[PATCH V3 15/47] drm/amd/display: Disable SubVP on driver disable

[Wayne Lin]

From: Alvin Lee <Alvin.Lee2 at amd.com>

[Why and How]
- For driver disable cases in current implementation, if P-State
  is unsupported or still supported by firmware, we force it
  supported by DCN.

- SubVP now needs to be included in this case along with FPO.

Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2 at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h  |  1 +
 .../drm/amd/display/dc/dcn30/dcn30_hwseq.c    | 21 ++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
index 9f5b47b9a83d..7e438345b1a8 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
@@ -85,6 +85,7 @@ void dc_dmub_srv_send_inbox0_cmd(struct dc_dmub_srv *dmub_srv, union dmub_inbox0
 
 bool dc_dmub_srv_get_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv, struct dmub_diagnostic_data *dmub_oca);
 
+void dc_dmub_setup_subvp_dmub_command(struct dc *dc, struct dc_state *context, bool enable);
 void dc_dmub_srv_log_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv);
 
 #endif /* _DMUB_DC_SRV_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index fb59fed8f425..4a1954fe3f7e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -939,13 +939,32 @@ bool dcn30_does_plane_fit_in_mall(struct dc *dc, struct dc_plane_state *plane, s
 
 void dcn30_hardware_release(struct dc *dc)
 {
+	bool subvp_in_use = false;
+	uint8_t i;
+
 	dc_dmub_srv_p_state_delegate(dc, false, NULL);
+	dc_dmub_setup_subvp_dmub_command(dc, dc->current_state, false);
+
+	/* SubVP treated the same way as FPO. If driver disable and
+	 * we are using a SubVP config, disable and force on DCN side
+	 * to prevent P-State hang on driver enable.
+	 */
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
 
+		if (!pipe->stream)
+			continue;
+
+		if (pipe->stream->mall_stream_config.type == SUBVP_MAIN) {
+			subvp_in_use = true;
+			break;
+		}
+	}
 	/* If pstate unsupported, or still supported
 	 * by firmware, force it supported by dcn
 	 */
 	if (dc->current_state)
-		if ((!dc->clk_mgr->clks.p_state_change_support ||
+		if ((!dc->clk_mgr->clks.p_state_change_support || subvp_in_use ||
 				dc->current_state->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) &&
 				dc->res_pool->hubbub->funcs->force_pstate_change_control)
 			dc->res_pool->hubbub->funcs->force_pstate_change_control(
-- 
2.37.3