[PATCH v2 1/2] drm/amd/display: move remaining FPU code to dml folder
Ao Zhong
hacc1225 at gmail.com
Wed Oct 26 10:41:52 UTC 2022
Hello Christian,
thank you for your review. I got a warning in checking the first patch with checkpatch.pl.
I'll fix it in the next version.
---------------------------------------------------------------
0001-drm-amd-display-move-remaining-FPU-code-to-dml-folde.patch
---------------------------------------------------------------
WARNING:braces {} are not necessary for single statement blocks
#131: FILE: drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c:157:
+ if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
+ dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 20.80f;
+ }
total: 0 errors, 1 warnings, 110 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
0001-drm-amd-display-move-remaining-FPU-code-to-dml-folde.patch has style problems, please review.
---------------------------------------------------------------
0002-drm-amd-display-move-remaining-FPU-code-to-dml-folde.patch
---------------------------------------------------------------
total: 0 errors, 0 warnings, 29 lines checked
0002-drm-amd-display-move-remaining-FPU-code-to-dml-folde.patch has no obvious style problems and is ready for submission.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Am 26.10.22 um 09:19 schrieb Christian König:
> Am 25.10.22 um 23:17 schrieb Ao Zhong:
>> In the process of enabling DCN support for arm64, I found that the
>> dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still
>> needs to use FPU. This will cause compilation to fail on ARM64 platforms
>> because -mgeneral-regs-only is enabled by default to disable the
>> hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to
>> dml/dcn10 folder to enable hardware FPU for that function.
>
> Of hand that looks good to me, but our display team needs to take a look.
>
> Feel free to add an Acked-by: Christian König <christian.koenig at amd.com> for the series.
>
> While at it could you make sure that checkpatch.pl doesn't has anything to complain about the moved code?
>
> Thanks for the help,
> Christian.
>
>>
>> Signed-off-by: Ao Zhong <hacc1225 at gmail.com>
>> ---
>> .../drm/amd/display/dc/dcn10/dcn10_resource.c | 44 +------------------
>> .../drm/amd/display/dc/dml/dcn10/dcn10_fpu.c | 38 ++++++++++++++++
>> .../drm/amd/display/dc/dml/dcn10/dcn10_fpu.h | 2 +
>> 3 files changed, 42 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
>> index 56d30baf12df..6bfac8088ab0 100644
>> --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
>> +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
>> @@ -1295,47 +1295,6 @@ static uint32_t read_pipe_fuses(struct dc_context *ctx)
>> return value;
>> }
>> -/*
>> - * Some architectures don't support soft-float (e.g. aarch64), on those
>> - * this function has to be called with hardfloat enabled, make sure not
>> - * to inline it so whatever fp stuff is done stays inside
>> - */
>> -static noinline void dcn10_resource_construct_fp(
>> - struct dc *dc)
>> -{
>> - if (dc->ctx->dce_version == DCN_VERSION_1_01) {
>> - struct dcn_soc_bounding_box *dcn_soc = dc->dcn_soc;
>> - struct dcn_ip_params *dcn_ip = dc->dcn_ip;
>> - struct display_mode_lib *dml = &dc->dml;
>> -
>> - dml->ip.max_num_dpp = 3;
>> - /* TODO how to handle 23.84? */
>> - dcn_soc->dram_clock_change_latency = 23;
>> - dcn_ip->max_num_dpp = 3;
>> - }
>> - if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
>> - dc->dcn_soc->urgent_latency = 3;
>> - dc->debug.disable_dmcu = true;
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 41.60f;
>> - }
>> -
>> -
>> - dc->dcn_soc->number_of_channels = dc->ctx->asic_id.vram_width / ddr4_dram_width;
>> - ASSERT(dc->dcn_soc->number_of_channels < 3);
>> - if (dc->dcn_soc->number_of_channels == 0)/*old sbios bug*/
>> - dc->dcn_soc->number_of_channels = 2;
>> -
>> - if (dc->dcn_soc->number_of_channels == 1) {
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 19.2f;
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 = 17.066f;
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 = 14.933f;
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 = 12.8f;
>> - if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
>> - dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 20.80f;
>> - }
>> - }
>> -}
>> -
>> static bool verify_clock_values(struct dm_pp_clock_levels_with_voltage *clks)
>> {
>> int i;
>> @@ -1510,8 +1469,9 @@ static bool dcn10_resource_construct(
>> memcpy(dc->dcn_ip, &dcn10_ip_defaults, sizeof(dcn10_ip_defaults));
>> memcpy(dc->dcn_soc, &dcn10_soc_defaults, sizeof(dcn10_soc_defaults));
>> - /* Other architectures we build for build this with soft-float */
>> + DC_FP_START();
>> dcn10_resource_construct_fp(dc);
>> + DC_FP_END();
>> if (!dc->config.is_vmin_only_asic)
>> if (ASICREV_IS_RAVEN2(dc->ctx->asic_id.hw_internal_rev))
>> diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c
>> index 99644d896222..8b5e6fff5444 100644
>> --- a/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c
>> +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c
>> @@ -27,6 +27,8 @@
>> #include "dcn10/dcn10_resource.h"
>> #include "dcn10_fpu.h"
>> +#include "resource.h"
>> +#include "amdgpu_dm/dc_fpu.h"
>> /**
>> * DOC: DCN10 FPU manipulation Overview
>> @@ -121,3 +123,39 @@ struct _vcs_dpi_soc_bounding_box_st dcn1_0_soc = {
>> .writeback_dram_clock_change_latency_us = 23.0,
>> .return_bus_width_bytes = 64,
>> };
>> +
>> +void dcn10_resource_construct_fp(struct dc *dc)
>> +{
>> + dc_assert_fp_enabled();
>> + if (dc->ctx->dce_version == DCN_VERSION_1_01) {
>> + struct dcn_soc_bounding_box *dcn_soc = dc->dcn_soc;
>> + struct dcn_ip_params *dcn_ip = dc->dcn_ip;
>> + struct display_mode_lib *dml = &dc->dml;
>> +
>> + dml->ip.max_num_dpp = 3;
>> + /* TODO how to handle 23.84? */
>> + dcn_soc->dram_clock_change_latency = 23;
>> + dcn_ip->max_num_dpp = 3;
>> + }
>> + if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
>> + dc->dcn_soc->urgent_latency = 3;
>> + dc->debug.disable_dmcu = true;
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 41.60f;
>> + }
>> +
>> +
>> + dc->dcn_soc->number_of_channels = dc->ctx->asic_id.vram_width / ddr4_dram_width;
>> + ASSERT(dc->dcn_soc->number_of_channels < 3);
>> + if (dc->dcn_soc->number_of_channels == 0)/*old sbios bug*/
>> + dc->dcn_soc->number_of_channels = 2;
>> +
>> + if (dc->dcn_soc->number_of_channels == 1) {
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 19.2f;
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 = 17.066f;
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 = 14.933f;
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 = 12.8f;
>> + if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
>> + dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 20.80f;
>> + }
>> + }
>> +}
>> diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h
>> index e74ed4b4ce5b..63219ecd8478 100644
>> --- a/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h
>> +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h
>> @@ -27,4 +27,6 @@
>> #ifndef __DCN10_FPU_H__
>> #define __DCN10_FPU_H__
>> +void dcn10_resource_construct_fp(struct dc *dc);
>> +
>> #endif /* __DCN20_FPU_H__ */
>
More information about the amd-gfx
mailing list