[RESEND RFC 10/18] drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()

[Lyude Paul]

Currently with the MST helpers we avoid releasing payloads _and_ avoid
pulling in the MST state if there aren't any actual payload changes. While
we want to keep the first step, we need to now make sure that we're always
pulling in the MST state on all modesets that can modify payloads - even if
the resulting payloads in the atomic state are identical to the previous
ones.

This is mainly to make it so that if a CRTC is still assigned to a
connector but is set to DPMS off, the CRTC still holds it's payload
allocation in the atomic state and still appropriately pulls in the MST
state for commit tracking. Otherwise, we'll occasionally forget to update
MST payloads from changes caused by non-atomic DPMS changes. Doing this
also allows us to track bandwidth limitations in a state correctly even
between DPMS changes, so that there's no chance of a simple ->active change
being rejected by the atomic check.

Signed-off-by: Lyude Paul <lyude at redhat.com>
Cc: Wayne Lin <Wayne.Lin at amd.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo at amd.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Sean Paul <sean at poorly.run>
---
 drivers/gpu/drm/display/drm_dp_mst_topology.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
index e73b34c0cc9e..c5edcf2a26c8 100644
--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -4485,6 +4485,7 @@ int drm_dp_atomic_release_time_slots(struct drm_atomic_state *state,
 	struct drm_dp_mst_topology_state *topology_state;
 	struct drm_dp_mst_atomic_payload *payload;
 	struct drm_connector_state *old_conn_state, *new_conn_state;
+	bool update_payload = true;
 
 	old_conn_state = drm_atomic_get_old_connector_state(state, port->connector);
 	if (!old_conn_state->crtc)
@@ -4496,10 +4497,12 @@ int drm_dp_atomic_release_time_slots(struct drm_atomic_state *state,
 		struct drm_crtc_state *crtc_state =
 			drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
 
-		if (!crtc_state ||
-		    !drm_atomic_crtc_needs_modeset(crtc_state) ||
-		    crtc_state->enable)
+		/* No modeset means no payload changes, so it's safe to not pull in the MST state */
+		if (!crtc_state || !drm_atomic_crtc_needs_modeset(crtc_state))
 			return 0;
+
+		if (!crtc_state->mode_changed && !crtc_state->connectors_changed)
+			update_payload = false;
 	}
 
 	topology_state = drm_atomic_get_mst_topology_state(state, mgr);
@@ -4507,6 +4510,8 @@ int drm_dp_atomic_release_time_slots(struct drm_atomic_state *state,
 		return PTR_ERR(topology_state);
 
 	topology_state->pending_crtc_mask |= drm_crtc_mask(old_conn_state->crtc);
+	if (!update_payload)
+		return 0;
 
 	payload = drm_atomic_get_mst_payload_state(topology_state, port);
 	if (WARN_ON(!payload)) {
-- 
2.35.3