[PATCH 3/6] drm/amd/pm: update SMU 13.0.0 driver_if header

Evan Quan evan.quan at amd.com
Tue May 17 02:05:59 UTC 2022


To align with 78.37.0 and later PMFWs.

Signed-off-by: Evan Quan <evan.quan at amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang at amd.com>
Change-Id: I17c3a6b466c921cb5ffe5025a94023fae478c80e
---
 .../inc/pmfw_if/smu13_driver_if_v13_0_0.h     | 22 +++++++++----------
 drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h  |  2 +-
 2 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h
index ecc6411dfc8d..c1f76236da26 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h
@@ -671,8 +671,8 @@ typedef struct {
   uint16_t               reserved[2];
 
   //Frequency changes
-  uint16_t               GfxclkFmin;           // MHz
-  uint16_t               GfxclkFmax;           // MHz
+  int16_t                GfxclkFmin;           // MHz
+  int16_t                GfxclkFmax;           // MHz
   uint16_t               UclkFmin;             // MHz
   uint16_t               UclkFmax;             // MHz
 
@@ -683,15 +683,14 @@ typedef struct {
   //Fan control
   uint8_t                FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS];
   uint8_t                FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS];
-  uint16_t               FanMaximumRpm;
   uint16_t               FanMinimumPwm;
-  uint16_t               FanAcousticLimitRpm;
+  uint16_t               AcousticTargetRpmThreshold;
+  uint16_t               AcousticLimitRpmThreshold;
   uint16_t               FanTargetTemperature; // Degree Celcius
   uint8_t                FanZeroRpmEnable;
   uint8_t                FanZeroRpmStopTemp;
   uint8_t                FanMode;
-  uint8_t                Padding[1];
-
+  uint8_t                MaxOpTemp;
 
   uint32_t               Spare[13];
   uint32_t               MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround
@@ -719,15 +718,14 @@ typedef struct {
 
   uint8_t                FanLinearPwmPoints;
   uint8_t                FanLinearTempPoints;
-  uint16_t               FanMaximumRpm;
   uint16_t               FanMinimumPwm;
-  uint16_t               FanAcousticLimitRpm;
+  uint16_t               AcousticTargetRpmThreshold;
+  uint16_t               AcousticLimitRpmThreshold;
   uint16_t               FanTargetTemperature; // Degree Celcius
   uint8_t                FanZeroRpmEnable;
   uint8_t                FanZeroRpmStopTemp;
   uint8_t                FanMode;
-  uint8_t                Padding[1];
-
+  uint8_t                MaxOpTemp;
 
   uint32_t               Spare[13];
 
@@ -997,7 +995,8 @@ typedef struct {
   uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms
   uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms
 
-  uint32_t       SpareVmin[12];
+  QuadraticInt_t Vmin_droop;
+  uint32_t       SpareVmin[9];
 
 
   //SECTION: DPM Configuration 1
@@ -1286,7 +1285,6 @@ typedef struct {
   uint32_t    PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued
   uint32_t    BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS
 
-
   // SECTION: Board Reserved
   uint32_t     BoardSpare[64];
 
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
index 2b44d41a5157..afa1991e26f9 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
@@ -30,7 +30,7 @@
 #define SMU13_DRIVER_IF_VERSION_ALDE 0x08
 #define SMU13_DRIVER_IF_VERSION_SMU_V13_0_4 0x04
 #define SMU13_DRIVER_IF_VERSION_SMU_V13_0_5 0x04
-#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_0 0x27
+#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_0 0x28
 #define SMU13_DRIVER_IF_VERSION_SMU_V13_0_7 0x28
 
 #define SMU13_MODE1_RESET_WAIT_TIME_IN_MS 500  //500ms
-- 
2.29.0



More information about the amd-gfx mailing list