[PATCH 3/5] drm/amdgpu: move runtime pm init after drm and fbdev init
Alex Deucher
alexander.deucher at amd.com
Fri Jan 21 20:22:18 UTC 2022
Seems more logical to enable runtime pm at the end of
the init sequence so we don't end up entering runtime
suspend before init is finished.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 65 +++++++++++++++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 69 +------------------------
2 files changed, 66 insertions(+), 68 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 75ceb43392b1..89c3578bc818 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1968,6 +1968,22 @@ static bool amdgpu_is_fw_framebuffer(resource_size_t base,
return found;
}
+static void amdgpu_get_audio_func(struct amdgpu_device *adev)
+{
+ struct pci_dev *p = NULL;
+
+ p = pci_get_domain_bus_and_slot(pci_domain_nr(adev->pdev->bus),
+ adev->pdev->bus->number, 1);
+ if (p) {
+ pm_runtime_get_sync(&p->dev);
+
+ pm_runtime_mark_last_busy(&p->dev);
+ pm_runtime_put_autosuspend(&p->dev);
+
+ pci_dev_put(p);
+ }
+}
+
static int amdgpu_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -2100,6 +2116,48 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
if (ret)
DRM_ERROR("Creating debugfs files failed (%d).\n", ret);
+ if (adev->runpm) {
+ /* only need to skip on ATPX */
+ if (amdgpu_device_supports_px(ddev))
+ dev_pm_set_driver_flags(ddev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+ /* we want direct complete for BOCO */
+ if (amdgpu_device_supports_boco(ddev))
+ dev_pm_set_driver_flags(ddev->dev, DPM_FLAG_SMART_PREPARE |
+ DPM_FLAG_SMART_SUSPEND |
+ DPM_FLAG_MAY_SKIP_RESUME);
+ pm_runtime_use_autosuspend(ddev->dev);
+ pm_runtime_set_autosuspend_delay(ddev->dev, 5000);
+
+ pm_runtime_allow(ddev->dev);
+
+ pm_runtime_mark_last_busy(ddev->dev);
+ pm_runtime_put_autosuspend(ddev->dev);
+
+ /*
+ * For runpm implemented via BACO, PMFW will handle the
+ * timing for BACO in and out:
+ * - put ASIC into BACO state only when both video and
+ * audio functions are in D3 state.
+ * - pull ASIC out of BACO state when either video or
+ * audio function is in D0 state.
+ * Also, at startup, PMFW assumes both functions are in
+ * D0 state.
+ *
+ * So if snd driver was loaded prior to amdgpu driver
+ * and audio function was put into D3 state, there will
+ * be no PMFW-aware D-state transition(D0->D3) on runpm
+ * suspend. Thus the BACO will be not correctly kicked in.
+ *
+ * Via amdgpu_get_audio_func(), the audio dev is put
+ * into D0 state. Then there will be a PMFW-aware D-state
+ * transition(D0->D3) on runpm suspend.
+ */
+ if (amdgpu_device_supports_baco(ddev) &&
+ !(adev->flags & AMD_IS_APU) &&
+ (adev->asic_type >= CHIP_NAVI10))
+ amdgpu_get_audio_func(adev);
+ }
+
return 0;
err_pci:
@@ -2111,8 +2169,15 @@ static void
amdgpu_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
+ struct amdgpu_device *adev = drm_to_adev(dev);
drm_dev_unplug(dev);
+
+ if (adev->runpm) {
+ pm_runtime_get_sync(dev->dev);
+ pm_runtime_forbid(dev->dev);
+ }
+
amdgpu_driver_unload_kms(dev);
/*
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 16a6da09c924..4c437ad2dd9a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -87,11 +87,6 @@ void amdgpu_driver_unload_kms(struct drm_device *dev)
if (adev->rmmio == NULL)
return;
- if (adev->runpm) {
- pm_runtime_get_sync(dev->dev);
- pm_runtime_forbid(dev->dev);
- }
-
if (amdgpu_acpi_smart_shift_update(dev, AMDGPU_SS_DRV_UNLOAD))
DRM_WARN("smart shift update failed\n");
@@ -124,22 +119,6 @@ void amdgpu_register_gpu_instance(struct amdgpu_device *adev)
mutex_unlock(&mgpu_info.mutex);
}
-static void amdgpu_get_audio_func(struct amdgpu_device *adev)
-{
- struct pci_dev *p = NULL;
-
- p = pci_get_domain_bus_and_slot(pci_domain_nr(adev->pdev->bus),
- adev->pdev->bus->number, 1);
- if (p) {
- pm_runtime_get_sync(&p->dev);
-
- pm_runtime_mark_last_busy(&p->dev);
- pm_runtime_put_autosuspend(&p->dev);
-
- pci_dev_put(p);
- }
-}
-
/**
* amdgpu_driver_load_kms - Main load function for KMS.
*
@@ -213,58 +192,12 @@ int amdgpu_driver_load_kms(struct amdgpu_device *adev, unsigned long flags)
if (acpi_status)
dev_dbg(dev->dev, "Error during ACPI methods call\n");
- if (adev->runpm) {
- /* only need to skip on ATPX */
- if (amdgpu_device_supports_px(dev))
- dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
- /* we want direct complete for BOCO */
- if (amdgpu_device_supports_boco(dev))
- dev_pm_set_driver_flags(dev->dev, DPM_FLAG_SMART_PREPARE |
- DPM_FLAG_SMART_SUSPEND |
- DPM_FLAG_MAY_SKIP_RESUME);
- pm_runtime_use_autosuspend(dev->dev);
- pm_runtime_set_autosuspend_delay(dev->dev, 5000);
-
- pm_runtime_allow(dev->dev);
-
- pm_runtime_mark_last_busy(dev->dev);
- pm_runtime_put_autosuspend(dev->dev);
-
- /*
- * For runpm implemented via BACO, PMFW will handle the
- * timing for BACO in and out:
- * - put ASIC into BACO state only when both video and
- * audio functions are in D3 state.
- * - pull ASIC out of BACO state when either video or
- * audio function is in D0 state.
- * Also, at startup, PMFW assumes both functions are in
- * D0 state.
- *
- * So if snd driver was loaded prior to amdgpu driver
- * and audio function was put into D3 state, there will
- * be no PMFW-aware D-state transition(D0->D3) on runpm
- * suspend. Thus the BACO will be not correctly kicked in.
- *
- * Via amdgpu_get_audio_func(), the audio dev is put
- * into D0 state. Then there will be a PMFW-aware D-state
- * transition(D0->D3) on runpm suspend.
- */
- if (amdgpu_device_supports_baco(dev) &&
- !(adev->flags & AMD_IS_APU) &&
- (adev->asic_type >= CHIP_NAVI10))
- amdgpu_get_audio_func(adev);
- }
-
if (amdgpu_acpi_smart_shift_update(dev, AMDGPU_SS_DRV_LOAD))
DRM_WARN("smart shift update failed\n");
out:
- if (r) {
- /* balance pm_runtime_get_sync in amdgpu_driver_unload_kms */
- if (adev->rmmio && adev->runpm)
- pm_runtime_put_noidle(dev->dev);
+ if (r)
amdgpu_driver_unload_kms(dev);
- }
return r;
}
--
2.34.1
More information about the amd-gfx
mailing list