[PATCH] drm/amdgpu: Fix wait for RLCG command completion

[Zhang, Bokun]

[AMD Official Use Only]

Tested-by: Bokun Zhang <bokun.zhang at amd.com>

The test configuration is 8VF with 100 loops of VM reboot.

-----Original Message-----
From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of Victor Skvortsov
Sent: Thursday, February 3, 2022 4:25 PM
To: amd-gfx at lists.freedesktop.org
Cc: Skvortsov, Victor <Victor.Skvortsov at amd.com>
Subject: [PATCH] drm/amdgpu: Fix wait for RLCG command completion

if (!(tmp & flag)) condition will always evaluate to true when the flag is 0x0 (AMDGPU_RLCG_GC_WRITE). Instead check that address bits are cleared to determine whether the command is complete.

Signed-off-by: Victor Skvortsov <victor.skvortsov at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 2 +-  drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index e1288901beb6..a8babe3bccb8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -902,7 +902,7 @@ static u32 amdgpu_virt_rlcg_reg_rw(struct amdgpu_device *adev, u32 offset, u32 v
 
 		for (i = 0; i < timeout; i++) {
 			tmp = readl(scratch_reg1);
-			if (!(tmp & flag))
+			if (!(tmp & AMDGPU_RLCG_SCRATCH1_ADDRESS_MASK))
 				break;
 			udelay(10);
 		}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index 40803aab136f..68f592f0e992 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -43,6 +43,8 @@
 #define AMDGPU_RLCG_WRONG_OPERATION_TYPE	0x2000000
 #define AMDGPU_RLCG_REG_NOT_IN_RANGE		0x1000000
 
+#define AMDGPU_RLCG_SCRATCH1_ADDRESS_MASK	0xFFFFF
+
 /* all asic after AI use this offset */  #define mmRCC_IOV_FUNC_IDENTIFIER 0xDE5
 /* tonga/fiji use this offset */
--
2.25.1