[PATCH v6 28/57] drm_print: refine drm_debug_enabled for jump-label
jim.cromie at gmail.com
jim.cromie at gmail.com
Fri Sep 9 23:42:55 UTC 2022
On Wed, Sep 7, 2022 at 12:40 AM Daniel Vetter <daniel at ffwll.ch> wrote:
>
> On Sun, Sep 04, 2022 at 03:41:05PM -0600, Jim Cromie wrote:
> > In order to use dynamic-debug's jump-label optimization in drm-debug,
> > its clarifying to refine drm_debug_enabled into 3 uses:
> >
> > 1. drm_debug_enabled - legacy, public
> > 2. __drm_debug_enabled - optimized for dyndbg jump-label enablement.
> > 3. _drm_debug_enabled - pr_debug instrumented, observable
> >
> > 1. The legacy version always checks the bits.
> >
> > 2. is privileged, for use by __drm_dbg(), __drm_dev_dbg(), which do an
> > early return unless the category is enabled. For dyndbg builds, debug
> > callsites are selectively "pre-enabled", so __drm_debug_enabled()
> > short-circuits to true there. Remaining callers of 1 may be able to
> > use 2, case by case.
> >
> > 3. is 1st wrapped in a macro, with a pr_debug, which reports each
> > usage in /proc/dynamic_debug/control, making it observable in the
> > logs. The macro lets the pr_debug see the real caller, not an inline
> > function.
> >
> > When plugged into 1, 3 identified ~10 remaining callers of the
> > function, leading to the follow-on cleanup patch, and would allow
> > activating the pr_debugs, estimating the callrate, and the potential
> > savings by using the wrapper macro. It is unused ATM, but it fills
> > out the picture.
> >
> > Signed-off-by: Jim Cromie <jim.cromie at gmail.com>
>
> So instead of having 3 here as a "you need to hack it in to see what
> should be converted" I have a bit a different idea: Could we make the
> public version also a dyndbg callsite (like the printing wrappers), but
> instead of a dynamic call we'd have a dynamically fixed value we get out?
> I think that would take care of everything you have here as an open.
>
> Otherwise I'd just drop 3 for the series we're going to merge.
> -Daniel
>
OK - So here it is in use again, with modules drm amdgpu i915 loaded + deps
:#> grep todo /proc/dynamic_debug/control
drivers/gpu/drm/drm_edid_load.c:178 [drm]edid_load =_ "todo: maybe
avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:410 [drm]drm_crtc_accurate_vblank_count
=_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:787
[drm]drm_crtc_vblank_helper_get_vblank_timestamp_internal =_ "todo:
maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1491 [drm]drm_vblank_restore =_ "todo:
maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1433 [drm]drm_vblank_enable =_ "todo:
maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_plane.c:2168 [drm]drm_mode_setplane =_ "todo:
maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1359
[drm_display_helper]drm_dp_mst_wait_tx_reply =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2864
[drm_display_helper]process_single_tx_qlock =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2909
[drm_display_helper]drm_dp_queue_down_tx =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1686
[drm_display_helper]drm_dp_mst_update_slots =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/i915/display/intel_dp.c:1111
[i915]intel_dp_print_rates =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5434
[i915]cnp_enable_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5459
[i915]intel_backlight_device_register =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:43
[i915]intel_opregion_notify_encoder =_ "todo: maybe avoid via
dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:53
[i915]asle_set_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_bios.c:1088
[i915]intel_bios_is_dsi_present =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_display_debugfs.c:6153
[i915]i915_drrs_ctl_set =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/intel_pcode.c:26 [i915]snb_pcode_read =_ "todo:
maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/i915_getparam.c:785 [i915]i915_getparam_ioctl =_
"todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:282
[amdgpu]vcn_v2_5_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:433
[amdgpu]vcn_v2_0_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
w/o actually looking, the vblank debug could be called frequently.
I'll build on my amdgpu box to run on real hardware.
And Im inclined to restore the instrumented version (with the "todo:")
care to suggest a better message than "maybe avoid" ?
More information about the amd-gfx
mailing list