[PATCH] drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw

Paul Menzel pmenzel at molgen.mpg.de
Tue Mar 29 16:46:35 UTC 2022


Dear Chandan,


Am 29.03.22 um 10:29 schrieb CHANDAN VURDIGERE NATARAJ:

Is it common to spell your name all uppercase? If not, please use 
Chandan nVurdigere Nataraj.

> [WHY]

The [] already emphasize the word, so Why could be used.

> Below general protection fault observed when WebGL Aquarium is run for
> longer duration. If drm debug logs are enabled and set to 0x1f then the

In what browser and what version?

> issue is observed within 10 minutes of run.

Where you able to reproduce it without drm debug logs?

> [  100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
> [  100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G        W         5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
> [  100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
> [  100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
> [  100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
> [  100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
> [  100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
> [  100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
> [  100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
> [  100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
> [  100.848159] FS:  00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
> [  100.856240] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
> [  100.869106] Call Trace:
> [  100.871555]  <TASK>
> [  100.873655]  ? asm_sysvec_reschedule_ipi+0x12/0x20
> [  100.878449]  CalculateSwathAndDETConfiguration+0x1a3/0x6dd
> [  100.883937]  dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
> [  100.890467]  ? kallsyms_lookup_buildid+0xc8/0x163
> [  100.895173]  ? kallsyms_lookup_buildid+0xc8/0x163
> [  100.899874]  ? __sprint_symbol+0x80/0x135
> [  100.903883]  ? dm_update_plane_state+0x3f9/0x4d2
> [  100.908500]  ? symbol_string+0xb7/0xde
> [  100.912250]  ? number+0x145/0x29b
> [  100.915566]  ? vsnprintf+0x341/0x5ff
> [  100.919141]  ? desc_read_finalized_seq+0x39/0x87
> [  100.923755]  ? update_load_avg+0x1b9/0x607
> [  100.927849]  ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
> [  100.933416]  ? fetch_pipe_params+0xa4d/0xd0c
> [  100.937686]  ? dc_fpu_end+0x3d/0xa8
> [  100.941175]  dml_get_voltage_level+0x16b/0x180
> [  100.945619]  dcn30_internal_validate_bw+0x10e/0x89b
> [  100.950495]  ? dcn31_validate_bandwidth+0x68/0x1fc
> [  100.955285]  ? resource_build_scaling_params+0x98b/0xb8c
> [  100.960595]  ? dcn31_validate_bandwidth+0x68/0x1fc
> [  100.965384]  dcn31_validate_bandwidth+0x9a/0x1fc
> [  100.970001]  dc_validate_global_state+0x238/0x295
> [  100.974703]  amdgpu_dm_atomic_check+0x9c1/0xbce
> [  100.979235]  ? _printk+0x59/0x73
> [  100.982467]  drm_atomic_check_only+0x403/0x78b
> [  100.986912]  drm_mode_atomic_ioctl+0x49b/0x546
> [  100.991358]  ? drm_ioctl+0x1c1/0x3b3
> [  100.994936]  ? drm_atomic_set_property+0x92a/0x92a
> [  100.999725]  drm_ioctl_kernel+0xdc/0x149
> [  101.003648]  drm_ioctl+0x27f/0x3b3
> [  101.007051]  ? drm_atomic_set_property+0x92a/0x92a
> [  101.011842]  amdgpu_drm_ioctl+0x49/0x7d
> [  101.015679]  __se_sys_ioctl+0x7c/0xb8
> [  101.015685]  do_syscall_64+0x5f/0xb8
> [  101.015690]  ? __irq_exit_rcu+0x34/0x96
> 
> [HOW]
> It calles populate_dml_pipes which uses doubles to initialize.

calls

Excuse my ignorance. So using doubles causes a context switch?

> Adding FPU protection avoids context switch and probable loss of vba context
> as there is potential contention while drm debug logs are enabled.
> 
> Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj at amd.com>
> 
> diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
> index 826970f2bd0a..f27262417abe 100644
> --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
> +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
> @@ -1750,7 +1750,9 @@ bool dcn31_validate_bandwidth(struct dc *dc,
>   
>   	BW_VAL_TRACE_COUNT();
>   
> +	DC_FP_START();
>   	out = dcn30_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, fast_validate);
> +	DC_FP_END();
>   
>   	// Disable fast_validate to set min dcfclk in alculate_wm_and_dlg
>   	if (pipe_cnt == 0)


Kind regards,

Paul


More information about the amd-gfx mailing list