[PATCH v2 06/19] drm/amd/display: program PSR2 DPCD Configuration
David Zhang
dingchen.zhang at amd.com
Tue May 10 20:44:55 UTC 2022
[Why]
To support PSR2 Source DPCD configuration
[How]
Update the PSR2 Source DPCD settings while the PSR2 enabled
Signed-off-by: David Zhang <dingchen.zhang at amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 23 ++++++++++++++++++-
.../drm/amd/display/dc/inc/hw/link_encoder.h | 13 ++++++++++-
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 67ef357e5798..a391a58252bc 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3175,6 +3175,7 @@ bool dc_link_setup_psr(struct dc_link *link,
unsigned int panel_inst;
/* updateSinkPsrDpcdConfig*/
union dpcd_psr_configuration psr_configuration;
+ union dpcd_alpm_configuration alpm_configuration;
psr_context->controllerId = CONTROLLER_ID_UNDEFINED;
@@ -3200,7 +3201,7 @@ bool dc_link_setup_psr(struct dc_link *link,
psr_config->psr_frame_capture_indication_req;
/* Check for PSR v2*/
- if (psr_config->psr_version == 0x2) {
+ if (link->psr_settings.psr_version == DC_PSR_VERSION_SU_1) {
/* For PSR v2 selective update.
* Indicates whether sink should start capturing
* immediately following active scan line,
@@ -3211,6 +3212,14 @@ bool dc_link_setup_psr(struct dc_link *link,
* IRQ_HPD when CRC mismatch is detected.
*/
psr_configuration.bits.IRQ_HPD_WITH_CRC_ERROR = 1;
+ /* For PSR v2, set the bit when the Source device will
+ * be enabling PSR2 operation.
+ */
+ psr_configuration.bits.ENABLE_PSR2 = 1;
+ /* For PSR v2, the Sink device must be able to receive
+ * SU region updates early in the frame time.
+ */
+ psr_configuration.bits.EARLY_TRANSPORT_ENABLE = 1;
}
dm_helpers_dp_write_dpcd(
@@ -3220,6 +3229,18 @@ bool dc_link_setup_psr(struct dc_link *link,
&psr_configuration.raw,
sizeof(psr_configuration.raw));
+ if (link->psr_settings.psr_version == DC_PSR_VERSION_SU_1) {
+ memset(&alpm_configuration, 0, sizeof(alpm_configuration));
+
+ alpm_configuration.bits.ENABLE = 1;
+ dm_helpers_dp_write_dpcd(
+ link->ctx,
+ link,
+ DP_RECEIVER_ALPM_CONFIG,
+ &alpm_configuration.raw,
+ sizeof(alpm_configuration.raw));
+ }
+
psr_context->channel = link->ddc->ddc_pin->hw_info.ddc_channel;
psr_context->transmitterId = link->link_enc->transmitter;
psr_context->engineId = link->link_enc->preferred_engine;
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h b/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h
index 2013a70603ae..66132f3cac42 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h
@@ -85,7 +85,18 @@ union dpcd_psr_configuration {
unsigned char LINE_CAPTURE_INDICATION : 1;
/* For eDP 1.4, PSR v2*/
unsigned char IRQ_HPD_WITH_CRC_ERROR : 1;
- unsigned char RESERVED : 2;
+ unsigned char ENABLE_PSR2 : 1;
+ /* For eDP 1.5, PSR v2 w/ early transport */
+ unsigned char EARLY_TRANSPORT_ENABLE : 1;
+ } bits;
+ unsigned char raw;
+};
+
+union dpcd_alpm_configuration {
+ struct {
+ unsigned char ENABLE : 1;
+ unsigned char IRQ_HPD_ENABLE : 1;
+ unsigned char RESERVED : 6;
} bits;
unsigned char raw;
};
--
2.25.1
More information about the amd-gfx
mailing list