[PATCH] drm/amd: Fix typo 'the the' in comment

[Alex Deucher]

Applied.  Thanks!

Alex

On Thu, Jul 21, 2022 at 3:26 AM Slark Xiao <slark_xiao at 163.com> wrote:
>
> Replace 'the the' with 'the' in the comment.
>
> Signed-off-by: Slark Xiao <slark_xiao at 163.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 2 +-
>  drivers/gpu/drm/amd/include/atombios.h    | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
> index ff659d4f772b..8adeb7469f1e 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
> @@ -47,7 +47,7 @@
>   * for GPU/CPU synchronization.  When the fence is written,
>   * it is expected that all buffers associated with that fence
>   * are no longer in use by the associated ring on the GPU and
> - * that the the relevant GPU caches have been flushed.
> + * that the relevant GPU caches have been flushed.
>   */
>
>  struct amdgpu_fence {
> diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
> index 1f9df4e7509b..15943bc21bc5 100644
> --- a/drivers/gpu/drm/amd/include/atombios.h
> +++ b/drivers/gpu/drm/amd/include/atombios.h
> @@ -3255,8 +3255,8 @@ ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  t
>  ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
>
>
> -usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
> -usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
> +usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
> +usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
>  */
>
>
> --
> 2.25.1
>