enum link_training_result dp_perform_8b_10b_link_training(
 				repeater_id--) {
 			status = perform_clock_recovery_sequence(link, link_res, lt_settings, repeater_id);
 
-			if (status != LINK_TRAINING_SUCCESS)
+			if (status != LINK_TRAINING_SUCCESS) {
+				repeater_training_done(link, repeater_id);
 				break;
+			}
 
 			status = perform_channel_equalization_sequence(link,
 					link_res,
 					lt_settings,
 					repeater_id);
 
+			repeater_training_done(link, repeater_id);
+
 			if (status != LINK_TRAINING_SUCCESS)
 				break;
 
-			repeater_training_done(link, repeater_id);
+			for (lane = 0; lane < LANE_COUNT_DP_MAX; lane++) {
+				lt_settings->dpcd_lane_settings[lane].raw = 0;
+				lt_settings->hw_lane_settings[lane].VOLTAGE_SWING = 0;
+				lt_settings->hw_lane_settings[lane].PRE_EMPHASIS = 0;
+			}
 		}
-
-		for (lane = 0; lane < (uint8_t)lt_settings->link_settings.lane_count; lane++)
-			lt_settings->dpcd_lane_settings[lane].raw = 0;
 	}
 
 	if (status == LINK_TRAINING_SUCCESS) {
-- 
2.25.1