[PATCH 30/31] drm/amd/display: Drop FPU code from dcn321 resource
Rodrigo Siqueira
Rodrigo.Siqueira at amd.com
Fri Jul 15 18:17:04 UTC 2022
This commit fully move the missing FPU operations from dcn321 resource
to dcn321 fpu. It also remove those FPU flags from the Makefile.
Reviewed-by: Harry Wentland <Harry.Wentland at amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
.../gpu/drm/amd/display/dc/dcn321/Makefile | 25 -
.../amd/display/dc/dcn321/dcn321_resource.c | 452 +-----------------
.../amd/display/dc/dml/dcn321/dcn321_fpu.c | 446 +++++++++++++++++
.../amd/display/dc/dml/dcn321/dcn321_fpu.h | 2 +
4 files changed, 450 insertions(+), 475 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/Makefile b/drivers/gpu/drm/amd/display/dc/dcn321/Makefile
index e554fd6c16f2..0a199c83bb5b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/Makefile
@@ -12,31 +12,6 @@
DCN321 = dcn321_resource.o dcn321_dio_link_encoder.o
-ifdef CONFIG_X86
-CFLAGS_$(AMDDALPATH)/dc/dcn321/dcn321_resource.o := -mhard-float -msse
-endif
-
-ifdef CONFIG_PPC64
-CFLAGS_$(AMDDALPATH)/dc/dcn321/dcn321_resource.o := -mhard-float -maltivec
-endif
-
-ifdef CONFIG_CC_IS_GCC
-ifeq ($(call cc-ifversion, -lt, 0701, y), y)
-IS_OLD_GCC = 1
-endif
-endif
-
-ifdef CONFIG_X86
-ifdef IS_OLD_GCC
-# Stack alignment mismatch, proceed with caution.
-# GCC < 7.1 cannot compile code using `double` and -mpreferred-stack-boundary=3
-# (8B stack alignment).
-CFLAGS_$(AMDDALPATH)/dc/dcn321/dcn321_resource.o += -mpreferred-stack-boundary=4
-else
-CFLAGS_$(AMDDALPATH)/dc/dcn321/dcn321_resource.o += -msse2
-endif
-endif
-
AMD_DAL_DCN321 = $(addprefix $(AMDDALPATH)/dc/dcn321/,$(DCN321))
AMD_DISPLAY_FILES += $(AMD_DAL_DCN321)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
index 6619bcb30de7..9ac0fcf79bed 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
@@ -1570,459 +1570,11 @@ static struct dc_cap_funcs cap_funcs = {
.get_dcc_compression_cap = dcn20_get_dcc_compression_cap
};
-
-static void dcn321_get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
- unsigned int *optimal_dcfclk,
- unsigned int *optimal_fclk)
-{
- double bw_from_dram, bw_from_dram1, bw_from_dram2;
-
- bw_from_dram1 = uclk_mts * dcn3_21_soc.num_chans *
- dcn3_21_soc.dram_channel_width_bytes * (dcn3_21_soc.max_avg_dram_bw_use_normal_percent / 100);
- bw_from_dram2 = uclk_mts * dcn3_21_soc.num_chans *
- dcn3_21_soc.dram_channel_width_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100);
-
- bw_from_dram = (bw_from_dram1 < bw_from_dram2) ? bw_from_dram1 : bw_from_dram2;
-
- if (optimal_fclk)
- *optimal_fclk = bw_from_dram /
- (dcn3_21_soc.fabric_datapath_to_dcn_data_return_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100));
-
- if (optimal_dcfclk)
- *optimal_dcfclk = bw_from_dram /
- (dcn3_21_soc.return_bus_width_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100));
-}
-
-static void remove_entry_from_table_at_index(struct _vcs_dpi_voltage_scaling_st *table, unsigned int *num_entries,
- unsigned int index)
-{
- int i;
-
- if (*num_entries == 0)
- return;
-
- for (i = index; i < *num_entries - 1; i++) {
- table[i] = table[i + 1];
- }
- memset(&table[--(*num_entries)], 0, sizeof(struct _vcs_dpi_voltage_scaling_st));
-}
-
-static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
- struct _vcs_dpi_voltage_scaling_st *table, unsigned int *num_entries)
+static void dcn321_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
{
- int i, j;
- struct _vcs_dpi_voltage_scaling_st entry = {0};
-
- unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0,
- max_phyclk_mhz = 0, max_dtbclk_mhz = 0, max_fclk_mhz = 0, max_uclk_mhz = 0;
-
- unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299;
-
- static const unsigned int num_dcfclk_stas = 5;
- unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564};
-
- unsigned int num_uclk_dpms = 0;
- unsigned int num_fclk_dpms = 0;
- unsigned int num_dcfclk_dpms = 0;
-
- for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
- if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
- max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
- if (bw_params->clk_table.entries[i].fclk_mhz > max_fclk_mhz)
- max_fclk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
- if (bw_params->clk_table.entries[i].memclk_mhz > max_uclk_mhz)
- max_uclk_mhz = bw_params->clk_table.entries[i].memclk_mhz;
- if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
- max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
- if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
- max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
- if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
- max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
- if (bw_params->clk_table.entries[i].dtbclk_mhz > max_dtbclk_mhz)
- max_dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
-
- if (bw_params->clk_table.entries[i].memclk_mhz > 0)
- num_uclk_dpms++;
- if (bw_params->clk_table.entries[i].fclk_mhz > 0)
- num_fclk_dpms++;
- if (bw_params->clk_table.entries[i].dcfclk_mhz > 0)
- num_dcfclk_dpms++;
- }
-
- if (!max_dcfclk_mhz || !max_dispclk_mhz || !max_dtbclk_mhz)
- return -1;
-
- if (max_dppclk_mhz == 0)
- max_dppclk_mhz = max_dispclk_mhz;
-
- if (max_fclk_mhz == 0)
- max_fclk_mhz = max_dcfclk_mhz * dcn3_21_soc.pct_ideal_sdp_bw_after_urgent / dcn3_21_soc.pct_ideal_fabric_bw_after_urgent;
-
- if (max_phyclk_mhz == 0)
- max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
-
- *num_entries = 0;
- entry.dispclk_mhz = max_dispclk_mhz;
- entry.dscclk_mhz = max_dispclk_mhz / 3;
- entry.dppclk_mhz = max_dppclk_mhz;
- entry.dtbclk_mhz = max_dtbclk_mhz;
- entry.phyclk_mhz = max_phyclk_mhz;
- entry.phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
- entry.phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
-
- // Insert all the DCFCLK STAs
- for (i = 0; i < num_dcfclk_stas; i++) {
- entry.dcfclk_mhz = dcfclk_sta_targets[i];
- entry.fabricclk_mhz = 0;
- entry.dram_speed_mts = 0;
-
- DC_FP_START();
- dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
- DC_FP_END();
- }
-
- // Insert the max DCFCLK
- entry.dcfclk_mhz = max_dcfclk_mhz;
- entry.fabricclk_mhz = 0;
- entry.dram_speed_mts = 0;
-
DC_FP_START();
- dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+ dcn321_update_bw_bounding_box_fpu(dc, bw_params);
DC_FP_END();
-
- // Insert the UCLK DPMS
- for (i = 0; i < num_uclk_dpms; i++) {
- entry.dcfclk_mhz = 0;
- entry.fabricclk_mhz = 0;
- entry.dram_speed_mts = bw_params->clk_table.entries[i].memclk_mhz * 16;
-
- DC_FP_START();
- dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
- DC_FP_END();
- }
-
- // If FCLK is coarse grained, insert individual DPMs.
- if (num_fclk_dpms > 2) {
- for (i = 0; i < num_fclk_dpms; i++) {
- entry.dcfclk_mhz = 0;
- entry.fabricclk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
- entry.dram_speed_mts = 0;
-
- DC_FP_START();
- dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
- DC_FP_END();
- }
- }
- // If FCLK fine grained, only insert max
- else {
- entry.dcfclk_mhz = 0;
- entry.fabricclk_mhz = max_fclk_mhz;
- entry.dram_speed_mts = 0;
-
- DC_FP_START();
- dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
- DC_FP_END();
- }
-
- // At this point, the table contains all "points of interest" based on
- // DPMs from PMFW, and STAs. Table is sorted by BW, and all clock
- // ratios (by derate, are exact).
-
- // Remove states that require higher clocks than are supported
- for (i = *num_entries - 1; i >= 0 ; i--) {
- if (table[i].dcfclk_mhz > max_dcfclk_mhz ||
- table[i].fabricclk_mhz > max_fclk_mhz ||
- table[i].dram_speed_mts > max_uclk_mhz * 16)
- remove_entry_from_table_at_index(table, num_entries, i);
- }
-
- // At this point, the table only contains supported points of interest
- // it could be used as is, but some states may be redundant due to
- // coarse grained nature of some clocks, so we want to round up to
- // coarse grained DPMs and remove duplicates.
-
- // Round up UCLKs
- for (i = *num_entries - 1; i >= 0 ; i--) {
- for (j = 0; j < num_uclk_dpms; j++) {
- if (bw_params->clk_table.entries[j].memclk_mhz * 16 >= table[i].dram_speed_mts) {
- table[i].dram_speed_mts = bw_params->clk_table.entries[j].memclk_mhz * 16;
- break;
- }
- }
- }
-
- // If FCLK is coarse grained, round up to next DPMs
- if (num_fclk_dpms > 2) {
- for (i = *num_entries - 1; i >= 0 ; i--) {
- for (j = 0; j < num_fclk_dpms; j++) {
- if (bw_params->clk_table.entries[j].fclk_mhz >= table[i].fabricclk_mhz) {
- table[i].fabricclk_mhz = bw_params->clk_table.entries[j].fclk_mhz;
- break;
- }
- }
- }
- }
- // Otherwise, round up to minimum.
- else {
- for (i = *num_entries - 1; i >= 0 ; i--) {
- if (table[i].fabricclk_mhz < min_fclk_mhz) {
- table[i].fabricclk_mhz = min_fclk_mhz;
- break;
- }
- }
- }
-
- // Round DCFCLKs up to minimum
- for (i = *num_entries - 1; i >= 0 ; i--) {
- if (table[i].dcfclk_mhz < min_dcfclk_mhz) {
- table[i].dcfclk_mhz = min_dcfclk_mhz;
- break;
- }
- }
-
- // Remove duplicate states, note duplicate states are always neighbouring since table is sorted.
- i = 0;
- while (i < *num_entries - 1) {
- if (table[i].dcfclk_mhz == table[i + 1].dcfclk_mhz &&
- table[i].fabricclk_mhz == table[i + 1].fabricclk_mhz &&
- table[i].dram_speed_mts == table[i + 1].dram_speed_mts)
- remove_entry_from_table_at_index(table, num_entries, i + 1);
- else
- i++;
- }
-
- // Fix up the state indicies
- for (i = *num_entries - 1; i >= 0 ; i--) {
- table[i].state = i;
- }
-
- return 0;
-}
-
-/* dcn321_update_bw_bounding_box
- * This would override some dcn3_2 ip_or_soc initial parameters hardcoded from spreadsheet
- * with actual values as per dGPU SKU:
- * -with passed few options from dc->config
- * -with dentist_vco_frequency from Clk Mgr (currently hardcoded, but might need to get it from PM FW)
- * -with passed latency values (passed in ns units) in dc-> bb override for debugging purposes
- * -with passed latencies from VBIOS (in 100_ns units) if available for certain dGPU SKU
- * -with number of DRAM channels from VBIOS (which differ for certain dGPU SKU of the same ASIC)
- * -clocks levels with passed clk_table entries from Clk Mgr as reported by PM FW for different
- * clocks (which might differ for certain dGPU SKU of the same ASIC)
- */
-static void dcn321_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
-{
- if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
- /* Overrides from dc->config options */
- dcn3_21_ip.clamp_min_dcfclk = dc->config.clamp_min_dcfclk;
-
- /* Override from passed dc->bb_overrides if available*/
- if ((int)(dcn3_21_soc.sr_exit_time_us * 1000) != dc->bb_overrides.sr_exit_time_ns
- && dc->bb_overrides.sr_exit_time_ns) {
- dcn3_21_soc.sr_exit_time_us = dc->bb_overrides.sr_exit_time_ns / 1000.0;
- }
-
- if ((int)(dcn3_21_soc.sr_enter_plus_exit_time_us * 1000)
- != dc->bb_overrides.sr_enter_plus_exit_time_ns
- && dc->bb_overrides.sr_enter_plus_exit_time_ns) {
- dcn3_21_soc.sr_enter_plus_exit_time_us =
- dc->bb_overrides.sr_enter_plus_exit_time_ns / 1000.0;
- }
-
- if ((int)(dcn3_21_soc.urgent_latency_us * 1000) != dc->bb_overrides.urgent_latency_ns
- && dc->bb_overrides.urgent_latency_ns) {
- dcn3_21_soc.urgent_latency_us = dc->bb_overrides.urgent_latency_ns / 1000.0;
- }
-
- if ((int)(dcn3_21_soc.dram_clock_change_latency_us * 1000)
- != dc->bb_overrides.dram_clock_change_latency_ns
- && dc->bb_overrides.dram_clock_change_latency_ns) {
- dcn3_21_soc.dram_clock_change_latency_us =
- dc->bb_overrides.dram_clock_change_latency_ns / 1000.0;
- }
-
- if ((int)(dcn3_21_soc.dummy_pstate_latency_us * 1000)
- != dc->bb_overrides.dummy_clock_change_latency_ns
- && dc->bb_overrides.dummy_clock_change_latency_ns) {
- dcn3_21_soc.dummy_pstate_latency_us =
- dc->bb_overrides.dummy_clock_change_latency_ns / 1000.0;
- }
-
- /* Override from VBIOS if VBIOS bb_info available */
- if (dc->ctx->dc_bios->funcs->get_soc_bb_info) {
- struct bp_soc_bb_info bb_info = {0};
-
- if (dc->ctx->dc_bios->funcs->get_soc_bb_info(dc->ctx->dc_bios, &bb_info) == BP_RESULT_OK) {
- if (bb_info.dram_clock_change_latency_100ns > 0)
- dcn3_21_soc.dram_clock_change_latency_us = bb_info.dram_clock_change_latency_100ns * 10;
-
- if (bb_info.dram_sr_enter_exit_latency_100ns > 0)
- dcn3_21_soc.sr_enter_plus_exit_time_us = bb_info.dram_sr_enter_exit_latency_100ns * 10;
-
- if (bb_info.dram_sr_exit_latency_100ns > 0)
- dcn3_21_soc.sr_exit_time_us = bb_info.dram_sr_exit_latency_100ns * 10;
- }
- }
-
- /* Override from VBIOS for num_chan */
- if (dc->ctx->dc_bios->vram_info.num_chans)
- dcn3_21_soc.num_chans = dc->ctx->dc_bios->vram_info.num_chans;
-
- if (dc->ctx->dc_bios->vram_info.dram_channel_width_bytes)
- dcn3_21_soc.dram_channel_width_bytes = dc->ctx->dc_bios->vram_info.dram_channel_width_bytes;
-
- }
-
- /* Override dispclk_dppclk_vco_speed_mhz from Clk Mgr */
- dcn3_21_soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
- dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
-
- /* Overrides Clock levelsfrom CLK Mgr table entries as reported by PM FW */
- if ((!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) && (bw_params->clk_table.entries[0].memclk_mhz)) {
- if (dc->debug.use_legacy_soc_bb_mechanism) {
- unsigned int i = 0, j = 0, num_states = 0;
-
- unsigned int dcfclk_mhz[DC__VOLTAGE_STATES] = {0};
- unsigned int dram_speed_mts[DC__VOLTAGE_STATES] = {0};
- unsigned int optimal_uclk_for_dcfclk_sta_targets[DC__VOLTAGE_STATES] = {0};
- unsigned int optimal_dcfclk_for_uclk[DC__VOLTAGE_STATES] = {0};
-
- unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {615, 906, 1324, 1564};
- unsigned int num_dcfclk_sta_targets = 4, num_uclk_states = 0;
- unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0, max_phyclk_mhz = 0;
-
- for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
- if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
- max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
- if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
- max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
- if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
- max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
- if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
- max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
- }
- if (!max_dcfclk_mhz)
- max_dcfclk_mhz = dcn3_21_soc.clock_limits[0].dcfclk_mhz;
- if (!max_dispclk_mhz)
- max_dispclk_mhz = dcn3_21_soc.clock_limits[0].dispclk_mhz;
- if (!max_dppclk_mhz)
- max_dppclk_mhz = dcn3_21_soc.clock_limits[0].dppclk_mhz;
- if (!max_phyclk_mhz)
- max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
-
- if (max_dcfclk_mhz > dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
- // If max DCFCLK is greater than the max DCFCLK STA target, insert into the DCFCLK STA target array
- dcfclk_sta_targets[num_dcfclk_sta_targets] = max_dcfclk_mhz;
- num_dcfclk_sta_targets++;
- } else if (max_dcfclk_mhz < dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
- // If max DCFCLK is less than the max DCFCLK STA target, cap values and remove duplicates
- for (i = 0; i < num_dcfclk_sta_targets; i++) {
- if (dcfclk_sta_targets[i] > max_dcfclk_mhz) {
- dcfclk_sta_targets[i] = max_dcfclk_mhz;
- break;
- }
- }
- // Update size of array since we "removed" duplicates
- num_dcfclk_sta_targets = i + 1;
- }
-
- num_uclk_states = bw_params->clk_table.num_entries;
-
- // Calculate optimal dcfclk for each uclk
- for (i = 0; i < num_uclk_states; i++) {
- dcn321_get_optimal_dcfclk_fclk_for_uclk(bw_params->clk_table.entries[i].memclk_mhz * 16,
- &optimal_dcfclk_for_uclk[i], NULL);
- if (optimal_dcfclk_for_uclk[i] < bw_params->clk_table.entries[0].dcfclk_mhz) {
- optimal_dcfclk_for_uclk[i] = bw_params->clk_table.entries[0].dcfclk_mhz;
- }
- }
-
- // Calculate optimal uclk for each dcfclk sta target
- for (i = 0; i < num_dcfclk_sta_targets; i++) {
- for (j = 0; j < num_uclk_states; j++) {
- if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j]) {
- optimal_uclk_for_dcfclk_sta_targets[i] =
- bw_params->clk_table.entries[j].memclk_mhz * 16;
- break;
- }
- }
- }
-
- i = 0;
- j = 0;
- // create the final dcfclk and uclk table
- while (i < num_dcfclk_sta_targets && j < num_uclk_states && num_states < DC__VOLTAGE_STATES) {
- if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j] && i < num_dcfclk_sta_targets) {
- dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
- dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
- } else {
- if (j < num_uclk_states && optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
- dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
- dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
- } else {
- j = num_uclk_states;
- }
- }
- }
-
- while (i < num_dcfclk_sta_targets && num_states < DC__VOLTAGE_STATES) {
- dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
- dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
- }
-
- while (j < num_uclk_states && num_states < DC__VOLTAGE_STATES &&
- optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
- dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
- dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
- }
-
- dcn3_21_soc.num_states = num_states;
- for (i = 0; i < dcn3_21_soc.num_states; i++) {
- dcn3_21_soc.clock_limits[i].state = i;
- dcn3_21_soc.clock_limits[i].dcfclk_mhz = dcfclk_mhz[i];
- dcn3_21_soc.clock_limits[i].fabricclk_mhz = dcfclk_mhz[i];
-
- /* Fill all states with max values of all these clocks */
- dcn3_21_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
- dcn3_21_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
- dcn3_21_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz;
- dcn3_21_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3;
-
- /* Populate from bw_params for DTBCLK, SOCCLK */
- if (i > 0) {
- if (!bw_params->clk_table.entries[i].dtbclk_mhz) {
- dcn3_21_soc.clock_limits[i].dtbclk_mhz = dcn3_21_soc.clock_limits[i-1].dtbclk_mhz;
- } else {
- dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
- }
- } else if (bw_params->clk_table.entries[i].dtbclk_mhz) {
- dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
- }
-
- if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0)
- dcn3_21_soc.clock_limits[i].socclk_mhz = dcn3_21_soc.clock_limits[i-1].socclk_mhz;
- else
- dcn3_21_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz;
-
- if (!dram_speed_mts[i] && i > 0)
- dcn3_21_soc.clock_limits[i].dram_speed_mts = dcn3_21_soc.clock_limits[i-1].dram_speed_mts;
- else
- dcn3_21_soc.clock_limits[i].dram_speed_mts = dram_speed_mts[i];
-
- /* These clocks cannot come from bw_params, always fill from dcn3_21_soc[0] */
- /* PHYCLK_D18, PHYCLK_D32 */
- dcn3_21_soc.clock_limits[i].phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
- dcn3_21_soc.clock_limits[i].phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
- }
- } else {
- build_synthetic_soc_states(bw_params, dcn3_21_soc.clock_limits, &dcn3_21_soc.num_states);
- }
-
- /* Re-init DML with updated bb */
- dml_init_instance(&dc->dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
- if (dc->current_state)
- dml_init_instance(&dc->current_state->bw_ctx.dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
- }
}
static struct resource_funcs dcn321_res_pool_funcs = {
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
index 78408698985b..6e72336b7975 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
@@ -24,6 +24,7 @@
*
*/
+#include "clk_mgr.h"
#include "resource.h"
#include "dcn321_fpu.h"
#include "dcn32/dcn32_resource.h"
@@ -236,3 +237,448 @@ void dcn321_insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *t
}
}
+static void remove_entry_from_table_at_index(struct _vcs_dpi_voltage_scaling_st *table, unsigned int *num_entries,
+ unsigned int index)
+{
+ int i;
+
+ if (*num_entries == 0)
+ return;
+
+ for (i = index; i < *num_entries - 1; i++) {
+ table[i] = table[i + 1];
+ }
+ memset(&table[--(*num_entries)], 0, sizeof(struct _vcs_dpi_voltage_scaling_st));
+}
+
+static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
+ struct _vcs_dpi_voltage_scaling_st *table, unsigned int *num_entries)
+{
+ int i, j;
+ struct _vcs_dpi_voltage_scaling_st entry = {0};
+
+ unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0,
+ max_phyclk_mhz = 0, max_dtbclk_mhz = 0, max_fclk_mhz = 0, max_uclk_mhz = 0;
+
+ unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299;
+
+ static const unsigned int num_dcfclk_stas = 5;
+ unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564};
+
+ unsigned int num_uclk_dpms = 0;
+ unsigned int num_fclk_dpms = 0;
+ unsigned int num_dcfclk_dpms = 0;
+
+ for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
+ if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
+ max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
+ if (bw_params->clk_table.entries[i].fclk_mhz > max_fclk_mhz)
+ max_fclk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
+ if (bw_params->clk_table.entries[i].memclk_mhz > max_uclk_mhz)
+ max_uclk_mhz = bw_params->clk_table.entries[i].memclk_mhz;
+ if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
+ max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
+ if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
+ max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
+ if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
+ max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
+ if (bw_params->clk_table.entries[i].dtbclk_mhz > max_dtbclk_mhz)
+ max_dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
+
+ if (bw_params->clk_table.entries[i].memclk_mhz > 0)
+ num_uclk_dpms++;
+ if (bw_params->clk_table.entries[i].fclk_mhz > 0)
+ num_fclk_dpms++;
+ if (bw_params->clk_table.entries[i].dcfclk_mhz > 0)
+ num_dcfclk_dpms++;
+ }
+
+ if (!max_dcfclk_mhz || !max_dispclk_mhz || !max_dtbclk_mhz)
+ return -1;
+
+ if (max_dppclk_mhz == 0)
+ max_dppclk_mhz = max_dispclk_mhz;
+
+ if (max_fclk_mhz == 0)
+ max_fclk_mhz = max_dcfclk_mhz * dcn3_21_soc.pct_ideal_sdp_bw_after_urgent / dcn3_21_soc.pct_ideal_fabric_bw_after_urgent;
+
+ if (max_phyclk_mhz == 0)
+ max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
+
+ *num_entries = 0;
+ entry.dispclk_mhz = max_dispclk_mhz;
+ entry.dscclk_mhz = max_dispclk_mhz / 3;
+ entry.dppclk_mhz = max_dppclk_mhz;
+ entry.dtbclk_mhz = max_dtbclk_mhz;
+ entry.phyclk_mhz = max_phyclk_mhz;
+ entry.phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
+ entry.phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
+
+ // Insert all the DCFCLK STAs
+ for (i = 0; i < num_dcfclk_stas; i++) {
+ entry.dcfclk_mhz = dcfclk_sta_targets[i];
+ entry.fabricclk_mhz = 0;
+ entry.dram_speed_mts = 0;
+
+ dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+ }
+
+ // Insert the max DCFCLK
+ entry.dcfclk_mhz = max_dcfclk_mhz;
+ entry.fabricclk_mhz = 0;
+ entry.dram_speed_mts = 0;
+
+ dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+
+ // Insert the UCLK DPMS
+ for (i = 0; i < num_uclk_dpms; i++) {
+ entry.dcfclk_mhz = 0;
+ entry.fabricclk_mhz = 0;
+ entry.dram_speed_mts = bw_params->clk_table.entries[i].memclk_mhz * 16;
+
+ dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+ }
+
+ // If FCLK is coarse grained, insert individual DPMs.
+ if (num_fclk_dpms > 2) {
+ for (i = 0; i < num_fclk_dpms; i++) {
+ entry.dcfclk_mhz = 0;
+ entry.fabricclk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
+ entry.dram_speed_mts = 0;
+
+ dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+ }
+ }
+ // If FCLK fine grained, only insert max
+ else {
+ entry.dcfclk_mhz = 0;
+ entry.fabricclk_mhz = max_fclk_mhz;
+ entry.dram_speed_mts = 0;
+
+ dcn321_insert_entry_into_table_sorted(table, num_entries, &entry);
+ }
+
+ // At this point, the table contains all "points of interest" based on
+ // DPMs from PMFW, and STAs. Table is sorted by BW, and all clock
+ // ratios (by derate, are exact).
+
+ // Remove states that require higher clocks than are supported
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ if (table[i].dcfclk_mhz > max_dcfclk_mhz ||
+ table[i].fabricclk_mhz > max_fclk_mhz ||
+ table[i].dram_speed_mts > max_uclk_mhz * 16)
+ remove_entry_from_table_at_index(table, num_entries, i);
+ }
+
+ // At this point, the table only contains supported points of interest
+ // it could be used as is, but some states may be redundant due to
+ // coarse grained nature of some clocks, so we want to round up to
+ // coarse grained DPMs and remove duplicates.
+
+ // Round up UCLKs
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ for (j = 0; j < num_uclk_dpms; j++) {
+ if (bw_params->clk_table.entries[j].memclk_mhz * 16 >= table[i].dram_speed_mts) {
+ table[i].dram_speed_mts = bw_params->clk_table.entries[j].memclk_mhz * 16;
+ break;
+ }
+ }
+ }
+
+ // If FCLK is coarse grained, round up to next DPMs
+ if (num_fclk_dpms > 2) {
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ for (j = 0; j < num_fclk_dpms; j++) {
+ if (bw_params->clk_table.entries[j].fclk_mhz >= table[i].fabricclk_mhz) {
+ table[i].fabricclk_mhz = bw_params->clk_table.entries[j].fclk_mhz;
+ break;
+ }
+ }
+ }
+ }
+ // Otherwise, round up to minimum.
+ else {
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ if (table[i].fabricclk_mhz < min_fclk_mhz) {
+ table[i].fabricclk_mhz = min_fclk_mhz;
+ break;
+ }
+ }
+ }
+
+ // Round DCFCLKs up to minimum
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ if (table[i].dcfclk_mhz < min_dcfclk_mhz) {
+ table[i].dcfclk_mhz = min_dcfclk_mhz;
+ break;
+ }
+ }
+
+ // Remove duplicate states, note duplicate states are always neighbouring since table is sorted.
+ i = 0;
+ while (i < *num_entries - 1) {
+ if (table[i].dcfclk_mhz == table[i + 1].dcfclk_mhz &&
+ table[i].fabricclk_mhz == table[i + 1].fabricclk_mhz &&
+ table[i].dram_speed_mts == table[i + 1].dram_speed_mts)
+ remove_entry_from_table_at_index(table, num_entries, i + 1);
+ else
+ i++;
+ }
+
+ // Fix up the state indicies
+ for (i = *num_entries - 1; i >= 0 ; i--) {
+ table[i].state = i;
+ }
+
+ return 0;
+}
+
+static void dcn321_get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
+ unsigned int *optimal_dcfclk,
+ unsigned int *optimal_fclk)
+{
+ double bw_from_dram, bw_from_dram1, bw_from_dram2;
+
+ bw_from_dram1 = uclk_mts * dcn3_21_soc.num_chans *
+ dcn3_21_soc.dram_channel_width_bytes * (dcn3_21_soc.max_avg_dram_bw_use_normal_percent / 100);
+ bw_from_dram2 = uclk_mts * dcn3_21_soc.num_chans *
+ dcn3_21_soc.dram_channel_width_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100);
+
+ bw_from_dram = (bw_from_dram1 < bw_from_dram2) ? bw_from_dram1 : bw_from_dram2;
+
+ if (optimal_fclk)
+ *optimal_fclk = bw_from_dram /
+ (dcn3_21_soc.fabric_datapath_to_dcn_data_return_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100));
+
+ if (optimal_dcfclk)
+ *optimal_dcfclk = bw_from_dram /
+ (dcn3_21_soc.return_bus_width_bytes * (dcn3_21_soc.max_avg_sdp_bw_use_normal_percent / 100));
+}
+
+/** dcn321_update_bw_bounding_box
+ * This would override some dcn3_2 ip_or_soc initial parameters hardcoded from spreadsheet
+ * with actual values as per dGPU SKU:
+ * -with passed few options from dc->config
+ * -with dentist_vco_frequency from Clk Mgr (currently hardcoded, but might need to get it from PM FW)
+ * -with passed latency values (passed in ns units) in dc-> bb override for debugging purposes
+ * -with passed latencies from VBIOS (in 100_ns units) if available for certain dGPU SKU
+ * -with number of DRAM channels from VBIOS (which differ for certain dGPU SKU of the same ASIC)
+ * -clocks levels with passed clk_table entries from Clk Mgr as reported by PM FW for different
+ * clocks (which might differ for certain dGPU SKU of the same ASIC)
+ */
+void dcn321_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_params)
+{
+ dc_assert_fp_enabled();
+ if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
+ /* Overrides from dc->config options */
+ dcn3_21_ip.clamp_min_dcfclk = dc->config.clamp_min_dcfclk;
+
+ /* Override from passed dc->bb_overrides if available*/
+ if ((int)(dcn3_21_soc.sr_exit_time_us * 1000) != dc->bb_overrides.sr_exit_time_ns
+ && dc->bb_overrides.sr_exit_time_ns) {
+ dcn3_21_soc.sr_exit_time_us = dc->bb_overrides.sr_exit_time_ns / 1000.0;
+ }
+
+ if ((int)(dcn3_21_soc.sr_enter_plus_exit_time_us * 1000)
+ != dc->bb_overrides.sr_enter_plus_exit_time_ns
+ && dc->bb_overrides.sr_enter_plus_exit_time_ns) {
+ dcn3_21_soc.sr_enter_plus_exit_time_us =
+ dc->bb_overrides.sr_enter_plus_exit_time_ns / 1000.0;
+ }
+
+ if ((int)(dcn3_21_soc.urgent_latency_us * 1000) != dc->bb_overrides.urgent_latency_ns
+ && dc->bb_overrides.urgent_latency_ns) {
+ dcn3_21_soc.urgent_latency_us = dc->bb_overrides.urgent_latency_ns / 1000.0;
+ }
+
+ if ((int)(dcn3_21_soc.dram_clock_change_latency_us * 1000)
+ != dc->bb_overrides.dram_clock_change_latency_ns
+ && dc->bb_overrides.dram_clock_change_latency_ns) {
+ dcn3_21_soc.dram_clock_change_latency_us =
+ dc->bb_overrides.dram_clock_change_latency_ns / 1000.0;
+ }
+
+ if ((int)(dcn3_21_soc.dummy_pstate_latency_us * 1000)
+ != dc->bb_overrides.dummy_clock_change_latency_ns
+ && dc->bb_overrides.dummy_clock_change_latency_ns) {
+ dcn3_21_soc.dummy_pstate_latency_us =
+ dc->bb_overrides.dummy_clock_change_latency_ns / 1000.0;
+ }
+
+ /* Override from VBIOS if VBIOS bb_info available */
+ if (dc->ctx->dc_bios->funcs->get_soc_bb_info) {
+ struct bp_soc_bb_info bb_info = {0};
+
+ if (dc->ctx->dc_bios->funcs->get_soc_bb_info(dc->ctx->dc_bios, &bb_info) == BP_RESULT_OK) {
+ if (bb_info.dram_clock_change_latency_100ns > 0)
+ dcn3_21_soc.dram_clock_change_latency_us = bb_info.dram_clock_change_latency_100ns * 10;
+
+ if (bb_info.dram_sr_enter_exit_latency_100ns > 0)
+ dcn3_21_soc.sr_enter_plus_exit_time_us = bb_info.dram_sr_enter_exit_latency_100ns * 10;
+
+ if (bb_info.dram_sr_exit_latency_100ns > 0)
+ dcn3_21_soc.sr_exit_time_us = bb_info.dram_sr_exit_latency_100ns * 10;
+ }
+ }
+
+ /* Override from VBIOS for num_chan */
+ if (dc->ctx->dc_bios->vram_info.num_chans)
+ dcn3_21_soc.num_chans = dc->ctx->dc_bios->vram_info.num_chans;
+
+ if (dc->ctx->dc_bios->vram_info.dram_channel_width_bytes)
+ dcn3_21_soc.dram_channel_width_bytes = dc->ctx->dc_bios->vram_info.dram_channel_width_bytes;
+
+ }
+
+ /* Override dispclk_dppclk_vco_speed_mhz from Clk Mgr */
+ dcn3_21_soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
+ dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
+
+ /* Overrides Clock levelsfrom CLK Mgr table entries as reported by PM FW */
+ if ((!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) && (bw_params->clk_table.entries[0].memclk_mhz)) {
+ if (dc->debug.use_legacy_soc_bb_mechanism) {
+ unsigned int i = 0, j = 0, num_states = 0;
+
+ unsigned int dcfclk_mhz[DC__VOLTAGE_STATES] = {0};
+ unsigned int dram_speed_mts[DC__VOLTAGE_STATES] = {0};
+ unsigned int optimal_uclk_for_dcfclk_sta_targets[DC__VOLTAGE_STATES] = {0};
+ unsigned int optimal_dcfclk_for_uclk[DC__VOLTAGE_STATES] = {0};
+
+ unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {615, 906, 1324, 1564};
+ unsigned int num_dcfclk_sta_targets = 4, num_uclk_states = 0;
+ unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0, max_phyclk_mhz = 0;
+
+ for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
+ if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
+ max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
+ if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
+ max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
+ if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
+ max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
+ if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
+ max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
+ }
+ if (!max_dcfclk_mhz)
+ max_dcfclk_mhz = dcn3_21_soc.clock_limits[0].dcfclk_mhz;
+ if (!max_dispclk_mhz)
+ max_dispclk_mhz = dcn3_21_soc.clock_limits[0].dispclk_mhz;
+ if (!max_dppclk_mhz)
+ max_dppclk_mhz = dcn3_21_soc.clock_limits[0].dppclk_mhz;
+ if (!max_phyclk_mhz)
+ max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
+
+ if (max_dcfclk_mhz > dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
+ // If max DCFCLK is greater than the max DCFCLK STA target, insert into the DCFCLK STA target array
+ dcfclk_sta_targets[num_dcfclk_sta_targets] = max_dcfclk_mhz;
+ num_dcfclk_sta_targets++;
+ } else if (max_dcfclk_mhz < dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
+ // If max DCFCLK is less than the max DCFCLK STA target, cap values and remove duplicates
+ for (i = 0; i < num_dcfclk_sta_targets; i++) {
+ if (dcfclk_sta_targets[i] > max_dcfclk_mhz) {
+ dcfclk_sta_targets[i] = max_dcfclk_mhz;
+ break;
+ }
+ }
+ // Update size of array since we "removed" duplicates
+ num_dcfclk_sta_targets = i + 1;
+ }
+
+ num_uclk_states = bw_params->clk_table.num_entries;
+
+ // Calculate optimal dcfclk for each uclk
+ for (i = 0; i < num_uclk_states; i++) {
+ dcn321_get_optimal_dcfclk_fclk_for_uclk(bw_params->clk_table.entries[i].memclk_mhz * 16,
+ &optimal_dcfclk_for_uclk[i], NULL);
+ if (optimal_dcfclk_for_uclk[i] < bw_params->clk_table.entries[0].dcfclk_mhz) {
+ optimal_dcfclk_for_uclk[i] = bw_params->clk_table.entries[0].dcfclk_mhz;
+ }
+ }
+
+ // Calculate optimal uclk for each dcfclk sta target
+ for (i = 0; i < num_dcfclk_sta_targets; i++) {
+ for (j = 0; j < num_uclk_states; j++) {
+ if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j]) {
+ optimal_uclk_for_dcfclk_sta_targets[i] =
+ bw_params->clk_table.entries[j].memclk_mhz * 16;
+ break;
+ }
+ }
+ }
+
+ i = 0;
+ j = 0;
+ // create the final dcfclk and uclk table
+ while (i < num_dcfclk_sta_targets && j < num_uclk_states && num_states < DC__VOLTAGE_STATES) {
+ if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j] && i < num_dcfclk_sta_targets) {
+ dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
+ dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
+ } else {
+ if (j < num_uclk_states && optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
+ dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
+ dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
+ } else {
+ j = num_uclk_states;
+ }
+ }
+ }
+
+ while (i < num_dcfclk_sta_targets && num_states < DC__VOLTAGE_STATES) {
+ dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
+ dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
+ }
+
+ while (j < num_uclk_states && num_states < DC__VOLTAGE_STATES &&
+ optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
+ dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
+ dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
+ }
+
+ dcn3_21_soc.num_states = num_states;
+ for (i = 0; i < dcn3_21_soc.num_states; i++) {
+ dcn3_21_soc.clock_limits[i].state = i;
+ dcn3_21_soc.clock_limits[i].dcfclk_mhz = dcfclk_mhz[i];
+ dcn3_21_soc.clock_limits[i].fabricclk_mhz = dcfclk_mhz[i];
+
+ /* Fill all states with max values of all these clocks */
+ dcn3_21_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
+ dcn3_21_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
+ dcn3_21_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz;
+ dcn3_21_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3;
+
+ /* Populate from bw_params for DTBCLK, SOCCLK */
+ if (i > 0) {
+ if (!bw_params->clk_table.entries[i].dtbclk_mhz) {
+ dcn3_21_soc.clock_limits[i].dtbclk_mhz = dcn3_21_soc.clock_limits[i-1].dtbclk_mhz;
+ } else {
+ dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
+ }
+ } else if (bw_params->clk_table.entries[i].dtbclk_mhz) {
+ dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
+ }
+
+ if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0)
+ dcn3_21_soc.clock_limits[i].socclk_mhz = dcn3_21_soc.clock_limits[i-1].socclk_mhz;
+ else
+ dcn3_21_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz;
+
+ if (!dram_speed_mts[i] && i > 0)
+ dcn3_21_soc.clock_limits[i].dram_speed_mts = dcn3_21_soc.clock_limits[i-1].dram_speed_mts;
+ else
+ dcn3_21_soc.clock_limits[i].dram_speed_mts = dram_speed_mts[i];
+
+ /* These clocks cannot come from bw_params, always fill from dcn3_21_soc[0] */
+ /* PHYCLK_D18, PHYCLK_D32 */
+ dcn3_21_soc.clock_limits[i].phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
+ dcn3_21_soc.clock_limits[i].phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
+ }
+ } else {
+ build_synthetic_soc_states(bw_params, dcn3_21_soc.clock_limits, &dcn3_21_soc.num_states);
+ }
+
+ /* Re-init DML with updated bb */
+ dml_init_instance(&dc->dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
+ if (dc->current_state)
+ dml_init_instance(&dc->current_state->bw_ctx.dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
+ }
+}
+
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.h
index 5b6b28526e18..e8fad9b4be69 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.h
@@ -33,4 +33,6 @@ void dcn321_insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *t
unsigned int *num_entries,
struct _vcs_dpi_voltage_scaling_st *entry);
+void dcn321_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_params);
+
#endif
--
2.37.0
More information about the amd-gfx
mailing list