[PATCH 10/12] drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2

[Agustin Gutierrez]

From: Charlene Liu <Charlene.Liu at amd.com>

[why]
DCN31 has this in zstate save/restore sequence.
need for non_zstate supported ASIC

[how]
add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas at amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez at amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu at amd.com>
---
 .../amd/display/dc/dcn31/dcn31_panel_cntl.c   |  5 +-
 .../drm/amd/display/dc/inc/hw/panel_cntl.h    |  1 +
 .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h   | 88 ++++++++++++++++++-
 3 files changed, 91 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
index 83ece02380a8..11ea9d13e312 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
@@ -83,7 +83,8 @@ static uint32_t dcn31_panel_cntl_hw_init(struct panel_cntl *panel_cntl)
 	cmd.panel_cntl.data.bl_pwm_period_cntl = panel_cntl->stored_backlight_registers.BL_PWM_PERIOD_CNTL;
 	cmd.panel_cntl.data.bl_pwm_ref_div1 =
 		panel_cntl->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV;
-
+	cmd.panel_cntl.data.bl_pwm_ref_div2 =
+		panel_cntl->stored_backlight_registers.PANEL_PWRSEQ_REF_DIV2;
 	if (!dc_dmub_srv_cmd_with_reply_data(dc_dmub_srv, &cmd))
 		return 0;
 
@@ -92,6 +93,8 @@ static uint32_t dcn31_panel_cntl_hw_init(struct panel_cntl *panel_cntl)
 	panel_cntl->stored_backlight_registers.BL_PWM_PERIOD_CNTL = cmd.panel_cntl.data.bl_pwm_period_cntl;
 	panel_cntl->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV =
 		cmd.panel_cntl.data.bl_pwm_ref_div1;
+	panel_cntl->stored_backlight_registers.PANEL_PWRSEQ_REF_DIV2 =
+		cmd.panel_cntl.data.bl_pwm_ref_div2;
 
 	return cmd.panel_cntl.data.current_backlight;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
index 48eac622c6a0..24af9d80b937 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
@@ -39,6 +39,7 @@ struct panel_cntl_backlight_registers {
 	unsigned int BL_PWM_CNTL2;
 	unsigned int BL_PWM_PERIOD_CNTL;
 	unsigned int LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV;
+	unsigned int PANEL_PWRSEQ_REF_DIV2;
 };
 
 struct panel_cntl_funcs {
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 8521508af755..294717e09abf 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -1450,6 +1450,80 @@ enum dmub_cmd_mall_type {
 	DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3,
 };
 
+/**
+ * PHY Link rate for DP.
+ */
+enum phy_link_rate {
+	/**
+	 * not supported.
+	 */
+	PHY_RATE_UNKNOWN = 0,
+	/**
+	 * Rate_1 (RBR)	- 1.62 Gbps/Lane
+	 */
+	PHY_RATE_162 = 1,
+	/**
+	 * Rate_2		- 2.16 Gbps/Lane
+	 */
+	PHY_RATE_216 = 2,
+	/**
+	 * Rate_3		- 2.43 Gbps/Lane
+	 */
+	PHY_RATE_243 = 3,
+	/**
+	 * Rate_4 (HBR)	- 2.70 Gbps/Lane
+	 */
+	PHY_RATE_270 = 4,
+	/**
+	 * Rate_5 (RBR2)- 3.24 Gbps/Lane
+	 */
+	PHY_RATE_324 = 5,
+	/**
+	 * Rate_6		- 4.32 Gbps/Lane
+	 */
+	PHY_RATE_432 = 6,
+	/**
+	 * Rate_7 (HBR2)- 5.40 Gbps/Lane
+	 */
+	PHY_RATE_540 = 7,
+	/**
+	 * Rate_8 (HBR3)- 8.10 Gbps/Lane
+	 */
+	PHY_RATE_810 = 8,
+	/**
+	 * UHBR10 - 10.0 Gbps/Lane
+	 */
+	PHY_RATE_1000 = 9,
+	/**
+	 * UHBR13.5 - 13.5 Gbps/Lane
+	 */
+	PHY_RATE_1350 = 10,
+	/**
+	 * UHBR10 - 20.0 Gbps/Lane
+	 */
+	PHY_RATE_2000 = 11,
+};
+
+/**
+ * enum dmub_phy_fsm_state - PHY FSM states.
+ * PHY FSM state to transit to during PSR enable/disable.
+ */
+enum dmub_phy_fsm_state {
+	DMUB_PHY_FSM_POWER_UP_DEFAULT = 0,
+	DMUB_PHY_FSM_RESET,
+	DMUB_PHY_FSM_RESET_RELEASED,
+	DMUB_PHY_FSM_SRAM_LOAD_DONE,
+	DMUB_PHY_FSM_INITIALIZED,
+	DMUB_PHY_FSM_CALIBRATED,
+	DMUB_PHY_FSM_CALIBRATED_LP,
+	DMUB_PHY_FSM_CALIBRATED_PG,
+	DMUB_PHY_FSM_POWER_DOWN,
+	DMUB_PHY_FSM_PLL_EN,
+	DMUB_PHY_FSM_TX_EN,
+	DMUB_PHY_FSM_FAST_LP,
+};
+
+
 
 /**
  * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command.
@@ -1698,9 +1772,16 @@ struct dmub_cmd_psr_force_static_data {
 	 */
 	uint8_t panel_inst;
 	/**
-	 * Explicit padding to 4 byte boundary.
+	 * Phy state to enter.
+	 * Values to use are defined in dmub_phy_fsm_state
 	 */
-	uint8_t pad[2];
+	uint8_t phy_fsm_state;
+	/**
+	 * Phy rate for DP - RBR/HBR/HBR2/HBR3.
+	 * Set this using enum phy_link_rate.
+	 * This does not support HDMI/DP2 for now.
+	 */
+	uint8_t phy_rate;
 };
 
 /**
@@ -2377,6 +2458,9 @@ struct dmub_cmd_panel_cntl_data {
 	uint32_t bl_pwm_ref_div1; /* in/out */
 	uint8_t is_backlight_on : 1; /* in/out */
 	uint8_t is_powered_on : 1; /* in/out */
+	uint8_t padding[3];
+	uint32_t bl_pwm_ref_div2; /* in/out */
+	uint8_t reserved[4];
 };
 
 /**
-- 
2.35.1