[PATCH 02/33] drm/amd/display: Remove FPU guards from the DML folder

[Rodrigo Siqueira]

As part of the programming expectation for using DML functions, DC
requires that any DML function invoked outside DML uses:

 DC_FP_START();
 ... dml function ...
 DC_FP_END();

Additionally, all the DML functions that can be invoked outside the DML
folder call the function dc_assert_fp_enabled(), which is responsible
for triggering a warning in the case that the DML function was not
guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END
inside DML is wrong, and this commit removes all of those references.

Reviewed-by: Nevenko Stupar <Nevenko.Stupar at amd.com>
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
 .../drm/amd/display/dc/dml/dcn30/dcn30_fpu.c    |  2 --
 .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c    | 17 +----------------
 2 files changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
index e1e92daba668..d4c0f9cdac8e 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
@@ -520,9 +520,7 @@ void dcn30_fpu_calculate_wm_and_dlg(
 		pipe_idx++;
 	}
 
-	DC_FP_START();
 	dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
-	DC_FP_END();
 
 	if (!pstate_en)
 		/* Restore full p-state latency */
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 819de0f11012..d8e68f13c288 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1191,9 +1191,7 @@ static void dcn32_full_validate_bw_helper(struct dc *dc,
 			}
 		} else {
 			// Most populate phantom DLG params before programming hardware / timing for phantom pipe
-			DC_FP_START();
 			dcn32_helper_populate_phantom_dlg_params(dc, context, pipes, *pipe_cnt);
-			DC_FP_END();
 
 			/* Call validate_apply_pipe_split flags after calling DML getters for
 			 * phantom dlg params, or some of the VBA params indicating pipe split
@@ -1494,11 +1492,8 @@ bool dcn32_internal_validate_bw(struct dc *dc,
 
 	dml_log_pipe_params(&context->bw_ctx.dml, pipes, pipe_cnt);
 
-	if (!fast_validate) {
-		DC_FP_START();
+	if (!fast_validate)
 		dcn32_full_validate_bw_helper(dc, context, pipes, &vlevel, split, merge, &pipe_cnt);
-		DC_FP_END();
-	}
 
 	if (fast_validate ||
 			(dc->debug.dml_disallow_alternate_prefetch_modes &&
@@ -2145,9 +2140,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
 		entry.fabricclk_mhz = 0;
 		entry.dram_speed_mts = 0;
 
-		DC_FP_START();
 		insert_entry_into_table_sorted(table, num_entries, &entry);
-		DC_FP_END();
 	}
 
 	// Insert the max DCFCLK
@@ -2155,9 +2148,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
 	entry.fabricclk_mhz = 0;
 	entry.dram_speed_mts = 0;
 
-	DC_FP_START();
 	insert_entry_into_table_sorted(table, num_entries, &entry);
-	DC_FP_END();
 
 	// Insert the UCLK DPMS
 	for (i = 0; i < num_uclk_dpms; i++) {
@@ -2165,9 +2156,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
 		entry.fabricclk_mhz = 0;
 		entry.dram_speed_mts = bw_params->clk_table.entries[i].memclk_mhz * 16;
 
-		DC_FP_START();
 		insert_entry_into_table_sorted(table, num_entries, &entry);
-		DC_FP_END();
 	}
 
 	// If FCLK is coarse grained, insert individual DPMs.
@@ -2177,9 +2166,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
 			entry.fabricclk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
 			entry.dram_speed_mts = 0;
 
-			DC_FP_START();
 			insert_entry_into_table_sorted(table, num_entries, &entry);
-			DC_FP_END();
 		}
 	}
 	// If FCLK fine grained, only insert max
@@ -2188,9 +2175,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
 		entry.fabricclk_mhz = max_fclk_mhz;
 		entry.dram_speed_mts = 0;
 
-		DC_FP_START();
 		insert_entry_into_table_sorted(table, num_entries, &entry);
-		DC_FP_END();
 	}
 
 	// At this point, the table contains all "points of interest" based on
-- 
2.35.1