[PATCH 13/47] drm/amd/display: Add debug option for allocating extra way for cursor

[Wayne Lin]

From: Alvin Lee <Alvin.Lee2 at amd.com>

[Why and How]
- Add a debug option for allocating extra way for cursor
- Remove usage of cache_cursor_addr since it's not gaurenteed
  to be populated
- Include cursor size in MALL calculation if it exceeds the
  DCN cursor buffer size (and don't need extra way for cursor)

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai at amd.com>
Acked-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2 at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h                    |  1 +
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c     | 10 ++++++----
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c  |  1 +
 .../gpu/drm/amd/display/dc/dcn321/dcn321_resource.c    |  1 +
 4 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 53b13beff0b2..af726ffeb0d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -832,6 +832,7 @@ struct dc_debug_options {
 	bool force_subvp_mclk_switch;
 	bool allow_sw_cursor_fallback;
 	unsigned int force_subvp_num_ways;
+	bool alloc_extra_way_for_cursor;
 	bool force_usr_allow;
 	/* uses value at boot and disables switch */
 	bool disable_dtb_ref_clk_switch;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index c6d2a05ded3d..931dcf3e5ada 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -304,7 +304,8 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c
 				 * using the max for calculation
 				 */
 				if (hubp->curs_attr.width > 0) {
-					cursor_size = hubp->curs_attr.width * hubp->curs_attr.height;
+					// Round cursor width to next multiple of 64
+					cursor_size = (((hubp->curs_attr.width + 63) / 64) * 64) * hubp->curs_attr.height;
 					break;
 				}
 		}
@@ -325,7 +326,8 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c
 			break;
 		}
 
-		if (stream->cursor_position.enable && plane->address.grph.cursor_cache_addr.quad_part) {
+		if (stream->cursor_position.enable && !dc->debug.alloc_extra_way_for_cursor &&
+				cursor_size > 16384) {
 			cache_lines_used += dcn32_cache_lines_for_surface(dc, cursor_size,
 					plane->address.grph.cursor_cache_addr.quad_part);
 		}
@@ -345,8 +347,8 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c
 			plane = ctx->stream_status[i].plane_states[j];
 
 			if (stream->cursor_position.enable && plane &&
-				!plane->address.grph.cursor_cache_addr.quad_part &&
-				cursor_size > 16384) {
+					dc->debug.alloc_extra_way_for_cursor &&
+					cursor_size > 16384) {
 				/* Cursor caching is not supported since it won't be on the same line.
 				 * So we need an extra line to accommodate it. With large cursors and a single 4k monitor
 				 * this case triggers corruption. If we're at the edge, then dont trigger display refresh
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
index d757d1638fa7..dad174a52449 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
@@ -720,6 +720,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.enable_single_display_2to1_odm_policy = true,
 	.enable_dp_dig_pixel_rate_div_policy = 1,
 	.allow_sw_cursor_fallback = false,
+	.alloc_extra_way_for_cursor = true,
 };
 
 static const struct dc_debug_options debug_defaults_diags = {
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
index 60bf6e1b2972..1068230f16ee 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
@@ -720,6 +720,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.enable_single_display_2to1_odm_policy = true,
 	.enable_dp_dig_pixel_rate_div_policy = 1,
 	.allow_sw_cursor_fallback = false,
+	.alloc_extra_way_for_cursor = true,
 };
 
 static const struct dc_debug_options debug_defaults_diags = {
-- 
2.37.3